Keep expansion joints for concrete flooring in good repair with these two recommendations and steps to DIY repair

Mattituck, NY -- (SBWIRE) -- 05/24/2018 -- When it comes to keeping concrete flooring in good repair, the key factor is to repair the expansion joints. Since the expansion joints allow for the expansion and contraction of the concrete, having functional joints is crucial to prevent cracking. When it comes to repair, Capital Industries, an expansion joint repair supplier, has products and suggestions to make this repair easy with a few simple steps to complete.

Expansion joint and crack filler is used for cement crack repairs. It is a waterproof cement product that is sold as a resin and mixed with a hardener to prepare the mixed components. It is then poured into the foundation's crack, on concrete, or into a joint. Here we talk about how to select one of, and use, the right products for fixing or repairing surface cracks on poured concrete flooring, concrete walls, or walls created from brick or masonry blocks.

- Polyflex Epoxy Crack Repair is a concrete product with two parts and effectively fills cracks and expansion joints in concrete. It is a filler and sealer that resists damage caused by traffic and vibrational stress by equipment. Epoxy concrete repair generally entails repairing cracks in concrete flooring or patching pits and scales in regions on the surface of the ground. It's easy to mix and pour into the fracture or expansion joint to have the area open for use again in as little as 60 minutes.

- Kwik-Flex is a crack and expansion joint filler repair product that was designed to use in low temperature areas of -60 degrees Fahrenheit. It also provides a fast-acting seal to use the area again in only 60 minutes. It is easily mixed from a powder into the liquid to form the sealant needed to pour into the cracks.

Capital Industries Lists the Main Steps to Expansion Joint Repair

1. For any DIYer or maintenance personnel, getting the joint as clean as possible is essential. Use a wire brush to sweep away any dirt and debris. Having a clean expansion joint will allow a good seal after removing the old sealant material.

2. Use a small chisel, screwdriver, or other tool to scrape the old filler out of the joint. Rinsing the joint with a hose will clear any loose debris out.

3. Fix any blemishes and cracks running along the cement. We carry a high-strength concrete floor repair product called KwikBond. It sets quickly in any temperature range.

4. Install insulation to keep moisture out of the joint. Use a putty knife to press the installation into the joint, and leave a space between the edge for the sealant to spread flush with the pavement.

5. Prepare the edge of the pavement by running masking tape along the edges of the joint. This procedure keeps sealant from creating lumps on top of the pavement.

6. Seal the insulation with a sealer and compact it into the joint using a board and hammer over the top of it.

7. All that's left is to wait for the recommended amount of time for the repair to harden and dry before removing the masking tape.

About Capital Industries
Capital Industries, Inc. is a leading supplier of concrete crack repair and concrete floor repair products. For over 30 years, we have proudly serviced contractors, factories, warehouses and distribution centers for industrial, institutional and commercial customers. We carry a full range of concrete repair materials, including those specifically designed for low temperature areas such as freezers and coolers. Our floor repair products are rapid hardening, allowing you to reopen repaired areas with minimal downtime. All of our products are designed to be used by in-house maintenance personnel and come with an ironclad 100% guarantee of satisfaction.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Cracked concrete floors cannot be ignored without incurring more damage and can easily be fixed with concrete crack repair products.

Mattituck, NY -- (ReleaseWire) -- 01/24/2018 -- Cracks in concrete cannot be ignored. They will grow into larger problems and corrode the foundation or driveway. Whether the crack in concrete is at a residential home, a commercial or industrial building, or a driveway, Capital Industries helps repair the damage with cost-effective concrete crack repair products.

Damages to concrete can be caused by weather, wear and tear from daily use, or events that happen. The compromise of the foundation on which a building stands can lead to greater challenges if not fixed right away. Repairs can then get costly if left unattended. Take steps to prevent further damage from cracked concrete.

Damages to concrete may not only result in cracked floors. The damage can also include chips and spalls. Whether the issue is cracks, chips, or spalls, the damage that is visible can lead to a spread in more damage if not fixed.

A concrete floor patch, such as Kwik-Bond, can be applied over the crack, spall, or chip to patch and resurface the damaged concrete area. It can be applied to damp surfaces and feather-edged to provide a smooth surface. Kwik-Bond is also applicable to frozen surfaces, such as freezers, coolers, and holding boxes. The product sets up and cures without needing to increase surface temperatures, use propane torches, or heating lamps.

Applying Kwik-Bond is easy to do for any DIYer. It's easily mixed and applied with a trowel to the damaged concrete surface. Once the repair patch is in place, traffic to that area can resume within one hour.

Capital Industries has several concrete repair products available for many different applications. These include:

- Concrete Floor Repair
- Expansion Joint and Crack Filler
- Freezer and Cooler Floor Repair
- Concrete Floor Coating
- Concrete Sealer
- Concrete Wall and Ceiling Repair
- Driveway and Patio Repair

If an hour is too long to wait, Capital Industries has professional commercial concrete repair products that can reopen an area to traffic in as little as 10-15 minutes.

To view available concrete repair products and solutions by Capital Industries, visit http://www.KwikBond.com or call for a friendly consultation at 631-298-6300.

About Capital Industries
Capital Industries, Inc. is a leading supplier of concrete crack repair and concrete floor repair products. For over 30 years, we have proudly serviced contractors, factories, warehouses and distribution centers for industrial, institutional and commercial customers. We carry a full range of concrete repair materials, including those specifically designed for low temperature areas such as freezers and coolers. Our floor repair products are rapid hardening, allowing you to reopen repaired areas with minimal downtime. All of our products are designed to be used by in-house maintenance personnel and come with an ironclad 100% guarantee of satisfaction.

Contact:
Len Garrett
http://www.kwikbond.com
info@kwikbond.com
Phone: 631-298-6300
Fax: 631-298-2077
PO Box 1693 Mattituck, NY 11952

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Mattituck, NY -- (SBWIRE) -- 09/29/2017 -- It is important for organizations to ensure that their employees are working in a safe environment. Reliable and safe floors must be encouraged in every place of work. If a floor has some cracks, even if they are small, there is a possibility of tripping and falling which can be dangerous.

The good thing is that this is a situation that is preventable. For companies to achieve safety success, KwikBond shares why companies should fix cracked flooring and ways to respond to the problems that are associated with commercial concrete crack repair. Read on to know why there is a need for industrial concrete repair.

Not only does a company need to provide a safe working environment for employees, but also for customers. If a commercial building has customer traffic in and out, the flooring can be a hazard if there are cracks and chipped concrete. Trips and falls happen more often on flooring that has been damaged.

A company that uses forklifts and other equipment often has more concrete cracks than others. The equipment can cause stress to the flooring due to their weight and frequent use. Repair these cracks, chips, and other damages to ensure that productivity is not slowed down. Slower productivity and use of equipment often results in lower sales volume.

A company can learn which products are the most effective for their application of concrete repair. See below for tips on which products to use.

Products to Use

There are many reasons for considering industrial concrete repair. And it is equally important to know which products to use. The products that companies choose from may depend on how severe the cracks are in the floor. The quality of the product a company uses is also crucial. A commercial concrete flooring crack can be repaired, leaving it firm for many years with the right product. One ingredient that is best in concrete repair is epoxy.

Use of Epoxy

One of the best ways of dealing with cracks that are non-moving is the injection of an epoxy concrete repair product. It is an excellent method of repair as it gives the concrete its strength regarding structure.

Advantages

- Restores structures
- Has higher bond strength compared to concrete
- It is safe for surfaces that are dry
- Applicable to many surfaces

Disadvantages

- It is not useful regarding moving foundations
- If it is applied on wet surfaces, there is drastic decrease in bond strength
- Costs higher than urethanes

Important Steps To Follow In Repairing Concrete Flooring

1. Before starting the process of repair, find out what caused the crack. A concrete repair job will fail if the cause of the crack is not fixed. The issue could still cause another crack to happen after the repair.

2. After the identification of what has caused the crack, determine whether injection is the best solution. There are other products that can fix concrete cracks, depending on the severity of the crack.

3. It's always important to prepare the surface of the concrete. Some products will work in wet environments and some will not. In order to ensure a proper fix and safe conditions, check the product to be sure the surface is prepared properly.

It is important to note that contaminants and liquids can have effects on the epoxy, reducing its effectiveness.

4. Clean the crack surface before starting. It can be done with compressed air as it removes particles, dust or stagnant water quickly. To remove these items before repairing a concrete surface will ensure a long-lasting repair and safer environment for employees and customers.

Visit http://www.Kwikbond.com for help with choosing the right commercial concrete repair products.

About Capital Industries, Inc.
Capital Industries, Inc. is a leading supplier of commercial and industrial concrete repair products. For over 30 years, we have proudly serviced contractors, factories, warehouses and distribution centers for industrial, institutional and commercial customers. We carry a full range of concrete repair materials, including those specifically designed for low temperature areas such as freezers and coolers. Our floor repair products are rapid hardening, allowing you to reopen repaired areas with minimal downtime. All of our products are designed to be used by in-house maintenance personnel and come with an ironclad 100% guarantee of satisfaction.

Contact:
Len Garrett
http://www.kwikbond.com
info@kwikbond.com
Phone: 631-298-6300
Fax: 631-298-2077
Address: PO Box 1693 Mattituck, NY 11952

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Capital Industries, Inc. has 4 tips to enhance the safety of concrete flooring in the buildings of businesses.

Mattituck, NY -- (SBWIRE) -- 06/05/2017 -- Capital Industries, Inc. is a leading supplier of concrete crack repair and concrete floor repair products for over 30 years. They've proudly served contractors, factories, warehouses, and distribution centers for industrial, institutional, and commercial customers. Capital Industries highlights the benefits of their Repore concrete sealer. This product is used to help businesses enhance the safety of their concrete floors and ensure the optimal performance for many years to come.

1. Resistance to Strong Flooring Impact

Areas where businesses use heavy equipment often see a lot of flooring impact that can damage concrete. Businesses where Repore concrete sealer would be ideal include warehouses. Any businesses that have vehicular traffic, such as forklifts and pallet jacks, would benefit from sealing the concrete flooring. The commercial concrete sealer can retain the flooring's performance for many years.

2. Resistance to Abrasion

Over time, concrete floors are impacted by abrasion. The use of heavy equipment, such as forklifts and pallet jacks, and continuous foot traffic can cause chips in the surface of the concrete that leads to heavier damage. Using an industrial concrete sealer such as Repore provides resistance to high levels of abrasion. When floors are maintained properly, Repore provides resistance to any and all abrasion to industrial flooring.

3. Easy Maintenance for Flooring

Perhaps the biggest draw to using Repore as a commercial concrete sealer is the fact the flooring can be maintained easily by staff in-house. The product provides dust-proof performance and simple maintenance. Many maintenance departments remark on how using Repore improves productivity because they no longer have to spend hours in maintenance or cleaning the floors.

4. Resistance to Marring

A company's flooring needs to also maintain aesthetic appeal. When companies invite potential clients into their industrial space, having a clean, aesthetic-looking floor can help make or break deals. Repore has mar resistance to ensure a floor will retain its aesthetic value for many years. Companies will see that the high gloss level gives the appearance of being like-new.

Repore commercial concrete sealer brings immense value to a company who seeks to enhance the safety and durability of the flooring. Companies who use the flooring constantly and need optimal performance can use Repore to maximize their in-house productivity for many years.

About KwikBond
Capital Industries, Inc. is a leading supplier of commercial and industrial concrete repair products. For over 30 years, we have proudly serviced contractors, factories, warehouses and distribution centers for industrial, institutional and commercial customers. We carry a full range of concrete repair materials, including those specifically designed for low temperature areas such as freezers and coolers. Our floor repair products are rapid hardening, allowing you to reopen repaired areas with minimal downtime. All of our products are designed to be used by in-house maintenance personnel and come with an ironclad 100% guarantee of satisfaction.

Contact KwikBond
Capital Industries, Inc.
PO Box 1693 Mattituck, NY 11952
Web: http://kwikbond.com
Phone: 631-298-6300
Email: info@kwikbond.com

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm