Lubricants are used for maintaining the performance and efficiency of vehicles over a longer period of time. They protect vehicles against rust and corrosion, transmission of power, and transfer of heat.

Albany, NY -- (SBWIRE) -- 12/21/2017 -- The top three players in the global lubricants market for off-road sector held a share of 31.6% in the overall market in 2015. Royal Dutch Shell Plc., ExxonMobil Corporation, and BP Global have shown incredible dominance in the global market with terrific brand value. These companies are expected to lead the pack in the coming years as they continue to invest in improving their infrastructural facilities and development of newer and better products.

According to the research report, the global lubricants market for off-road sector was valued at US$13.0 bn in 2015 and is anticipated to reach US$16.8 bn by the end of 2024. During the forecast period of 2016 and 2024, the global market is anticipated to expand at a CAGR of 2.9%.

To view TOC of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=18965

lubricants market

Asia Pacific to Dominate Global Market as Automotive Sector Shows Steady Progress

On the basis of product, the global market is segmented into engine oil, hydraulic fluids, transmission fluids, grease, gear oil, and others. Of these, the engine oil segment is estimated to rise at a faster pace than the others. Availability of several brands, growing automotive industry, and rising awareness about maintenance of vehicles are some of the important factors slated to drive this product segment. The report states that this segment will expand at a CAGR of 4.0% during the forecast period.

In terms of geography, the global lubricants market for off-road sector is divided into North America, Asia Pacific, Asia Pacific, Latin America, and the Middle East and Africa. Of these, Asia Pacific is estimated to dominate the global market in the coming years. This regional market is expected to surge at a CAGR of 3.6%. The growing sales of automobiles in the region are anticipated to drive the Asia Pacific lubricants market for off-road sector during the forecast period. Furthermore, the cheaper price of products in the Asia Pacific region has also contributed to the soaring sales of lubricants for off-road sector.

Consistent Maintenance of Old Vehicles Improves Revenue for Global Market

Performance and efficiency of vehicles is adversely affected due to the tough driving condition and the bumper to bumper traffic that compels drive to make excessive usage of clutch and brakes. Such circumstances hamper the engine, negating its performance through the years. Thus, several vehicles owners and sellers insist on using lubricants to keep the engines functioning at optimum efficiency. The growing number of old vehicles in the world have propelled the uptake of lubricants as the need for maintenance is imperative. The consistent production of vehicles along with rising disposable incomes have collectively fueled the consumption of lubricants for the vehicles of the off-road sector.

The report states that Asia Pacific will play a key role in defining the progress of the global lubricants market for off-road sector. The booming mining industry in this region that demands usage of off-road vehicles for transportation, will ensure swift uptake of lubricants during the forecast period.

A sample of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=18965

Efforts to Reduce Carbon Footprint to Restrain Global Market

Stringent regulations pertaining to the usage of off-road vehicles in Europe and North America is expected to have a negative impact on the sale of lubricants. Furthermore, efforts by developed regions to encourage public transport systems to reduce carbon emissions are expected to reduce the uptake lubricants for off-road sector. Introduction of electric cars is also anticipated to restrain the global market from achieving its utmost potential in the near future.

This review is based on Transparency Market Research's report, titled "Lubricants Market for Off-road Sector - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2016–2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

The global marine seismic equipment and acquisition market is highly influenced by the exponential rise in the oil and gas industry as seismic services and various analytical data make a critical part of oil and gas exploration.

Albany, NY -- (SBWIRE) -- 12/21/2017 -- The global marine seismic equipment and acquisition market demonstrates a highly consolidated competitive landscape, finds a new research study by Transparency Market Research (TMR). In 2015, nearly 90% of the whole market was acquired by the top six players, namely, CGG, PGS, TGS, Polarcus DMCC, Fugro N.V., and SeaBird Exploration PLC.

The slowdown in the demand from the main end user of marine seismic equipment and acquisition, that is, the oil and gas industry is expected to intensify the competition within this market substantially in the near future, states the report.

As per TMR's estimations, the global marine seismic equipment market presented an opportunity worth US$0.36 bn in 2015. Expanding at a CAGR of 4.50% during the period from 2016 to 2024, the market is expected to cross US$0.53 bn mark by the end of the forecast period. Over the same period of time, the global market for marine seismic acquisition is estimated to rise from US$3.5 bn in 2015 to US$5.6 bn by 2024, increasing at a CAGR of 5.30%. The 3D survey is the key technology used for marine seismic acquisitions and is projected to continue to lead over the next few years.

A sample of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=2953

marine seismic equipment acquisition market
High Demand for Conventional Oil Reserves to Ensure Europe's Dominance

Europe, Latin America, North America, Asia Pacific, and the Middle East and Africa have been considered as the key regional markets for marine seismic equipment and acquisitions in this research report. With US$944.1 mn in marine seismic acquisition and US$83.1 mn in marine seismic equipment, Europe led this market in 2015. Thanks to the high demand for conventional oil reserves, this regional market is likely to remain seated in the leading position throughout the forecast period.

North America stood second in the global marine seismic equipment and acquisition market in 2015. Analysts predict it to retain its position over the next few years, on account of the substantial growth in the end-use industries, such as mining, construction, and oil and gas. However, the most promising opportunities for growth of the marine seismic equipment and acquisition market is expected to be found in Latin America and the Middle East and Africa.

Latin America, specifically, is anticipated to turn as a highly lucrative market for marine seismic acquisition on account of the augmenting demand from exploration and production firms. The Middle East and Africa, on the other hand, is projected to benefit marine seismic equipment vendors significantly in the near future due to the substantial rise in its oil and gas industry, states the report.

Increasing Oil and Gas Exploration Activities in Emerging Regions to Fuel Demand

"The tremendous rise in the oil and gas industry across the world is the key factor behind the immense growth of the global marine seismic equipment and acquisition market," says an analyst at TMR. Marine seismic acquisitions and various analytical data are a critical part of oil and gas exploration procedures. With the increase in oil and gas exploration activities in emerging regions, such as Latin America and Africa, the demand for these acquisitions is likely to escalate significantly in the near future, propelling the market for marine seismic equipment and acquisitions across the world.

On the other hand, the decrease in seismic survey contracts and the slow demand for marine seismic acquisitions from the oil industry in the Middle East and Europe may hamper the growth of this market to some extent over the forecast period, notes the study.

To view TOC of this report is available upon request @ https://www.transparencymarketresearch.com/report-toc/2953

The study presented here is based on a report by Transparency Market Research (TMR) titled "Marine Seismic Equipment and Acquisition Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

The leading factor currently driving the global EMI shielding materials market is the increase in demand for telecommunications infrastructure across the world. Both private and government entities are pushing for greater sophistication and penetration of electronic grids and devices across all industries, thereby making it necessary to use EMI shields to protect users from electromagnetic radiation.

Albany, NY -- (SBWIRE) -- 12/21/2017 -- The global electromagnetic interference (EMI) shielding materials market features an intense level of competition and has a very low threat of new entrants owing to the stringent regulatory guidelines and the high cost of manufacturing, observes Transparency Market Research in a recent report. The few leading vendors in the market, including HEICO Corporation, 3M, Parker Hannifin Corporation, and Laird, are expected to collectively hold a significant portion of the overall market through the forecast period as well, owing chiefly to well-established manufacturing facilities and brand value.

While the market has promising growth opportunities, it is hard to breach, particularly for new vendors, and faces a threat of substitutes. The rising number of alternatives in the market could eat up revenues and make the market further competitive.

Transparency Market Estimates that the global EMI shielding materials market will exhibit a promising CAGR of 6.7% from 2016 to 2024, rising to an opportunity of US$10.75 bn by 2024 from a valuation of US$6.08 bn in 2015.

To view TOC of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=19091

emi shielding materials market

North America and Europe to Remain Leading Regional Markets

In terms of materials, metals and conductive coatings have conventionally found extensive usage for EMI shielding. While metals continue to remain one of the key choices for EMI shielding, the use of conductive coatings has seen a significant rise in the past years owing to their higher scope of usage across a vast set of applications. The trend is expected to remain strong over the report's forecast period as well and the segment of conductive coatings is expected to account for a significant share in the global market through the report's forecast period.

In terms of geography, the market for EMI shielding in North America is presently the leading revenue contributor to the global market, followed by the market in Europe. Factors such as rapid rise in infrastructure development activities in the telecom sector and the high production capacity of companies domiciled in these regions are key to the strong hold of North America and Europe on the EMI shielding materials market.

Thriving Telecommunications Industry to Present Promising Growth Opportunities

EMI shields find extensive usage in the modern telecom industry in applications related to the loss of data transmission capability caused by electromagnetic interference. As the telecommunication industry is treading along a healthy growth path in developed as well as developing economies, the uptake of EMI shields across new transmission facilities as well as from facilities that are undergoing infrastructure upgrades has increased.

The market for EMI shielding materials is also fueled due to the increased demand for next-generation electronic circuits that facilitate multi-level integration of electronic functions. As complex electronic circuits find their way into common consumer electronics products as well, the scope of usage of electromagnetic interference shields has also increased substantially, which, in turn, is driving the demand for EMI shielding materials.

High Cost of Manufacturing of EMI Shields Keep Small Vendors at Bay

One of the key challenges ahead of the EMI shielding materials market is the high cost of manufacturing EMI shields, especially the ones manufactured for applications in high profile industries such as aerospace and defense. The demand for EMI shields is increasing at a rapid pace in these industries and thus the market for EMI shielding materials has vast growth opportunities.

However, the vast investment requirement in manufacturing facilities and operations to cater to these sectors is indirectly restricting small companies from exploiting them. Stringent regulations associated with the manufacture and use of certain materials in some developed economies across North America and Europe are also restricting the global EMI shielding material market from achieving its potential.

A sample of this report is available upon request @ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=19091

This review of the global EMI shielding materials market is based on a recent Transparency Market Research report, titled "EMI Shielding Materials Market (Materials - Conductive Coatings, Metals, Conductive Plastics, and Laminates; Applications - Defense, Electronics, Automotive, Telecommunications, Aerospace, and Medical) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Plastic Recycling Market (Source - Rigid Packaging and Non-rigid Packaging; Material - PET, PP, HDPE, LDPE, PS, PVC, ABS, Nylon, and Polycarbonate; Application - Packaging, Food Contact, Non-food Contact, Automotive, Construction, Textile, Industrial, and Consumer Goods) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/21/2017 -- The consumers in the global plastic recycling market lack brand loyalty due to the presence of a large number of players. This aspect has also stiffened the competition in the overall market, states Transparency Market Research. The leading player in the market is Plasgran Ltd., which offers a comprehensive collection of facility that enables smooth sorting and baling and separation and compounding operations. The other players in the market are expected to focus on expanding their businesses to emerging economies for capturing a wider geographical reach.

According to the research report, the global plastic recycling mark et has been valued at US$56.8 bn by 2024 as compared to US$31.5 bn in 2015. Between the forecast years of 2016 and 2024, the global market is expected to progress at a CAGR of 6.9%.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=9049

Asia Pacific to Remain Dominant as Consumption of Plastic Rises

On the basis of material, the global plastic recycling market has been segmented into PET, HDPE, PP, LDPE, PVC, PS, and others such as nylon, polycarbonate, and ABS. Of these, HDPE is expected to remain a dominant material segment during the forecast period. In terms of revenue, this segment is projected to expand at a CAGR of 7.4% between 2016 and 2024. The demand for HDPE is expected to remain high as it is extensively used in residential and packaging applications.

Geographically, the global plastic recycling market is segmented into North America, Europe, the Middle East and Africa, and Latin America. Regionally, Asia Pacific is anticipated to remain dominant in the global market as it is slated to acquire a share of 71.3% by the end of 2024. The increasing plastic consumption along with increasing pressure of eco-friendly disposal of plastic waste is expected to keep the regional market ahead of the pack.

Overflowing Landfills Increase Pressure on Governments for Recycling Plastic

The growing pressure of overflowing landfills has been the primary growth driver for the global plastic recycling market. This factor has proven to be an important driver for the plastic recycling market in developed regions such as Europe. The mounting plastic waste has triggered Herculean task of recycling plastic waste. Furthermore, the European Committee of Region's (CoR) support for the ban on all dumping plastics in landfills across the European 2020 has also won the market a special impetus.

The growing awareness about protecting the environment, hazardous impact of plastic wastes on landfills and animals, and need to reduce the carbon footprint has also fueled the global plastic recycling market. Owing to these reasons, solutions such as drop-off recycling, curbside recycling, buy-back centers, and deposit/refund centers are helping various organizations to channelize trash for recycling. The global market is also gaining momentum due to the cost-effectiveness of recycling plastic over manufacturing plastic. Production of plastic requires a large amount of crude oil, which has gotten expensive with each passing year, thus making the option of recycling existing plastic far cheaper.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=9049

Poor Collection Systems to Restrain Market Growth

Despite the benefits of plastic recycling, the global market for the same is being held back due to several reasons. To begin with, the poor system of collecting waste materials is the key restraint for the global market. "About 10% of the overall waste produced in Africa is funneled through the collection systems," states the lead author of this research report. The author further states that the remaining 90% goes unaccounted for resulting in addition to landfills or being dumped into oceans and river streams.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “2-shot Injection Molding Market (Product - Polypropylene, Polycarbonate, Acrylonitrile Butadiene Styrene (ABS), Polystyrene, Other Plastics (Nylon and PBT), Silicones, Styrene-Butadiene Rubber (SBR), Thermoplastic Elastomers (TPE), and Other Elastomers (Natural Rubber and Nitrile Rubber); Application - Medical, Automotive, Consumer Goods, Electrical & Electronics, Industrial, and Packaging) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/21/2017 -- The global 2-shot injection molding market has been prognosticated to demonstrate a vastly fragmented character. This could be on account of a substantial number of industry players operating in the market. A report prepared by Transparency Market Research (TMR) has envisaged a stiff competition to take shape in the market, owing to a small share held by each player.

By the end of 2024, the global 2-shot injection molding market could arrive at a valuation of around US$11.5 bn from US$6.6 bn in 2015, according to TMR. Between 2016 and 2024, the market could expand at a 6.5% CAGR. As per application analysis, the medical market for 2-shot injection molding has been envisioned to rise with an approximate 25.8% share by the concluding forecast year after having acquired a dominant share in 2015. Geographically, Europe could be at the helm of the market with a 33.9% share expected to be achieved by the same year.

Among top players, Gemini Group, Inc., Paragon Rapid Technologies Limited, Nyloncraft, Inc., and Rogan Corporation could secure a leading position in the global 2-shot injection molding market. As per the analysis of the report's lead author, players have been projected to take to improving their production volume for staying relevant in the market. Moreover, there could a high focus on shortening the lead time to showcase competitiveness.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=18512

Accurate Repeatability, Precise Production Using Single Tool Enhance Adoption

The production of remarkably precise parts could be ensured with the implementation of 2-shot injection molding warranting exact repeatability using merely a single tool. With this advantage in view, 2-shot injection molding could prove to be vital for encouraging original equipment manufacturers (OEMs) to design and develop an increasingly more count of products. As a result, there could be an augmenting adoption of the process across the world. The growth of the world 2-shot injection molding market has been forecasted to be boosted significantly on the back of another advantage, i.e. cost reduction. This could be achieved with execution of a single operation for producing two component parts.

Expensive Equipment Cost, Initial Investments Dampen Demand

One of the main impediments of growth in the international 2-shot injection molding market has been anticipated to be the exorbitant cost of tools and equipment in comparison with that of those used in conventional molding. Furthermore, manufacturers could be discouraged to adopt 2-shot injection molding in their production processes due to considerably extortionate initial investment costs. The restricted choices of material pairs that could be used for 2-shot injection molding have been predicted to stymie the market.

However, the analysts have expected some unswerving prospects to show face in the international 2-shot injection molding market. These could be in the form of rising government pressure to recycle plastics. OEMs could be encouraged to increase the adoption of 2-shot injection molding as tight government regulations compel industries to recycle materials. A chief advantage of implementing 2-shot injection molding is that the core of any two component parts could be derived from recycled plastic while doing away with any change in its property or appearance. In this regard, the elevating uptake of recycled plastic has been prophesied to bode well for the market.

Request For Report Table of Content (TOC):https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=18512

The information presented in this review is based on a TMR report, titled "2-shot Injection Molding Market (Product - Polypropylene, Polycarbonate, Acrylonitrile Butadiene Styrene (ABS), Polystyrene, Plastics (Nylon and PBT), Silicones, Styrene-Butadiene Rubber (SBR), Thermoplastic Elastomers (TPE), and Elastomers (Natural Rubber and Nitrile Rubber); Application - Medical, Automotive, Consumer Goods, Electrical and Electronics, Industrial, and Packaging) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “UV-cured Acrylic Adhesive Tapes Market (Product - Foamed Tapes and Non-foamed Tapes (Thermally Conductive Tapes, Flame Retardant Tapes and Universal Tapes); End User - Automotive, Building and Construction, Aerospace, and Electricals and Electronics) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/21/2017 -- The intense competition between 3M, Avery Dennison Corp., Henkel AG & Co. KgaA, tesa SE, and H.B. Fuller signifies the competitive landscape of the global UV-cured acrylic adhesive tapes market, finds a report by Transparency Market Research (TMR). These players together held a share on 80% in this market in 2015.

The rivalry between the leading players is expected to increase in the coming years. TMR recommends these companies to strengthen their distribution channels for their sustenance in the near future.

As per the research report, the global market for UV-cured acrylic adhesive tapes, which stood at US$0.37 bn in 2015, is projected to rise at a CAGR of 7.29% between 2016 and 2024 and reach a value of US$0.69 bn by the end of the forecast period. Researchers project the market to cross a shipment volume of 149.32 mn Sq. Mts. by the end of 2024. The demand for UV-cured acrylic adhesive tapes is greater from the automotive industry than other end users. With an estimated contribution of US$170.39 mn in revenue by 2024, this segment is likely to remain leading throughout the forecast period.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=18134

North America to Lose Ground to Asia Pacific

In this report, the worldwide market for UV-cured acrylic adhesive tapes has also been studied on the basis of its geographical presence. According to it, Asia Pacific, North America, Latin America, the Middle East and Africa, and Europe are the prominent regional markets for UV-cured acrylic adhesives tapes across the world. Driven by the high demand from the U.S. and Canada, owing to the presence of an advanced infrastructure, North America has surfaced as the key consumer of UV-cured acrylic adhesives tapes, globally.

Although the growth in the North America market for UV-cured acrylic adhesives tapes will remain strong over the forecast period, analysts expect it to lose ground to Asia Pacific on account of the substantial increase in the building and construction activities in emerging Asian economies. Exceeding North America, the market in Asia Pacific is likely to gain an amount of US$224.81 mn in revenues by 2024, states the research report.

Increasing Trend of Miniature Electronic Devices to Reflect Positively on Demand for UV-cured Acrylic Adhesive Tapes

"The rising the trend of miniaturization of electronic devices, such as portable personal computers, tablets, and cell phones, is having a considerable influence on the demand for UV-cured acrylic adhesive tapes across the world," says the author of this research study. The ongoing expansion in the electrical and electronic industry, thanks to the growing dependence of consumers on electronic devices, is also projected to boost the adoption of these tapes remarkably over the next few years.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=18134

In addition to this, the rise in the automotive industry, together with the increasing demand for light automobiles, will reflect greatly on the global market for UV-cured acrylic adhesive tapes over the forecast period. However, the volatility in the prices of raw materials and the high cost of advanced machinery may limit the adoption of these tapes to some extent in the near future, notes the study.

The study presented here is based on a report by Transparency Market Research (TMR) titled "UV-cured Acrylic Adhesive Tapes Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast, 2016 - 2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Butane Gas Cartridges Market (Applications - Medical, Pest Control and Fumigation, Stoves, Food and Beverages, Metal Working, and Plastic Industry) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/21/2017 -- Tae Yang Corporation and Aspire Industries were two highly prominent names in the global butane gas cartridges market for 2015, thanks to their strong grasp over key regions in terms of supplying their demand. Both companies own a wide array of products in the global butane gas cartridges market and are showing promising rates of expansions across the globe.

In its recent research report, Transparency Market Research points to an intense competitive profile for the global butane gas cartridges market. The market is very favorable to new entrants due to the ease with which inexpensive raw materials are available, and the low capital required to set up. This will compound the competition within the global butane gas cartridges market, further boosted by the growing rivalry from substitutes to butane gas cartridges. The global butane gas cartridges market was valued at US$364.55 mn at the end of 2015. By the end of 2016, this market's revenue is expected to reach US$380.30 mn and is projected to reach US$555.24 mn by 2024, after expanding at a CAGR of 4.73% from 2016 to 2024.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=17957

Gas Cartridges Winning Demand amid Need for Portable Fuel Storage Units

"The global stockpile of energy can potentially be used up faster than it can be generated. Industries are still highly dependent on conventional fuels and as a result, energy security becomes a paramount issue. The global butane gas cartridges market is currently in a position where it can provide an economical answer to the problem, thereby gaining a high volume of demand. Both industrial clients as well as individual consumers are ramping up their demand for gas capsules as they rank better in portability to other fuel transportation options. This is especially beneficial for individuals as it allows for the use of butane gas in rural or remote locations as well," states a TMR analyst.

The global butane gas cartridges market is also being driven by the greater efficiency of butane gas when compared to other liquid fuels that can be stored in capsules. Butane gas cartridges are much lighter in weight and provide a great fuel efficiency for their stored volume.

Shaky Crude Prices and Safety Issues Mar Butane Gas Cartridges Demand

One of the key restraints acting on the global butane gas cartridges market currently, is the volatility of crude oil supply and pricing. The global market for crude oil and natural gas has been in a shay state over the past decade owing to several issues such as the depletion of key stockpiles and the growing pressure on production by the extremely high consumption rate of fuel by all economies. If the current trend continues, so will the volatility in prices of butane gas cartridges across the world. Another issue with butane gas cartridges is their relatively lower level of safety in comparison to other fuel storage units. They can be sources of fire hazards if misused and are the cause of multiple home or office fires annually. Manufacturers are quick to respond to these safety flaws and add increasingly efficient safety mechanisms on the cartridges.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=17957

"A lot of manufacturers in the global butane gas cartridges market are taking one step backwards to cope with losses in the event of extreme pricing pressure. They are beginning to integrate the production of aerosol cans in order to tap their growing demand, thereby creating additional opportunities in a time where demand for butane cartridges is fickle," adds the analyst.

The information presented in this review is based on a Transparency Market Research report, titled, "Butane Gas Cartridges Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Commercial Roofing Materials Market (Building Type - Low Sloped Roofing and Steep Sloped Roofing; Materials - Single-ply Products, Modified Bitumen Materials, Spray Polyurethane Foam (SPF), Built-up Roofing (BUR), and Metals) - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/21/2017 -- The global commercial roofing materials market is defined by the presence of well known players from the construction industry. There are no prominent global players in this market but there are several regional players, Transparency Market Research observes in its latest study on this market. Some of them are: GAF, Firestone Building Products Company, and TAMKO Building Products, Inc. According to the report the global commercial roofing materials market was worth US$7.81 bn in 2016 and shall be worth US$10.38 bn in 2024, expanding at a 3.6% CAGR from 2016 to 2024.

On the basis of geography, North America has been leading in the commercial roofing materials market with a high demand for all segments of roofing. However, emerging economies are showing a positive growth rate owing to an increase in construction activities and this will make them lucrative markets for commercial roofing materials in the years to come, while North American market for the same has become mature and growth will be slower. The increased re-roofing activities are expected to be a key reason for attracting players in the industry to this region. "On the basis of building type, the low sloped roofing segment not only led in the past but shall continue to retain its position through 2024," said a TMR analyst. On the basis of type of materials, the market was led by modified bitumen materials in 2015.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=17882

Use of Single Ply Products Driving Growth Prospects of Commercial Roofing Materials

The growth of construction activities is one of the most obvious and key reasons for the growth of the global commercial roofing materials. Restoration and renovation activities will also generate a demand for commercial roofing materials. Developed economies are anticipated to witness more of these renovation activities. The growing use of single ply products for roofing systems as they are more flexible, easy to install, and are priced reasonably will also aid the growth of this market.

Additions such as Cool Roofing and Solar Panel to Increase Cost, Restricting Demand

On the other hand, the high installation cost will act as a challenge for the growth of commercial roofing materials market. In addition to this, the varying lifespan of different products will also be a cause of concern and restrict the growth of this market as customers will be confused over which commercial roofing type to opt for. Moreover, commercial roofing these days accommodate additions such as cool roofing and solar panel roofing as per customer demands and this is only increasing the price of these products, deterring their adoption in cost sensitive regions. However, advancements in technology may bring about a reduction in price and enable the continued growth of this market.

Request For Report Table of Content (TOC):https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=17882

The information presented in this review is based on a Transparency Market Research report, titled, "Commercial Roofing Materials Market (Building Type - Low Sloped Roofing and Steep Sloped Roofing; Materials - Single-ply Products, Modified Bitumen Materials, Spray Polyurethane Foam (SPF), Built-up Roofing (BUR), and Metals) - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2016 - 2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Energy Harvesting in Automotive Key Fob Application Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- Automotive key fobs are used to activate a vehicle's which operate on remote keyless system. Key fobs are a very popular in vehicle accessory as they are a secure and convenient and secure unlocking and locking of a vehicle. Key fobs are designed to remotely start the vehicle or open an auto's trunk. An energy harvesting system for use in vehicle included an RF transmitter position and a key fob having an antenna configured to receive an RF signal from the transmitter and convert the RF signal to electrical energy. A power management circuit configured to distribute the electrical energy in the key fob, and an energy storage device configured at least some of the electrical energy converted from the RF signal.

Energy harvesting in automotive key fob application is bifurcated by storage devices, by operating frequency and by region. By storage devices, it can be further segmented into capacitor, battery and super capacitor. Energy stored in capacitor are in electric field but in battery it is in chemical form. Battery uses chemical storage as greater capability for storing energy than capacitor which can be very useful for energy harvesting. Discharging Capability of battery compared to capacitor is very slowed in battery chemical is used, as chemical reaction required time to transfer chemical energy into electrical energy. Capacitor has long life, less charging time, excellent temperature performance however, batteries have large storage capability that is significant for energy harvesting in automotive key fob. The life cycle of battery cells is usually in range to one thousand to several thousand discharge and charge cycles depending on the type of battery and capacitor. By contrast, a super capacitor has an almost unlimited capability since no chemical and phase changes are involved in its charging and discharging.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=36332

By operating frequency, the market is divided into high frequency and low frequency. High frequency is in between 13.56MHz to 433 MHz (100 meter away) range whereas low frequency is in between 125 KHz to 134 KHz. Functions such opening the door, closing it and starting the vehicle, the passive entry and passive start vehicle (including the Low Frequency antennas) may also function in conjunction with the power management circuit. Particularly, the Low Frequency antenna in the key fob receives the Low Frequency signal transmitted by the Low Frequency antennas and converts the Low Frequency signal to an electrical current. The power management circuit receives the current from the Low Frequency antenna and controls the distribution of electrical energy to and from the energy storage device. Frequency range from 433.92MHz and of 220MHz to 420MHz are used in countries outside of the Europe. Moreover, the advancements in design & technology has facilitated the rise in demand for key fob in various applications that is expected to positively support the growth of overall automotive key fob ecosystem during the forecast period from 2017 to 2025. By region Energy harvesting in automotive key fob application market is studied according to regional bifurcations such as North America, Europe, Asia Pacific, Middle East & Africa and South America. Additionally, the flexible circuit manufacturing market are having highest growth rate in Asia Pacific and North America region. Europe and North America are considered to be the key facilitator for this market, however, the APAC region along with MEA will provide better opportunities for the automotive key fob suppliers

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=36332

The major players for energy harvesting in automotive key fob application market are JMA U.K, advanced RF Technologies (ADRF), SOLiD Technologies, Cobham Wireless, Bird/DeltaNode, Comba Telecom, Corning, Dali Wireless, Fiber-Span, CommScope, Kathrein, Westell, Zinwave and so on.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Automotive Smart Seating Systems Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- Technological innovations in automobile industry is continuously resulting into adding new features to the automobiles to reduce road accidents and increase driving safety. Increasing number of fast moving vehicles on the road and development of highways and expressways is driving the need for safety systems such as smart seating systems, lane departure warning system, among others. The appearance of next generation seating system, also known as the smart seating offers an expedient driving experience for the driver as well as passenger. These systems are devised to offer a comfort area while driving. It does so by the integration of a variety of factors including adaptive positioning, behavioral dynamics, and personalization requirements. The seat material is primarily made up of smart textiles which has the ability to measure various physiological characteristics including the breathing rate and heart rate and. smart seating systems are programmed to sense signs of exhaustion in the person (especially drivers) and alerts the driver promptly thereby preventing a huge number of road accidents each year.

The global automotive smart seating systems market is likely to experience a double digit growth during the forecast period. Over speeding and fatigue are one of the main causes for road fatalities. The use of smart seating systems curb unnecessary speed, and alerts the driver, thereby curtailing road accidents. The United Nations' Agenda for Sustainable Development set a target to decrease the number of injuries and deaths from road traffic by fifty percent by the year 2020. If automotive smart seating system is integrated with efficient ADAS systems including anti-collision systems, they will have the ability to curb road accidents by limiting vehicle speeds. This will, in turn, boost the growth of the smart seating systems market during 2016 to 2025.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=28727

According to a report published in the World Health Organization in 2016, Around 20-50 million people suffer from non-fatal injuries in road crashes in the world per year, and it has been proved that with the usage of the right safety systems, this number can be successfully brought down. Increasing road accidents along with growing awareness about road safety are likely to drive the growth of the global smart seating systems market. Furthermore, increasing demand for automobile and stringent regulatory policies in regard to road safety as well as obligatory use of warning system are anticipated to fuel the demand for smart seating systems in the coming years. Nonetheless, integration of smart seating systems may increase the overall cost of the vehicle. Hence, this may act as a restraining factor for the growth of the overall market.

The global automotive smart seating systems market can be segmented on the basis of end user and region. The market can be divided on the basis of end user into original equipment manufacturer (OEM) and aftermarket. The OEM segment is likely to constitute the major share of the global smart seating systems market. The global smart seating systems market can be segmented into five regions namely North America, Europe, Asia Pacific, Latin America, and Middle East and Africa. Europe is likely to account for the maximum share in the global automotive smart seating systems market. Stringent regulatory framework, rising demand for automobiles with advanced safety features such as smart seating systems, lane warning system, and power-assisted steering are some of the factors that are likely to boost the growth of the market in this region over the forecast period.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=28727

The global automotive smart seating systems market is categorized by the presence of a limited number of players as well as regional vendors. Regions such as Europe and North America consists of many players that operate globally and locally. Some of the major players operating in the global automotive smart seating systems market are Johnson Controls, Magna International, Faurecia, Lear, Continental, and DURA Automotive Systems.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “De-inking Agents Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- De-inking agents are specialty chemicals employed for removal of ink, coloring matter, and stains during recycling of paper. The primary function of de-inking agents is to reduce surface tension between pulp fiber and ink by forming froth that floats the ink off during the ink collection process. The pulp & paper industry is a highly sensitive industry and is primarily valued for its effective re-use of waste paper. De-inking agents have gained high importance in the recycled pulp & paper industry, which has permitted various manufacturers to produce products such as newspaper, writing paper, and toilet paper of almost the same quality as the new one.

Based on technology, the global de-inking agents market can be divided into wash de-inking and floatation de-inking. Demand for the floatation de-inking technology is expected to rise significantly during the forecast period, due to its benefits over wash de-inking technology. Floatation de-inking method offers better de-inking effect by recovering 20.0% more fibers. The flotation de-inking technology has currently been adopted as a standard practice for removing ink from waste paper in paper recycling operations. The floatation method aids in efficient removal of inks, dirt, and other contaminants from the recycled pulp. Based on de-inking process, the market can be segmented into chemical de-inking and ultrasonic de-inking. Chemical de-inking is carried out at elevated temperatures through alkaline re-pulping operations, whereas ultrasonic de-inking is carried out by utilizing ultrasound waves generated by conversion of energy. Demand for the ultrasonic de-inking process is expected to increase significantly during the forecast period, as it requires very low input of additional energy for increasing brightness of waste paper compared to chemical de-inking.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=33641

Based on chemical formulation, the de-inking agents market has been segmented into sodium hydroxide (caustic soda), sodium hydrosulfite, hydrogen peroxide, chelating agents, and surfactants. Caustic soda is a leading chemical used in de-inking formulations. It promotes de-fiberation in pulp and paper. Surfactants is also a prominent segment of the de-inking agents market.

Based on surfactant formulation, the de-inking agents market can be segregated into fatty acids, non-ionic detergents, higher alcohol derivatives, and fatty oil derivatives. Demand for fatty oil-based de-inking agents is expected to increase during the forecast period, as it effectively removes ink and stickiness and improves brightness of the recycled pulp.

Rising demand for recycled paper and increasing focus on reducing energy consumption are some of the key factors driving the market. De-inking processes are more eco-friendly than virgin-paper-making processes; however, they utilize certain chemicals that are harmful when released as effluents. This may hamper the market during the forecast period. Rise in environmental regulations imposed on chemical disposal are making manufacturers opt for eco-friendly products to manufacture de-inking agents. Enzymes such as cellulose, xylanase, laccase, and lipase are found to be an attractive alternative for chemicals in de-inking. Manufacturers are trying to increase usage of enzymes in de-inking from laboratory and pilot-plant scale levels to the industrial level.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=33641

Geographically, the global market for de-inking agents can be segmented into North America, Asia Pacific, Europe, Latin America, and Middle East & Africa. In terms of consumption, Asia Pacific is a highly lucrative market for de-inking agents due to high production of paper in the region. Increasing literacy rate, especially in emerging economies such as India, and rising demand for recycled paper with high printing quality and performance are expected to drive the de-inking agents market in Asia Pacific. In terms of consumption, demand for wash de-inking technology is high in the U.S. and Canada, whereas floatation de-inking is widely adopted in Asia Pacific and Europe. Extensive research in the de-inking technology is expected to create lucrative opportunities for manufacturers based in North America and Europe. Favorable activities of industrial production in developing countries such as Brazil and South Africa are fueling the market for de-inking agents in these countries.

Key players operating in the global de-inking agents market include Kao Chemicals, Kemira Oyj, Lion Specialty Chemicals Co., Ltd., and Oleon Corporate M&S.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Non-lethal Biochemical Weapons Market (Operation -Defensive, Offensive, and Genetic Attack; Product - Directed Energy and Direct Contact; End Use - Military Forces and Law Enforcement Agencies) - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- The global market for non-lethal biochemical is consolidated in nature. In 2015, two dominant companies, namely General Dynamics Corporation and Raytheon Companies, accounted for almost 57% share in the market. BAE systems followed in the third position. The market shares of the key companies are likely undergo considerable changes in the near future on account of the ever-changing competitive dynamics.

A report by Transparency Market Research uncovers that the global non-lethal biochemical weapons market will likely expand at a healthy CAGR of 8.0% CAGR during the period between 2016 and 2024. Rising at this rate, the market, which was worth US$1.17 bn in 2015 will likely become worth US$2.32 bn by 2024.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=20858

Two of the prominent end-use segments in the global non-lethal biochemical market are law-enforcement agencies and military forces. Among them, the military forces account for most of the demand and in 2015 held more than 82% of the overall market. In the years ahead too, the segment is expected to hold on to its leading share on the back of growing use of non-lethal biochemical weapons by military forces due to the pressing need for crowd control in emerging nations. Further, these weapons offer advanced methods to counter internal security challenges too.

Geographically, the key segments of the global market for non-lethal biochemical are Europe, Latin America, North America, Asia Pacific, and the Middle East and Africa. Of them, the Middle East and Africa bring about maximum demand and accounted for about 35% share in the market in 2015.

Rise in Cross-border Tensions Proving Beneficial for Market

Majorly fuelling the global market for non-lethal biochemical weapons is the increasing defense budget, worldwide, and the use of sophisticated weaponry to maintain law and order. This is mainly on account of the increased cross-border tension between nations these days. This has also egged companies to come up with innovative weapons that are more effective. As a result, demand for non-lethal biochemical weapons, which are technologically advanced, is soaring. As per the lead analyst of the TMR report, "Exceptional developments in biochemical studies have led to the innovation of non-lethal weapons offering unmatched efficiency." With producers pouring in money on product development to counter potential collateral impairment, the future of the market looks upbeat.

Increasing Role of Military in Peacekeeping Boosting Market as Well

Further, rise in the number of military tasks beyond non-combatant zones along with increasing role of military forces and law enforcement agencies in peacekeeping purposes such as disaster management, controlling civil unrests and riots, and countering insurgencies is having a positive influence on the market as well. Such activities are most prominent in countries of China, India, France, and the U.S. Political upheavals in countries of Brazil, Israel, Eygpt, and Ukraine also have had a positive impact on the market. This is because non-lethal biochemical weapons help in dispersing violent crowds sans physical harm or injury.

Request For Report Table of Content (TOC):https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=20858

Serving to hinder the global market for non-lethal biochemical weapons, on the other hand, is the strict regulations surrounding their use and opposition from human rights associations. The increasing number of injuries from the use of biochemical weapons is also hampering demand.

This review is based on the findings of a TMR report, titled, "Non-lethal Biochemical Weapons Market (Operation - Defensive, Offensive, and Genetic Attack; Product - Directed Energy and Direct Contact; End Use - Military Forces and Law Enforcement Agencies) - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2016–2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Polyetheretherketone (PEEK) Market (Application - Automotive, Industrial, Aerospace, Electrical & Electronics, and Medical) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- In 2015, Victrex plc held the dominant share of 66.3% in the global polyetheretherketone (PEEK) market. This defined the highly consolidated vendor landscape of the market. Solvay S.A., which emerged as the second lead in the same here was far behind occupying a little over 14% of the overall market. Among other companies making their presence felt in the overall polyetheretherketone market, Evonik Industries and Panjin Zhongrun High Performance Engineering Plastic Co., Ltd have a stronger foothold, finds Transparency Market Research (TMR) in a new report.

"On account of being technologically sensitive, the PEEK market caters to niche applications," observed the TMR report's author. This is one of the key reasons why the prime focus of producers is on constantly upgrading their product portfolios. Besides this, increasing production capacities and the development of novel products are a few strategies sought by the market players.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=2257

According to TMR, the global polyetheretherketone market, which was valued at US$451.5 mn in 2015, is expected to reach US$832.6 mn by the end of 2024. If the figures hold true, the global PEEK market will exhibit a CAGR of 7.1% between 2016 and 2024. Regionally, North America and Europe led the overall market in 2015 with a cumulative share of 60.5%. By application, the electrical and electronics segment held the dominant share of 27.6% in the market in 2015. The trend of miniaturizing electronic devices necessitates the use of plastic at a very high temperature. This is likely to drive PEEK usage in the sector.

Excellent Mechanical Properties of PEEK to Fuel its Demand

"In the last few years, the usage of PEEK has increased at a tremendous pace primarily due its exceptional mechanical properties," said a lead TMR analyst. PEEK has a much lower density than metals. Design engineers are thus increasingly using PEEK as a popular substitute for metals in diverse applications. For instance, compelled by stringent emission control norms automobile manufacturers are compelled to shift towards using lightweight materials. Spurred by this, the global polyetheretherketone market is forecast to exhibit strong growth during the course of the forecast period.

In addition, with the trend of miniaturizing electrical items gaining pace, the market is likely to witness lucrative growth opportunities. PEEK maintains its electrical performances even at high frequencies and possesses high strength at elevated temperatures. These mechanical properties make it ideal for use in the miniaturization of electrical components. Besides this, PEEK manufacturers are hoping to gain significantly from the rising use of PEEK in the medical industry. PEEK implants are bone-friendly and offer greater biocompatibility, which make them more convenient than metal implants.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=2257

High Cost of PEEK Grades Considered Major Restraint to Growth

On the downside, a large number of companies refrain from using a few grades of PEEK, which are priced higher than other high performance plastics. PEEK is often expensive due to the high cost of monomer and advanced technological requirements. This factor is restraining the market's trajectory to an extent. In addition, technological challenges in molding PEEK pose threat to the market. Stringent regulatory barriers on the use of PEEK across various application will also create bottlenecks for the global PEEK market, thereby adversely affecting its prospects for growth.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Automotive Lightweight Materials Market (Product - Plastics, Rubber, Composites, and Metal; Vehicle Type - Passenger Cars, Commercial Vehicles, and Heavy Trucks and Buses; Application - Interior, Exterior, Under Bonnet, and Structural) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- With the presence of a large pool of established automobile manufacturers, such as Tata, BMW, Audi, General Motors, and Ford, the worldwide market for automotive lightweight materials demonstrates a highly competitive landscape in Asia Pacific, Europe, and North America, finds a new research report by Transparency Market Research (TMR). Currently, the market is led by multinational automakers with a robust regional presence. The high potential of this market points towards an intensified rivalry between players in the years to come.

According to TMR's estimation, the global automotive lightweight materials market offered an opportunity worth US$149.03 bn in 2015. Rising at a CAGR of 8.30% during the period from 2016 to 2024, the total valuation of this market is likely to cross US$301.36 bn by the end of the forecast period. Metals have been the most valued product in this market and are projected to remain so over the next few years.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=8509

With Burgeoning Automotive Industry, North America to Retain its Lead

The report also studies the worldwide market for automotive lightweight materials on the basis of its geographical presence. As per the study, the global market is spread across North America, Europe, the Middle East and Africa, Latin America, and Asia Pacific. In 2015, North America emerged as the leading geographical segment in this market with a share of more than 30%. The regional market is expected to retain its position over the forecast period, thanks to the significant growth in the North American automotive industry. The continual advancements in technology, robust manufacturing base, and the presence of a large pool of automobile manufacturers are also projected to boost the North America market for automotive lightweight materials in the years to come.

Europe, which stood second in the global automotive lightweight materials market in 2015, is anticipated to remain seated in this position over the forthcoming years. The alarming rise in carbon emission from automobiles, especially in Spain, and the proposed Euro VI regulations to reduce this emission are likely to propel the Europe automotive lightweight materials market substantially in the near future. However, the Asia Pacific market is predicted to exhibit a greater cumulative average growth rate over the forecast period, owing to the rising trend of owning a vehicle, fueled by changing lifestyle and the increasing disposable income of consumers, states the research report.

Stringent Regulations Compel Automakers to Reinvent Products using Automotive Lightweight Materials

"The global market for automotive lightweight materials has gained substantial impetus from the enforcement of various government regulations intended to curb carbon emission from automobiles," says a TMR analyst. Owing to these regulations, automobile manufacturers are now focusing aggressively on reinventing their products through downsizing engines, electric power steering and hollow seat frames, which require lightweight materials. As a result, the demand for these materials has increased remarkably, having a great impact on this market.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=8509

The expansion in the automotive industry in emerging economies is also reflecting positively on the sales of automotive lightweight materials, implying a thriving future for this market. However, the high cost of these materials may limit their uptake, hampering the growth of this market in the near future, states the research study.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Future Market Insights has announced the addition of the “Automatic Tire Inflation System Market: Global Industry Analysis and Opportunity Assessment 2017-2027" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- Automatic tire inflation system is made up of a technology that is installed in the tires to manage the air pressure in each tire. It controls and guides the air pressure while the car is moving. A new research report by Future Market Insights presents an overview of the global automatic tire inflation system market with all the necessary data and market information that is a result of meticulous research. The report titled 'Automatic Tire Inflation System Market: Global Industry Analysis 2012–2016 and Opportunity Assessment 2017–2027' includes the current scenario of the global automatic tire inflation system market, forecast for the projected period, drivers impacting the market's revenue growth, restraints limiting the market and opportunities available to the existing players as well as new entrants in the market.

According to the forecast by Future Market Insights, the global automatic tire inflation system market is anticipated to project a revenue of over US$ 1,500 Mn in 2017 and grow at a steady CAGR of 5.6% during the 10 year period 2017-2027. The forecast predicts the market to reach a revenue of over US$ 2,700 Mn by the end of the forecast period in 2027.

Request Report Sample@ https://www.futuremarketinsights.com/reports/sample/rep-gb-2733

Global Automatic Tire Inflation System Market: Dynamics

The growth of the global automatic tire inflation system market is contributed the most by an increase in the production and sales of military vehicles. Other major drivers positively impacting market revenue growth include a spur in the use of trucks and trailers that require automatic tire inflation systems. The growth in the global automatic tire inflation system market is also the result of a growing inclination towards installation of automatic tire inflation systems in new vehicles.

However, the growth of the global automatic tire inflation systems market is hindered by a few factors. These restraints include passive or slow adoption of the technology in the global market, drop in military expenditure, and high maintenance costs of the system.

Global Automatic Tire Inflation System Market: Segmental Highlights

This comprehensive research report has segmented the global automatic tire inflation system market into various segments on the basis of vehicle type, sales channel and region.

The research exhibits some key takeaways from the forecast for different segments that are as follows:

In the vehicle type segment, the utility vehicles are expected to stay the dominating type in the global market. The segment is expected to grow at a CAGR of 5.5% during the projected period. The tractors segment is expected to reach a market revenue of a little under US$ 420 Mn by the end of 2017 and is anticipated to exceed US$ 720 Mn by the end of 2027, growing at a CAGR of 5.6%.

Based on sales channel, the OEM systems segment is expected to remain dominant in the global market, with revenue anticipated to cross US$ 750 Mn by the end of 2017, growing at a CAGR of 5.5% to reach a market value of around US$ 1,280 Mn by the end of 2027.

Among the regional markets, Western Europe is projected to show the maximum potential with an expected revenue of over US$ 920 Mn by the end of 2027. North America is expected to be the second largest market with projected revenue to the tune of about US$ 633 Mn by the end of 2027.

Visit For TOC@ https://www.futuremarketinsights.com/askus/rep-gb-2733

Global Automatic Tire Inflation System Market: Competitive Landscape

The research report consists of brief profiles of many key players in the global automatic tire inflation system market. Some of these major players are EnPro Industries, Inc., Nexter Group, Servitech Industries, Inc., Hendrickson USA, L.L.C., Tire Pressure Control International Ltd., PTG Reifendruckregelsysteme GmbH, Aperia Technologies, Inc., ti.systems GmbH, Bigfoot Equipment Ltd., Tibus Offload Ltd. & Co. KG, AIR CTI, FTL Technology Limited, and Col-Ven S.A.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Future Market Insights has announced the addition of the “Environment Testing, Inspection, and Certification Market: Global Industry Analysis and Opportunity Assessment 2017-2026" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- Growing need to ensure compliance to the product quality and safety has led to an upsurge in demand for environment inspection, testing, and certification services. In addition, rising instances of counterfeiting and piracy activities is projected to impact the global market growth of environment testing, inspection, and certification positively. Future Market Insights states that the global market environment testing, inspection, and certification is projected to reflect a healthy CAGR over the forecast period, 2017-2026.

Factors Fuelling Growth of the Global Market

Growth of the global environment testing, inspection, and certification market is mainly bound by various macro-economic and micro-economic factors. With the growing need to ensure product compliance with the stringent standards and regulations set up by the government, demand for the environmental testing, inspection and certification services continue to rev up in the global market. Moreover, surge in consumption of various goods particularly in the developing countries has further contributed towards the global market growth of environment testing, inspection, and certification.

Leading companies in the global market are focusing on outsourcing services for testing, certification and inspection of the product. With the increasing imposition of the stringent regulations by the government, conducting internal test continues to remain comparatively costly. Services for inspection, testing, and certification services continue to witness a surge in demand among third-party retailers for various applications inclusive of consumer goods and manufacturing.

Request Report Sample@ https://www.futuremarketinsights.com/reports/sample/rep-gb-5602

Before offering various products for imports, manufacturers and the organizations need to ensure that the products comply with international regulations and standards. With the increasing number of imports from the developing countries, demand for the inspection, testing and certification services continue to increase. Increasing launch of various products that have a comparatively short life is further likely to rev up sales of the testing and inspecting services. As demand to maintain the safety and reliability for the passengers and assets in the defense, marine, automotive, rail and aerospace continues to increase, the global market growth of environment testing, inspection, and certification is projected to gain significant momentum.

On the other hand, surge in the product recalls attributed to the faulty parts and components continue is likely to restrain the global market growth of environment testing, inspection, and certification. Growing need to comply with the strict regulations imposed by the government is further expected to increase the prices, which is projected to impact growth of the global market adversely. Furthermore, imposition of the government regulations against growing use of the asbestos continues to restrain the global market growth of environment testing, inspection, and certification. Lack of certification, inspection, and testing process will continue to result into no documentation regarding construction, poor workmanship, increasing construction costs and methods.

Sales through Testing Products Remain High

Growing need for premium quality and safe products has led to an upsurge in demand for testing the products among the organizations and manufacturers globally. Based on product type, the testing segment is projected to witness significant revenue growth, representing more than US$ 1,000 Mn by 2017-end. In contrast, the certification product type segment is projected to register a robust CAGR throughout 2026. On the basis of end user, the agriculture industry segment is projected to represent the highest revenue growth, accounting more than US$ 1,000 Mn by 2026-end. However, the industrial product manufacturer product type segment is projected to reflect a healthy CAGR over the forecast period.

By test type, the toxins segment is projected to generate significant revenues, representing for more than US$ 800 Mn by 2026-end. In contrary to this, the physical properties test type segment is projected to reflect a healthy CAGR in the global market through 2026. During the forecast period, the water testing sample type segment is projected to represent the highest revenue growth, recording more than US$ 600 Mn by 2017-end. In contrast, the waste testing sample type segment is projected to reflect a strong CAGR throughout the forecast period.

Visit For TOC@ https://www.futuremarketinsights.com/askus/rep-gb-5602

Market Players

Major players operating in the global market of environment testing, inspection, and certification market are Intertek Group, SGS SA, Yara International ASA, Bureau Veritas, Assure Quality, ALS Ltd, SCS Global, Exova Group, APAL Agriculture, RJ Hills Laboratories, Eurofins Scientific, TUV Nord AG, Danaher, GE Healthcare and Life sciences, SAI Global Limited, Agrolab Group, HRL Holdings Ltd, Cawood Scientific, SESL Australia and EnviroLab.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Future Market Insights has announced the addition of the “Polymeric Adsorbents Market: Global Industry Analysis 2012 - 2016 and Opportunity Assessment; 2017 - 2027" report to their offering.

Albany, NY -- (SBWIRE) -- 12/20/2017 -- Polymeric Adsorbents Market: Introduction

A significant advancement in adsorbent and ion exchange resin technology has led to the development of macro reticular pore structure. Polymeric adsorbents are synthetic materials which help to adsorb/desorb a wide range of compounds. Polymeric adsorbents and ion exchange resins of high pore volume and surface area are prepared through the development of synthetic rotes. Furthermore, synthesis have been developed to the degree that can vary pore and surface area parameters with the commercial availability of these macro reticular polymers based upon acrylate and cross-linked styrene parameters. Moreover, polymeric adsorbents are available in a variety of polarities owing to its characteristics such as durability, insoluble spheres of porosity & surface area and hardness. The polar and nonpolar nature of polymeric adsorbents helps during the treatment of effluent and phenolic wastes to recover significant quantities of re-usable chemicals that pay more for waste treatment. Other related applications include the removal of TNT residues, chlorinated pesticides, and other noxious compounds water supplies and waste effluents.

Polymeric Adsorbents Market: Dynamics

The polymeric adsorbents market is estimated to register significant growth during the forecast period owing to its excellent thermal & physical stability, ability to adsorb polar compounds from non-polar solvents and non-polar compounds from aqueous systems. Furthermore, desirable adsorption/desorption characteristics such as their unique structure, minimal shrinkage, and uniform rigid structure due to polyaromatic cross-linked materials are further expected to enhance the growth of the global polymeric adsorbents market during the forecast period. Polymeric adsorbents are further expected to witness substantial growth due to its usage in applications such as recovery of plant extracts, enzyme immobilization, removal of relatively polar or nonpolar compounds from non-aqueous solvents or polar solvents, and removal of organic pollutants from vapor streams, ground water, and aqueous wastes. Moreover, polymeric adsorbents help to qualify the stringent limits of free salts and metals, and are used in columns with repeated regeneration and exhaustion cycles in both down and up-flow operations, which is expected to further enhance the global polymeric adsorbents market. High purity, precise technical characteristics, tailored offerings for customer-specific requirements, and easy elution/desorption are some of the other factors driving the growth of the polymeric adsorbents market over the forecast period.

Request Report Sample@ https://www.futuremarketinsights.com/reports/sample/rep-gb-5760

With changing adsorption properties, the mass transfer zone probably increases which may pose challenge to both adsorption process simulation and design and may not be suitable for high adsorption capacity due to waste disposal limit and radiation safety concern.

Polymeric Adsorbents Market: Segmentation

The global polymeric adsorbents market can be segmented based on type, application and end-use.

By type, the global polymeric adsorbents market is segmented into:

Aromatic
Modified Aromatic
Methacrylic
By application, the global polymeric adsorbents market is segmented into:

Chlorinated solvents removal
Heterocyclic amines removal
Purification of alkanoalmines
Sugar decolorization
Anthocyanin removal
Others (fatty acid adsorption, surfactant removal, etc.)
By end use, the global polymeric adsorbents market is segmented into:

Pharmaceutical
Wastewater Treatment
Food & Beverage
Polymeric Adsorbents Market: Regional Outlook

North America is estimated to dominate the global polymeric adsorbents market owing to robust use of highly efficient adsorbents in the pharmaceutical and food & beverage industries in the U.S. Likewise, the demand from the wastewater and food & beverage industries in Canada has led North America to register relatively steady growth during the forecast period. Europe is estimated to witness relatively robust growth due to increasing demand from the food & beverage industry, which accounts major share in manufacturing value added in France, the U.K. and Spain. Asia Pacific is expected to register substantial growth during the forecast period owing to strong demand for extraction of gold, chemical and sugar purification in pharmaceutical and food & beverage industry during the forecast period.

Visit For TOC@ https://www.futuremarketinsights.com/toc/rep-gb-5760

Polymeric Adsorbents Market: Key Participants

Examples of some of the key participants in the global polymeric adsorbents market are:

The Dow Chemical Company
Purolite Corporation
Sunresin New Materials Co.Ltd.
SHANDONG YADA NEW MATERIAL CO., LTD,
Mitsubishi Chemical Corporation
Shanghai Bairy Technology Co., Ltd
Ajinomoto Fine-Techno Co.,Inc.
Thermax
CHEMRA COMPANY
Minerals Technologies Inc.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Lubricant Market Opportunity Analysis by Independent Manufacturers (Type - Mineral Lubricants, Synthetic Lubricants, and Bio-based Lubricants; Application - Automotive, Aerospace, Marine, and Industrial) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/19/2017 -- The global independent lubricant manufacturers market features a consolidated vendor landscape, wherein leading four companies collectively held almost 58% market share in 2016, as per a recent report by Transparency Market Research (TMR). Of them, Germany-based FUCHS alone contributed nearly 37% revenue generated in the overall market for independent lubricant manufacturers in 2016, pointing towards the stronghold of the company in the global market.

Despite the stronghold of top vendors, the presence of a large number of small players stiffens competition in the global independent lubricant manufacturers market. Product pricing, innovative product offerings, and distribution channels are the key aspects that based on which companies in this market compete to garner larger market share. The emergence of bio-based lubricants and the vast growth opportunities on account of demand for these products is expected to intensify competition in the market.

Furthermore, penetration into high-growth emerging economies and development of environmentally sustainable products could be the most rewarding strategies for companies contending to establish their presence in the global independent lubricant manufacturers market.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=1742

TMR estimates that the global independent manufacturers market will reach a valuation of US$9,454.04 mn by the end of 2025 increasing from US$6,800.79 mn in 2016, at a CAGR of 3.80% between 2017 and 2025. In 2016, the mineral lubricants product segment led the market holding a massive 60.8% share. However, the segment is expected to witness a nominal decline over the forecast period, on account of a notable rise of the synthetic lubricants product segment.

On the basis of geography, in 2016, Asia Pacific led the global independent lubricant manufacturers market in terms of revenue share, followed by North America.

Growth of Automotive Industry Catapults Demand for Lubricants

Some of the key factors driving growth of the global independent lubricant manufacturers market is the healthy growth of the automotive industry and immense demand for bio-based lubricants. The significant expansion of the automotive industry, which is one of the key end users of lubricants, predominantly in emerging economies due to a rapidly growing middle-class population and strengthening financial conditions is majorly fuelling the market's growth.

The implementation of environment protection regulations across key regional markets has led to a massive demand for high-quality lubricants. With these regulations expected to remain in place in the forthcoming years, the trend is anticipated to have an immense positive impact on the growth of independent lubricant manufacturers market. Furthermore, environment protection stipulations is also expected to witness demand for bio-based lubricants, thereby presenting growth opportunities for independent lubricant manufacturers that offer bio-based products.

Fluctuating Feedstock Prices Impacting Profit Margins Favor Use of Low Cost Alternatives in Cost Sensitive Regions

On the flip side, however, fluctuating raw material prices is posing as a deterrent to the growth of independent lubricant manufacturers market. This is because fluctuations in feedstock prices inevitably affect pricing models and mostly lead to declined profit margins. Price related fluctuations mostly impact cost-sensitive regional markets, wherein consumers easily shift to cheaper alternatives.

Request For Report Table of Content (TOC):https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=1742

Despite the palpable environment benefits of bio-based lubricants, their high costs is preventing consumers from buying these products and instead opt for conventional crude-oil based lubricants.

The review presented here is based on the findings of a report by Transparency Market Research, titled "Independent Lubricant Manufacturers Market (Type - Mineral Lubricants, Synthetic Lubricants, and Bio-based Lubricants; Application - Automotive, Aerospace, Marine, and Industrial) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2017 – 2025."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Automotive Filters Market (Filter Type - Air Filters, Fuel Filters, Hydraulic Filters, and Oil Filters; Vehicle Type - Passenger Vehicles and Commercial Vehicles; End Use - OEMs and Aftermarket) - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/19/2017 -- Transparency Market Research (TMR) observes that competitive landscape in the global automotive filters market is mildly fragmented. As of 2016, the leading players held a share of about 64% in the global market. This cream of the crop included, K & N Engineering, A.I Filter, Mahle GmbH, and MANN+HUMMEL Gmbh. To stay ahead of the competition, these players are expected to focus on research and development activities in the coming years. Collaborations with local players will also be seen as an emerging trend in the global market as these players will work towards expanding their geographical reach.

According to the research report, the global automotive filters market is estimated to be worth US$10.97 bn by the end of 2025 from US$5.40 bn in 2016. During the forecast years of 2017 and 2025, the global market is estimated to progress at a CAGR of 12.4%. Out of the various types of filters, the fuel filters are expected to expand at a significant CAGR of 9.2% over the forecast period. In terms of geography, the Asia Pacific automotive filters market is projected to rise at a CAGR of 9.0% in the global market.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=23384

Increasing Production of Automobiles Bolsters Growth of Global Market

The increasing incomes and growing expenditure on vehicles has led to stringent vehicular emission regulations as governments across the globe are vying to curb emissions, while keeping the economy healthy. Thus, the growing number of automobile manufacturers have increased the uptake of their filters in order to comply with the emission standards that quantify the limits on permissible amount of air pollutants. The growing environmental concerns due to emission of greenhouse gases has resulted in soaring demand for automotive filters. Furthermore, the compulsion to adhere to these norms in order to acquire manufacturing and sale licenses have also had a positive influence on the global market.

The global automotive filters market is also likely to benefit from the soaring automobile production across the world. The booming automotive manufacturing in the developing countries of Asia Pacific and Brazil are expected to be instrumental in shaping the trajectory of the global automotive filters market. Additionally, the highly replacement rate of filters due to their subsequent wear and tear is also anticipated to be an important driver for the global market. Automotive filters undergo weathering due to terrains and usage, which requires them to be replaced. Furthermore, the depleting value of vehicles also demands new automotive filters for regular maintenance of the vehicle. Introduction of new and better filters with advanced technologies has also led to a strong demand in the global market.

Shifting Inclination toward Electric Vehicles Dampens Market Spirit

On the flip side, the global automotive filters market is being threatened by a few factors. The research report identifies introduction of electric vehicles as an important factor that is poised to restrain the growth of the global automotive filters market. Analysts state that longer-range models, drop in battery prices, and increasing number of charging points have collectively led to higher sales of electric vehicles. The fact that these vehicles do not require filters is anticipated to dampen the spirits of the global market. Furthermore, the increasing pace of green revolution is also expected to have augment the uptake of electric vehicles, which will further add to the woes of the global automotive filters market.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=23384

This review is based on Transparency Market Research's report, titled "Automotive Filters Market (Filter Type - Air Filters, Fuel Filters, Hydraulic Filters, and Oil Filters; Vehicle Type - Passenger Vehicles and Commercial Vehicles; End Use - OEMs and Aftermarket) - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2017 - 2025."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Automotive Millimeter Wave Compatible Emblems Market- Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/19/2017 -- Automotive Millimeter Wave Compatible Emblems: Market Overview

The global scenario for the road fatalities is high causing the increase in the death count. This is the primary reason for the automakers to focus on minimizing road accidents. This causes the emergence of radar based technologies in the vehicles that can alert, inform or detect the accident causing elements on the road including nearby vehicles and pedestrians. Millimeter wave radar is one of the crucial element used in various vehicles to detect and avoid the vehicle collisions. The emblems that are the metal symbol over the front and rear side of the vehicle are used as a millimeter wave compatible device to detect what is around the car. In developed regions such as North America and Europe, passive car safety systems such as seat belts, sensors, airbags, are proven useful in decreasing the fatalities and serious injuries to driver as well as the pedestrians. Compared to other detectors, the millimeter wave compatible emblems are shown itself to be effective as it is unaffected by the rain, fog, or any external conditions. The Millimeter wave radar installed at both extreme emblems of the car that alert the driver, apply brakes, and prevent collisions. Moreover, the system maintains the distance between vehicles and operates at all speed. Considering all the above-said features, the global automotive millimeter wave compatible emblems market is projected to gain traction in the forecast period.

Automotive Millimeter wave compatible emblems: Market Drivers and Restraints

The global demand for the automotive millimeter wave compatible emblems market is driven by the automotive industry. The factors that favor the demand generation of the millimeter wave compatible emblems market includes improved automated system and government regulations enforcing the manufacturers to focus on the driving safety. Various radar technologies including millimeter wave improve the functionality of the system and thus prevents the accidents. Moreover, the advanced features such as rain, fog resistance, result orientation, and assurance of minimizing the damages in the vehicles propels the growth of global millimeter wave compatible emblems during the forecast period. Also, the macroeconomic factors such as government regulations regarding the enablement of safety features to the vehicles, growing customers demand for the technologically advanced vehicles, and reduction in the number of fatal injuries after the installation fuels the growth of the global millimeter wave compatible emblems market. Also, increased per capita income of the customers and need for the safety, triggers the demand for the market during the forecast period. However, the cost of the vehicles enabled with the technological investment, technical reliability of the driver making him to rely on it, and need for line of sight as well as feasibility of the system in the busy traffic are considered to be the major factors affecting the demand for the millimeter wave compatible emblems market during the forecast period.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=31895

Automotive Millimeter wave compatible emblems: Segmentation

Based on the range, the global automotive millimeter wave compatible emblems market is segmented into the following:

Long Range
Medium Range
Short Range

Based on the position, the global automotive millimeter wave compatible emblems market is segmented into the following:

Front
Front Side
Rear

Based on the vehicles, the global automotive millimeter wave compatible emblems market is segmented into the following:

Cars
Commercial Vehicles
Passenger Cars
Others

Automotive Millimeter wave compatible emblems: Regional Overview

Geographically, the global automotive millimeter wave compatible emblems market is segmented into seven regions Western Europe, Eastern Europe, Asia Pacific, Japan, North America, Latin America and the Middle East and Africa. The North America dominates the global millimeter wave compatible emblems market owing to technological advancement, adoption of latest technologies, and increased number of fatal road accidents. Also, the region is expected to grow with significant CAGR during the year 2017-2027 owing to increase in demand for the driving safety components. Western Europe is one of the prominent market for the automotive millimeter wave compatible emblems due to increased reliance on technology, increased sales for the premium vehicles, and concern about the safety while driving. Asia Pacific considering its rapid industrialization, increase in the vehicle sales and adoption of advanced vehicles fuels the growth of the automotive millimeter wave compatible emblems market and is expected to be the potential market for the car millimeter wave compatible emblems. Moreover, various manufacturers and investors get attracted towards the developing countries such as India, China for the market penetration. This creates the demand and is expected to propel the market in the forecast period.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=31895

Automotive Millimeter wave compatible emblems: Market Players

The prominent players in the global automotive millimeter wave compatible emblems market include Toyota Motor Corporation, Shinko Nameplate Co., Ltd., TOYODA GOSEI Co., Ltd., Fujitsu Ten Limited.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Automotive Sheet Metal Components Market (Material - Steel and Aluminum; Application - Interior, Drivetrain, Engine, Exterior, and Chassis) - Global Industry Analysis, Market Size, Share, Growth, Trends, and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/19/2017 -- The global market for automotive sheet metal components has a largely fragmented competitive landscape featuring a large number of small and large players and the leading four players collectively accounting for a nearly 40% of the overall market in 2016, observes Transparency Market Research (TMR) in a recent report. Although the market features low entry barriers for new companies, setting up of manufacturing units for automotive sheet metal components require huge capital and resource, thus limiting the scope of growth of new vendors.

Product innovation and development are key strategies adopted by most leading market players. New product innovation is an important strategy to combat the stiff competition in the market. Companies are focusing more on research and development activities to create innovative products to capture and maintain larger market share globally. Focus on expansion across emerging economies with a huge and rising appetite for high-end and passenger vehicles has also significantly increased.

Transparency Market Research states that the global automotive sheet metal components market will exhibit a moderate 3.7% CAGR from 2017 to 2025, rising from a valuation of US$104.30 bn in 2016 to US$142.41 bn in 2025.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=21887

In terms of material, steel contributed nearly 60% to the overall revenue accumulated by the global automotive sheet metal components in 2016 and is expected to remain the most preferred metal over the forecast period as well. In terms of geography, the global automotive sheet metal components market is presently led by the Asia Pacific market. China, one of the largest manufacturer of sheet metal components globally and one of the leading consumers of passenger vehicles, is expected to continue to drive the Asia Pacific market over the next few years, helping the regional market retain its top spot in the global market over the forecast period.

Rising Production of Vehicles Globally to Drive Market

In the past few years, there has been a vast rise in the production of vehicles across the globe owing to the rising demand and usage of passenger vehicles. This, coupled with the rising demand for lightweight vehicles, is driving the demand and growth of sheet metal components used in the production of automobiles. A small percentage of hybrid and electric vehicles are already available in the market and the percentage is expected to grow at a healthy pace in the coming years owing to their least impact on the environment in the form of emission of pollutants.

With the rise in the number of hybrid and electric vehicles in the automobile market, the application and market for sheet metal components in such vehicles is also expected to flourish in the near future. Moreover, the strengthening trend of engine downsizing of automobiles is expected to influence the growth of the automotive sheet metal components market globally.

Fluctuating Prices of Steel and Aluminum to Hinder Growth Prospects

As steel and aluminum are the two most used materials used for the manufacturing of automotive sheet metal components so their availability and fluctuation in prices make a huge impact on the overall market of automotive sheet metal components. China is the presently the leading producer of aluminum and steel globally. However, the country has been curbing its production of these metals to curb the level of air and water pollution.

This has been creating a huge gap between the supply and demand of aluminum and steel across the world. Moreover, concerns relating to the volatility in prices of aluminum and steel have also increased globally. Therefore, availability and volatility in the pricing of aluminum and steel are expected to inhibit the global automotive sheet metal components market, where the two materials find immense application.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=21887

This review of the global automotive sheet metal components market is based on a recent market research report published by Transparency Market Research, titled "Automotive Sheet Metal Components Market (Material - Steel and Aluminum; Application - Interior, Drivetrain, Engine, Exterior, and Chassis) - Global Industry Analysis, Market Size, Share, Growth, Trends, and Forecast 2017 - 2025."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Stormwater Treatment Systems Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/19/2017 -- Global Stormwater Treatment Systems Market: Overview

Stormwater originates during ice melts and precipitation events. It can run off or be held on the surface eventually getting evaporated or soak into the soil (called infiltration). Stormwater treatment means the removal of toxins and pollutants from the water. Running stormwater is a major source of pollution. The increased flow of stormwater can encourage weed incursion, stream erosion and also impact natural flow regimes. In certain developed areas, the polluted water runoff from roads which is again accelerated by storm water, can be a cause of water pollution when this water joins the main water bodies like lakes and oceans, which will have adverse effects on the flora and fauna and also on the lives of human beings living near the water bodies. Studies show that main reason for water pollution is especially due to growing industrialisation. Chemical companies release harmful chemicals in liquid as well as gaseous form. When these gases mix with stormwater, they get carried away and join the polluted running water which contaminates other water bodies. Another stormwater effect is urban flooding. In the U.S it is found very often that homes are not purchased on account of house degradation due to urban floods. Hence stormwater management is essential and its treatment is one of the main aspects that needs to be considered. This triggers the need for efficient stormwater treatment techniques.

A number of treating systems are available but each system has its own pros and cons and therefore it is obligatory to use the technique/system as per the ingredients of the polluted water such as the pollutant present in large quantities, the landscape which is experiencing the runoff and other local site characteristics such as regulations and permissions. Generally, three stages are established in stormwater treatment namely, the primary stage (basic level that removes gross pollutants and helps in superficial cleaning), the secondary stage (removes and sediments fine particles and the attached pollutants) and the tertiary stage (removes ultrafine and colloidal particulates, heavy metals and other dissolved nutrients). Stormwater treatment systems such as sand filters, hydrodynamic separators, gross pollutant traps, sediment basins, litter baskets, grass swales, infiltration and bio-infiltration systems, trash racks, net guards and slit arrestors find their applications in:

Stormwater detention
Water quality protection
Stormwater infiltration
Oil spill control

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=32792

Industrial stormwater (filtration for industrial sites, stormwater treatment on sites using hydrodynamic separators, oil and water separation techniques and rail collector pans for oil collection)
Green infrastructure (bio retention pre-treatment, bio retention and subsurface infiltration, bio filtration and rain water harvesting)

The global stormwater treatment systems market is anticipated to experience a steady growth in the forecasted period, owing to the rise of modern techniques, government aids and easy handling of machinery, which have facilitated the use of stormwater treatment systems worldwide proliferating the global market.

Global Stormwater Treatment Systems Market: Growth Propellers

Continuous water runoffs not only erode the soil but also reduce the life value of structures, contributing to water pollution and eventually creating a threat to human living. An awareness of the dynamic nature of the environment and its effects have prompted scientists to come up with solutions to treat and filter stormwater. This has accelerated the adoption of stormwater treatment systems thereby impacting the global market. Moreover, this adoption can be backed up by the fact that no "one" measure is always able to remove all the pollutants from the water and hence a "fit-for-purpose" treatment approach should be adopted, which is possible with the help of stormwater treatment systems and their improvisation. This has had an impact on the global market and is likely to have a continued influence owing to the developments in science and technology. Emergence of the concept of sustainable water treatment techniques have propelled the growth of the global stormwater treatment systems market. Industrial and economic development along with speedy urbanisation especially in emerging countries is encouraging the need for efficient stormwater treatment solutions and systems, thereby contributing to the growth of the global stormwater treatment systems market. The rising demand for water disinfection coupled with growing technological advancements such as UV disinfection is also impacting the global market.

Global Stormwater Treatment Systems Market: Growth Suppressors

The major aspect restraining market growth is the cost factor involved in the installation of stormwater treatment systems and their maintenance. Also, underdeveloped regions face problems in adoption of the technology.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=32792

Global Stormwater Treatment Systems Market: Key Regions

The U.S market is expected to show better growth opportunities in the global stormwater treatment systems market owing to technological developments and better funding. Eastern Europe is also set for good growth.

Global Stormwater Treatment Systems Market: Key Market Players

Few of the key market players in the global stormwater treatment systems market are Stormwater Treatment Systems, Contech Engineered Solutions, Bio-Microbics, Ecosol, AcquaMaster, AS Filtration and Stormtreat.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Polyethylene Terephthalate Market (Beverages (Bottled Water, Carbonated Drinks, Juices, and LDP), Films, Food Packaging, Cosmetic Bottles, and Household Products) - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/18/2017 -- The global polyethylene terephthalate (PET) market has been predicted by Transparency Market Research (TMR) to bear a significantly fragmented characteristic due to the presence of several industry players. According to a market research publication penned by TMR, five companies, viz. DAK Americas, Octal, Jiangsu Sanfangxiang, M&G Chemicals, and Indorama Ventures, had secured an aggregate approximate share of only 39.0% in the recent 2015. In the next few years, the market could testify an intense level of competition due the enormous count of PET resin suppliers and low switching expenses.

As per the TMR report, the global PET market has been anticipated to earn around US$39.16 bn by 2024 from US$23.73 bn in 2015 at a 5.80% CAGR for the forecast timeframe 2016–2024. By application, beverages could remain as a dominant market for PET. By region, Asia Pacific has been foreseen to rise with a higher share, considering its over 35.0% share achieved in 2015.

Players operating in the global PET market have been expected to make continuous efforts to introduce new offerings for cementing their position with a handsome share in future. Furthermore, expansion could be a prime strategy adopted for achieving full chain margins, lowering operational expenses, and improving global capacity share. For instance, in 2015, Reliance Industries Ltd. (RIL) had publicized the commissioning of PET resin plant of 650 KTA capacity and purified terephthalic acid (PTA) capacity of 1,150 KTA in Gujarat. These plants could apparently be put to operation for preparing polyester plastic used in plastic bottles, foods and beverages, packaging, and clothing.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=415

PET Packaging Replacing Traditional Glass Packaging Strengthens Market

The world PET market has been projected to exhibit a highly dynamic nature throughout the course of the forecast period. The growth of the market could be impacted positively with the latest trend of the replacement of conventional glass packaging with PET packaging. According to the authors of the report, the market could gain a telling impetus on the back of the high recyclability of PET. Products such as raincoats and carpets which do not require virgin PET have been forecasted to make the best use of the 100.0% recyclable property of PET packaging. Most of these packaging could be reused by manufacturers.

In this regard, companies have been envisaged to receive high profit margins in the coming years. Moreover, the demand for PET products could augment further, especially in emerging regions, ensuring a strong market growth in the near future.

Strict Government Regulations Pertaining to PET Application Break Momentum

The international PET market has been envisioned to face restrictions in its growth with the implementation of tight government regulations and intense volatility in the prices of crude oil.

However, there could be attractive business opportunities birthing from the surging demand for packaged food bolstered by the growing consumption of processed and frozen food. The demand for PET in the food and beverage sector on the part of carbonated soft drinks packaging has been prognosticated to bode well for the market. Factors such as eco-friendly substitution and the elevating demand for automotive and electronics applications could unveil new avenues for players. Besides these, strong economic growth, innovative packaging, and rapid urbanization have been prophesied to drive the growth of the market.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=415

The information presented in this review is based on a TMR report, titled "Polyethylene Terephthalate Market (Application - Beverages (Bottled Water, Carbonated Drinks, and Juices and LDP), Films, Food Packaging, and Cosmetic Bottles and Household Products) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024."

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Automotive Solenoid Valve Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2017 - 2025" report to their offering.

Albany, NY -- (SBWIRE) -- 12/18/2017 -- Valves play an important role in the automotive industry, as they controls the flow of water, fuel, and exhaust gases in the engine and other parts of the vehicle. In the global automotive market, sudden rise in the production of vehicles, and the introduction of electric-powered vehicles with advance technology such as antilock braking system, start stop system, push button start, and automatic transmission control in vehicles. The carbon emission norms laid down for automobiles have encouraged the manufacturers to produce fuel-efficient vehicles, which in turn has led to an increase in demand for automotive valves. An automotive solenoid valve has significant usage in standard vehicle applications such as automatic door lock, motor starter, steering locking system, fuel valve control, and anti-lock braking system. Additionally, a solenoid valve has advantages over other kinds of valves, as it is fast in operation and is suitable for electronic functions such as door locking system and anti-lock braking system.

The global automotive solenoid valve market can be segmented based on application, function, valve design, vehicle, electric vehicle, and region. In terms of application, the solenoid valve market can be classified into engine control & cooling system, fuel & emission control, safety & security, body control & interior, and HVAC. The customer are attracted towards the standard vehicles such as high accelerating power, fuel efficiency, auto lock system, high performance vehicles.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=32873

This is anticipated to propel the engine control & cooling system segment during the forecast period. Based on function, the automotive solenoid valve market can be segmented into fuel control, gas control, and motion control. Demand for fuel control in the global automotive market has been rising significantly. This is expected to propel the adaptive fuel control segment of the automotive solenoid valve market during the forecast period. In terms of design, the automotive solenoid valve market can be segmented into 2-way valve, 3-way valve, 4-way valve, and 5-way valve. The 3-way valve segment is expected to expand at a significant growth rate during the forecast period. The major reason for the expansion of the market include rise in usage of 3-way valve in automotive engines. Based on vehicle, the automotive solenoid market can be segregated into passenger vehicle, light commercial vehicle, and heavy commercial vehicle. The passenger vehicle segment is anticipated to account for a key share of the automotive solenoid valve market, followed by light commercial vehicle and heavy commercial vehicle segments, during the forecast period. In terms of electric vehicle, the automotive solenoid valve market can be segmented into battery vehicle, hybrid electric vehicle, and plug in hybrid electric vehicle. Increase in government support for green vehicles is propelling the demand for electric vehicles. This, in turn, is augmenting the demand for automotive solenoid valve. The hybrid electric vehicle segment is anticipated to hold a prominent share of the automotive solenoid valve market during the forecast period.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=32873

In terms of region, the global automotive solenoid market can be segregated into North America, Europe, Asia Pacific, Middle East & Africa, and Latin America. Asia Pacific is the dominant market for the automotive sector, wherein India China, and Japan are the leading contributors, due to the increase in production of vehicles in these countries. Furthermore, rise in demand for advanced technology features such as antilock braking system, start-stop system, and automatic transmission are likely to boost the automotive solenoid valve market during the forecast period. The market in Europe is also estimated to witness significant growth, wherein Italy, Germany, Spain, and the U.K. are the prominent countries in automobile manufacturing.

Key players operating in the global automotive solenoid valve market are Continental AG, Hitachi Ltd., DENSO CORPORATION, ASCO Valve, Inc., and BorgWarner Inc.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Transparency Market Research has announced the addition of the “Aerospace Composites Market (Product - Carbon Fiber Composites, Glass Fiber Composites, and Aramid Fiber Composites; Application - Commercial & Business Aircraft, Military, Helicopters, and Space) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" report to their offering.

Albany, NY -- (SBWIRE) -- 12/18/2017 -- Nearly 50% of the global aerospace composites market was held by the top three players in 2015. These companies were Hexcel Corporation, Koninklijke Ten Cate, and Cytec Solvay Group. Despite its consolidated vendor landscape, the global aerospace composites market is witnessing moderate threat from new substitutes. Besides this, major players are faced with challenges in raw material processing.

As stated by Transparency Market Research (TMR) regardless of challenges, the market players are focused on improving their net worth. Many of them are using export as a tool for expanding their geographic footprint, while others are focusing on augmenting their production capacity. The degree of competition is thus forecast to remain high in the forthcoming years.

TMR calculated the global aerospace composites market to be valued at US$11.5 bn in 2015. Rising at CAGR of 9.1%, the market is forecast to reach US$24.8 bn by the end of 2024. By application, the demand for aerospace composites was the highest in the commercial and business aircraft segment, which held over 57.17% of the overall market in 2015. This segment is also expected to continue leading the global landscape through the course of the forecast period.

Request For Report Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=21086

Regionally, North America was at the lead, holding nearly 35.4% of the global aerospace composites market in 2015. While North America will continue dominating, Europe and Asia Pacific will soon emerge at the market's forefront. Of these, growth witnessed in Asia Pacific will be higher than other regional segments.

Demand for Lightweight Composite Materials for Aircraft Manufacturing to Aid Growth

Due to their lightweight composite materials are considered ideal for use in aircraft manufacturing. This, coupled with the rising demand for improved fuel efficiency in aircrafts, will accelerate the pace of gains for the global aerospace composites market. Using ultra lightweight composite materials can help aircrafts increase their payloads and fuel-carrying capacity. In the military sector, the features is considered indispensable to increase the mission duration and loiter time for aircrafts. In addition, using lightweight composites can help the sector tackle carbon emissions better.

"The aerospace industry accounts for barely 3% of the global carbon emission. However, there is forecast for the same to increase in the coming years, thus affecting the global climate," said a lead TMR analyst. "As composite materials are helpful in lowering carbon emission, they are increasingly preferred by aircraft manufacturers," he added. Besides this, the market is gaining impetus from the rising number of airline passengers. The increasing demand from military and space technology sectors will boost the market as well.

Request For Report Table of Content (TOC): https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=21086

High Cost of Manufacturing to Hinder Market

On the downside, the high cost of manufacturing composite materials is one of the leading causes restraining the market. Expenditure incurred in the process is especially high during designing and fabrication. In addition, the cost of carbon fiber composites, which are widely used across the aerospace industry, will continue remaining high due to the use of high-grade carbon fibers in them. Existing challenges of transferring knowledge and skills due to the steady decline in aerospace manufacturing employment will negatively impact the market as well. The growing shortage of trained individuals and aging of the existing workforce pose critical challenge to the overall aerospace composites market. Nevertheless, with advancements in manufacturing techniques and the recent developments of software tools will help the market pace up in the near future.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm