The new EE211 calculates the dew point temperature (Td) based on the RH and temperature values measured by the heated humidity probe.

New York, NY -- (SBWIRE) -- 11/23/2016 -- Continuous high relative humidity (RH) can impair the long-term stability and accuracy of humidity sensors. Therefore, the new EE211 humidity transmitter from the Austrian sensor specialist E+E Elektronik features a heated sensing probe. This leads to best accuracy and long-term stability in high-humidity (>85% RH) and even in condensing environment.

The EE211 is designed for accurate humidity and temperature measurement under continuous high-humidity or condensing conditions. The device is ideal for climate control in fruit and vegetable storage, in greenhouses, incubators, ripening processes or in mushroom growing.

Heated humidity probe:

In order to avoid drift effects due to long-term exposure of the sensing elements to high humidity, the sensor head of the EE211 humidity probe is continuously heated. The permanent over-temperature leads to max. 80% RH at the sensor. Condensation-related dirt deposits as well as corrosion of the sensor are thereby prevented. Furthermore, the unique E+E protective coating also protects the active sensor surface from contamination and corrosive influences. The combination of these features results in considerably improved long-term stability and increases both the service life and the measuring performance of the sensor.

Measured values and interfaces:

The EE211 calculates the dew point temperature (Td) based on the RH and temperature values measured by the heated humidity probe. A separate, interchangeable temperature probe measures the ambient temperature (T). From Td and T the EE211 calculates back the ambient relative humidity as well as additional physical quantities like absolute humidity, mixing ratio, wet-bulb temperature or specific enthalpy.

The measured values are available on the Modbus RTU interface or on two analogue current or voltage outputs. The optional backlit display can show up to three measurands simultaneously.

Easy configuration and adjustment:

The Modbus RTU parameters, the scaling of the analogue outputs and the display layout can be set with the free configuration software. The user can also carry out one or two-point humidity and temperature adjustment. The temperature probe can also be calibrated separately.

Optimally protected electronics:

The IP65/NEMA 4 enclosure offers optimal protection for the EE211 electronics. Additionally, for best performance even in aggressive environment, the measuring electronics inside the humidity probe are fully encapsulated.

About E+E Elektronik
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.

For Media Contact:
Company: E+E Elektronik GmbH
Name: Johannes Fraundorfer
Telephone: 73256050
Email: pr@epluse.at
Website: http://www.epluse.com

For the original version on IndustrialPR visit: http://www.industrialpr.net/news/classified.php?listing=16597

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

E+E Elektronik introduces its latest, highly accurate and innovative modular CO2 transmitter

New York, NY -- (SBWIRE) -- 05/16/2016 -- The modular CO2 transmitter EE870 from E+E Elektronik now measures CO2 concentration up to 5% CO2 (50,000 ppm). The extended measuring range makes the EE870, consisting of CO2 probe, conversion board and connection cable, even more versatile. The interchangeable CO2 probe EE871 with auto-calibration uses an infrared measuring principle (dual wavelength NDIR operation principle) that is particularly insensitive to pollution. Aging effects are compensated automatically, resulting in excellent long-term stability. Thus the CO2 transmitter is ideal for demanding applications.

The multi-point CO2 and temperature adjustment ensures high accuracy over the entire temperature working range of -40...60 °C (-40...140 °F). Additionally, the IP65 probe enclosure with interchangeable PTFE filter offers excellent protection against pollution. Therefore, the CO2 probe can be used in harsh environments such as in agriculture (stables, hatchers, incubators).

The compact design, the M12 connector and the optional mounting flange allow for fast installation or replacement of the CO2 probe. An optional radiation shield is available for outdoor applications.

The measured data range of up to 5 % CO2 (50,000 ppm) is available on the analog current or voltage output and on the Modbus RTU interface of the conversion board. An optional kit facilitates easy configuration and adjustment of the EE871 probe.

About E+E Elektronik
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV)) to provide the national standards for humidity and air velocity.

For the original version on IndustrialPR visit: http://www.industrialpr.net/news/classified.php?listing=16088

For Media Contact:
Person Name: Johannes Fraundorfer
Company: E+E Elektronik GmbH
Phone: 73256050
Email Id: pr@epluse.at
Website: http://www.epluse.com/

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm