Aurora, Ontario -- (SBWIRE) -- 12/03/2010 -- Following preliminary tests that took place in the first six months of 2009, Greencell Technologies is pleased to report that it has now moved into two advanced phases of testing their proprietary Hydrogen Enrichment System the HydroCell. November 15, 2009.

Get the latest news on hydrogen testing technologies. Keep updated. Avoid online scam.

Greencell Technologies can now confirm that a Canadian transport company has agreed to test the Hydrocell on their fleet of vehicles. The class 8 vehicles have been equipped with the Hydrogen Enrichment System since September 2009.

The Electronic Control Module (ECM) data that is being collected will be downloaded on November 16th, 2009 and the vehicles will then run without the Hydrocell until the end of November at which point the ECM data will again be downloaded and compared to the earlier results to establish fuel savings.

Following the results of this test the company will then enter into a dual emissions test where vehicles running with the Hydrocell will be compared to vehicles running without to establish emission reductions.

The final results are expected to concur with the tests conducted earlier in the year and will be released in advance of the company's initial public offering (IPO) which is scheduled to take place in February 2010 on the Frankfurt Exchange in Germany.

GreenCell Technologies is a Canadian company dedicated to designing and bringing to market, technology-based products for the transportation industry. The current product is called the Hydrocell, an on-board, on-demand hydrogen generator engineered specifically for the diesel trucking and haulage industries.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 12/02/2010 -- GreenCell Technologies through their most recent round of testing have discovered a method to double the existing hydrogen output of their proprietary Hydrogen Enrichment System the HydroCell. January 10, 2010.

Get the latest news on hydrogen testing technologies. Keep updated. Avoid online scam. GreenCell Technologies is pleased to announce that they have discovered a method to double the existing hydrogen output of their proprietary Hydrogen Enrichment System the HydroCell.

In addition to this recent discovery the company has been conducting extensive lab tests to establish the most efficient electrolyte mixture and the optimal Anode to Cathode distance for maximum hydrogen production.

Both tests have led to modifications that not only increase the hydrogen output but also result in significantly reduced manufacturing costs.

Additional testing further to that conducted in November 2009, is currently underway from the 5th of January 2010 utilizing trucks installed with the Hydrocell running.

The Electronic Control Data (ECD) will then be downloaded and used in direct comparison to vehicles running the same route under the same conditions which are not equipped with the HydroCell.

GreenCell Technologies is scheduled for an initial public offering (IPO) of their shares in February 2010. The company will expand into larger facilities in February and based on the most recent testing as well as the success of other Green Energy IPO's the company is expecting a very successful launch.

GreenCell Technologies is a Canadian company dedicated to designing and bringing to market, technology-based products for the transportation industry. The current product is called the Hydrocell, an on-board, on-demand hydrogen generator engineered specifically for the diesel trucking and haulage industries. http://www.greencelltek.com/

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 12/02/2010 -- Commercial First Trading Corporation is pleased to announce the release of their special report on green technology and related sectors. January 28, 2010.

Astute investors know that spotting a trend on the horizon, or in its infancy, can offer a number of investment opportunities today. That was the case with green or clean technologies (greentech/cleantech) a year ago and that remains the case also today. The world has embraced technologies that offer the opportunity for a cleaner planet and healthier people and many companies have emerged to lead this movement. Gets the latest news on hydrogen testing technologies. Keep updated. Avoid online scam.

Renewable Energy; its Not Your Father's Fossil Fuel

Renewable energy is a big player in this sector and offers a glimpse of what will soon be commonplace, based partly on trends and partly on government mandates. Cleaner burning fuels, greater mileage, efficient electrical networks and alternate means for powering vehicles are all at the center of the design and manufacturing that will be the central focus for generations to come.

Municipalities and public companies have slowly been adapting to renewable energy. In New River Valley in Virginia, the truck fleet owned by the Pepsi Bottling Group has added twenty-one hydrogen-injected trucks utilizing a fuel system produced by Dynamic Fuel Systems, Inc. a Canadian firm. The portable hydrogen generator that injects hydrogen into the engine's intake increases mileage and reduces emissions.

Myriad Clean And Green Opportunities

The biggest benefactors of the green/clean tech trend will be manufacturers of electric hybrid vehicles, battery manufacturers, smart grid technology companies, green lighting technology, producers of wind power equipment and non-toxic cleaning products.

From 2002 to 2008, investment in greentech/cleantech grew to $15 billion. That does not include a massive commitment by world governments and major banks. Many countries, that adapted stimulus packages to climb out of the global economic malaise, included big greentech/cleantech spending as a priority area for research and job creation.

Reducing Emissions
A123 Systems Inc. (Symbol AONE.O), a maker of lithium-ion batteries and subsidized by the U.S. government, went public in September (2009) and immediately, the share price jumped 50%. This put the first-day performance of AONE.O solidly in second place for the year for most successful. debuts. The surprising level of interest in the company's IPO prompted A123 to increase the number of shares available by 2.4 million. A123 System's batteries power the growing electric car market, A sector that is seeing increased interest by investors.

The collapse of Lehman Bros had a chilling effect on the IPO market during 2009, but that may all change. An avalanche of attention is focused on renewable energy and clean technologies and that could lead to some interesting IPO possibilities.

Solar And Smart Grids
Silver Spring Networks is believed by many observers to be a potential IPO in 2010. Smart grid technology utilizes IT to manage the flow of power over a network. This is done by exchanging information between the provider and the customer. This system is fully automated and allows different devices, which make up the network, to talk to each other. Silver Spring Networks partnered with GE Energy to build a smart grid for a U.S. utility company. GE will provide smart meters for the project.

Rooftop solar panels can provide cheap renewable energy. Solyndra is a manufacturer of photovoltaic systems for the commercial rooftop market based in Freemont California. The company entered into an agreement with Milan, Italy-based Sun System. Solyndra also received $535 million from the Department of Energy in loan guarantees. In addition to the loan guarantees, the company has also received $600 million from investors.

Electric Auto IPO
There has been talk amongst those in the know that electric-car manufacturer, Tesla Motors could be considering an initial public offering. Although the company has denied the rumors, the move would be good timing for the well-funded firm. Tesla has managed to raise $783 million from some big-money investors and venture capital firms. Tesla announced profitability in July of 2009. As the large internal-combustion engine companies release new hybrid and electric models, the maker of the sleek Model S sedan would stir things up in 2010.

GreenCell Technologies IPO
Another highly anticipated IPO is the Canadian company GreenCell Technologies. The HydroCell they produce which is an onboard hydrogen and oxygen gas generator reduces fuel emissions by 50% and fuel consumption by 30%.

Technology That Is Here To Stay
The writing is on the wall; cleantech/greentech is the future of research, manufacturing and investment. The U.S. Department of Energy, which has pledged nearly $100 billion to back a wide variety of green technologies, is just one example of the enormous interest in this sector. The evolving industry based on low carbon research and development will propel this segment and make it mainstream.

The need for high-mileage vehicles, cleaner air, wise power usage and even social media will continue to be compelling forces well into the future.

Commercial First Trading Corporation is a leading financial services firm offering a wide range of services within investment management and wealth management services. The company serves clients worldwide including corporations, institutions, and individuals.

GreenCell Technologies is a Canadian company dedicated to designing and bringing to market, technology-based products for the transportation industry. The current product is called the Hydrocell, an on-board, on-demand hydrogen generator engineered specifically for the diesel trucking and haulage industries.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 12/01/2010 -- GreenCell Technologies GT5 investor information can be contacted on GreenCell Technologies Inc. 7-21 Industry Street, Aurora, Ontario L4G 1X6 investors (at) greencelltek.com. GreenCell Technologies trades on the Frankfurt Stock Exchange Open Market Symbol: GT5

Press Releases are issued online by EquityStoryAG. Seitzstrasse 23, 80538 Munich, Germany

GreenCell Technologies Inc is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

Listed on the Frankfurt Exchange: GT5 - Last Trade

The HydroCell produces Hydrogen Gas, on demand, and adds it to the air drawn into a diesel engine. This small quantity of Hydrogen has large effects on the combustion process. The result is approximately 10% fuel savings and up to a 60% reduction in greenhouse gas emissions (nitrous oxides, hydrocarbons and carbon monoxide).

GreenCell Tek GT5 is also involved in the Solar Energy market. We are currently conducting research and developing strategies to open an alternative energy division that will offer product, consultation and installation services for the Canadian market.

The HYDROCELL system is a safe and reliable product designed exclusively for the Diesel Transport Truck market. The HYDROCELL draws only 25 Amps from the vehicles 12 Volt system and generates enough hydrogen through-out the entire RPM range to enhance combustion.

GreenCell Technologies advanced feedback system monitors several conditions and adjusts the electrolysis process, to provide safe and efficient production of Hydrogen gas. The system was designed to operate in a temperature range of -40 to +60C and has an in-cab indicator to show system status. Installation requires no modification to the engine and does not affect the manufacturer's warranty. The only maintenance needed is the addition of distilled water every 250 hours of operation.

It has been proven in validated tests that adding Hydrogen to fuel in an internal combustion engine will increase the flame speed. At various RPM's the fuel that is present in the cylinder is not completely burned during the combustion cycle due to the flame speed of petroleum based fuels and the amount of time the combustion cycle is allowed, due to engine speed and load. The addition of Hydrogen gas increases that flame speed and allows for all the fuel in the cylinder to be burned during each combustion cycle. This increases the power produced during that cycle which results in a net savings in fuel use of 10% on average. Greenhouse Gas emissions are also reduced significantly as the major cause of those emissions is un-burnt fuel in the exhaust. Average of 10% Fuel Saving, Produces Hydrogen on demand, Operates only when engine is running, Low Maintenance – requires water every 200 operating hours and Fail-Safe design – stores no Hydrogen.

Applications are for Transport Trucks, School Busses, Municipal Heavy Equipment – Snow-Plows – Garbage & Recycle Trucks, Farm Heavy Equipment – Tractors – Sprayers/Bailers & Harvesters, Construction Heavy Equipment - Bulldozers - Dump Trucks – Black-Hoes and Diesel-Electric Generators.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 11/30/2010 -- GreenCell Technologies is proud to announce the introduction and launch of HydroCell™, a product critical to an integrated Hydrogen Enrichment System designed to increase fuel efficiencies in diesel trucks, and eventually in all diesel engines. GreenCell has developed a new approach to the anode-cathode arrangement to increase hydrogen output and decrease fuel consumption overall.

HydroCell™ was designed by engineers to operate below the vehicles intake air pressure, thereby eliminating the risk as a result of gas leakage. GreenCell Tek GT5 also designed and specified all key component specifications to exceed requirements, due to the extreme nature of this environment. This has resulted in a cost effective and reliable product, which truly makes Green Technology affordable within the transportation industry, specifically offering costs savings for logistics managers and fleet owners.

GreenCell uses circuits employing the latest multiphase switch-mode topology to gain efficiencies of up to 96% and merged them with state of the art sensors and rugged controls to ensure the Hydrogen-enabled system is safe and reliable. Over a fleet-wide test conducted recently over the past three months, Class 8 vehicles were equipped with the innovative GreenCell Hydrogen Enrichment System, drawing power from the vehicles electrical system and generating enough hydrogen throughout the entire RPM range to enhance combustion.

The HydroCell™ is an electrolysis-based on-demand Hydrogen generator designed specifically for the transport industry. The product draws a small amount of power from the vehicles electrical system and uses it to produce Hydrogen gas from a water-based solution. The HydroCell™ directs the produced Hydrogen gas to the intake of the vehicles engine where it acts as a catalyst during the normal combustion cycle. This creates more power and fewer emissions, burning only the existing fuel in the cylinder, resulting simply in less fuel being required to operate the vehicle.

Greencell Technologies Inc., Greencell Tek GT5. GreenCell Tek is a Canadian company dedicated to designing and bringing to market, technology-based products for the alternative energy marketplace.

GT5 GreenCell Technologies Inc is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market.

The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

Listed on the Frankfurt Exchange: GT5

For further information, contact the GreenCell Technologies Inc. head office in Canada, through email, which can be sent to: Investors@greencelltek.com

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 11/30/2010 -- GT5 GreenCell Technologies is proud to announce it has successfully completed another round of advanced testing with significant HydroCell™ results. The integrated GreenCell Hydrogen Enrichment System is now expected to double anticipated hydrogen output, and further increase fuel efficiencies in diesel trucks around the world.
These new results augment earlier tests conducted from November 2009 to January 2010, whereby Electronic Control Data was downloaded from vehicles equipped with the HydroCell™ and directly compared to those without the HydroCell™ running the same route and under the same conditions.

Hydrogen, as a fuel, is emission free and the only by-product of combustion is water. It is the most abundant element in the universe and is the fuel of choice for the Space Shuttle's main engine. The addition of a GreenCell Hydrogen Enrichment System is similar to adding a Supercharger to an engine.

To assure continued fuel savings, the HydroCell™ is always tested for performance, efficiency, reliability and hydrogen output on numerous vehicles, to enhance its core design and help refine the product specifications for engineers. In addition to recent discoveries, GreenCell is also conducting extensive lab tests to establish the most efficient electrolyte mixture and the optimal Anode to Cathode distance for maximum hydrogen production. These tests will lead to new modifications to increase hydrogen output, boost fuel efficiency overall and reduce manufacturing costs.

The HydroCell™ is an electrolysis-based on-demand Hydrogen generator designed specifically for the transport industry. The product draws a small amount of power from the vehicles electrical system and uses it to produce Hydrogen gas from a water-based solution. The HydroCell™ directs the produced Hydrogen gas to the intake of the vehicles engine where it acts as a catalyst during the normal combustion cycle. This creates more power and fewer emissions, burning only the existing fuel in the cylinder, resulting simply in less fuel being required to operate the vehicle.

Greencell Technologies Inc., Greencell Tek GT5. GreenCell Tek is a Canadian company dedicated to designing and bringing to market, technology-based products for the alternative energy marketplace.

Listed on the Frankfurt Exchange: GT5 - Last Trade € 3.218 per share

GT5 GreenCell Technologies Inc is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market.

The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

For further information, contact the GreenCell Technologies Inc. head office in Canada, through email, which can be sent to: Investors@greencelltek.com

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 11/29/2010 -- GT5 GreenCell Technologies: Emissions and Total Energy Consumption of a Multicylinder Piston Engine running on Gasoline and a Hydrogen-Gasoline Mixture

Johz F. Cassidy Lewis Research Center. Chehnd, Ohio 44135 An experimental program using a multicylinder reciprocating engine was performed to extend the efficient lean operating range of gasoline by adding hydrogen. Both bottled hydrogen and hydrogen produced by a research methanol steam reformer were used. These results were compared with results for all gasoline. A high-compression-ratio, 7. 4-liter (472-in. 3) d i s placement production engine was used. Apparent flame speed was-used to describe the differences in emissions and performance. Therefore, engine emissions and performance, including apparent flame speed and energy lost to the cooling system and the exhaust gas, were measured over a range of equivalence ratios for each fuel. The results were used to explain the advantages of adding hydrogen to gasoline as a method of extending the lean operating range. The minimum-energy-consumption equivalence ratio was extended to leaner conditions by adding hydrogen, although the minimum energy consumption did not change. All emission levels decreased at the leaner conditions. Also, adding hydrogen significantly increased flame speed over all equivalence ratios. Engine performance and emissions with hydrogen from the methanol reformer were about the same as those with bottled hydrogen.

GT5 GreenCell Technologies, Canada - An experimental program using a multicylinder reciprocating engine was performed to extend the efficient lean operating range of gasoline by adding hydrogen. Both bottled hydrogen and hydrogen produced by a research methanol steam reformer were used. These results were compared with results for all gasoline. A high-compressionratio, 7.4-liter (472-in. 3) displacement production engine was used. Apparent flame speed was used to describe the differences in emissions and performance. Therefore, engine emissions and performance, including apparent flame speed and energy loss to the cooling system and the exhaust gas, were measured over a range of equivalence ratios for each fuel.

The results were used to explain the advantages of adding hydrogen to gasoline as a method of extending the lean operating range. The minimum-energy-consumption equivalence ratio was extended to leaner conditions by adding hydrogen, although the minimum energy consumption did not change. All emission levels decreased at the leaner conditions. Also, hydrogen addition significantly increased flame speed over all equivalence ratios. Engine performance and emissions with hydrogen from the methanol reformer were about the same as those with bottled hydrogen.

GT5 GreenCell Technologies, Canada - INTRODUCTION . Increasing the efficiency of reciprocating engines has constantly been pursued since Otto-cycle engines were first used as vehicle powerplants. The important effects of fuel consumption on factors such as vehicle range, operating cost, and vehicle structures have always been important design considerations. During the past decade, the impact of environmental factors and a national interest in energy conservation have accentuated the need to produce clean and efficient engines. Many concepts for improving efficiency and meeting emissions standards have been tested and reported in the A review of the literature dealing with the problems of lean-mixture-ratio operation shows that a fuel with a low lean flammability limit and a high flame speed might yield low exhaust emissions at ultralean conditions. Hydrogen was identified in reference 5 as having those properties and has been the subject of much investigation. Using a small quantity, on a weight basis, of hydrogen as a supplement to gasoline was chosen as a way to extend lean engine operation. Onboard generation of hydrogen was selected as a feasible way to use hydrogen in a mobile application. The Jet Propulsion Laboratory I conducted a similar program (refs. 6 and 7) in which hydrogen generated by the partial oxidation of gasoline was used as a fuel supplement for lean engine operation. Various commercial processes to generate hydrogen were analyzed for their applicability. The catalytic steam reformation of methyl alcohol (methanol) using engine exhaust heat was selected as being the most efficient process to generate hydrogen that was also compact enough to be carried on a vehicle. One disadvantage is that it would require a second fuel and a second fuel system.

A research system to generate hydrogen by methanol reformation was built and installed on a multicylinder engine in an existing engine test setup. An independent and parallel program on catalyst evaluation was performed but is not part of this report. An engine test program was conducted using gasoline and additions of gaseous hydrogen and reformed methanol to evaluate the effects of hydrogen-gasoline fuel mixtures on exhaust emissions, extension of lean engine operating limits, and fuel flammability limits and combustion flame speed.

GT5 GreenCell Technologies, Canada - This report presents a brief description of the breadboard methanol reformation system and the results of fuel and engine testing. The data were taken in the U. S. customary system of units and converted to SI units for this report.

GreenCell Technology is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 11/26/2010 -- The HydroCell produces Hydrogen Gas, on demand, and adds it to the air drawn into a diesel engine. This small quantity of Hydrogen has large effects on the combustion process.

GreenCell Technologies Inc is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

GT5 GreenCell Technologies on Hydrocell: The result is approximately 10% fuel savings and up to a 60% reduction in greenhouse gas emissions (nitrous oxides, hydrocarbons and carbon monoxide).

GreenCell Tek is also involved in the Solar Energy market. We are currently conducting research and developing strategies to open an alternative energy division that will offer product, consultation and installation services for the Canadian market.

The HYDROCELL system is a safe and reliable product designed exclusively for the Diesel Transport Truck market. The HYDROCELL draws only 25 Amps from the vehicles 12 Volt system and generates enough hydrogen through-out the entire RPM range to enhance combustion.

GreenCell Technologies's advanced feedback system monitors several conditions and adjusts the electrolysis process, to provide safe and efficient production of Hydrogen gas. The system was designed to operate in a temperature range of -40 to +60C and has an in-cab indicator to show system status. Installation requires no modification to the engine and does not affect the manufacturer's warranty. The only maintenance needed is the addition of distilled water every 250 hours of operation.
It has been proven in validated tests that adding Hydrogen to fuel in an internal combustion engine will increase the flame speed. At various RPM's the fuel that is present in the cylinder is not completely burned during the combustion cycle due to the flame speed of petroleum based fuels and the amount of time the combustion cycle is allowed, due to engine speed and load. The addition of Hydrogen gas increases that flame speed and allows for all the fuel in the cylinder to be burned during each combustion cycle. This increases the power produced during that cycle which results in a net savings in fuel use of 10% on average. Greenhouse Gas emissions are also reduced significantly as the major cause of those emissions is un-burnt fuel in the exhaust.

GT5 GreenCell Technologies on Hydrocell: Average of 10% Fuel Savings, Produces Hydrogen on demand, Operates only when engine is running , Low Maintenance – requires water every 200 operating hours and Fail-Safe design – stores no Hydrogen.

Solar Energy. GT5 GreenCell Technologies is currently conducting research and developing strategies to manufacture Solar Photovoltaic (PV) products and bring them to market. The Solar Energy market is being driven by government incentives including significant rebates and power buy-back contracts. These incentives have fueled a growth of the PV markets in Canada, which have been averaging 26% annually since 1993, and about 36% annually since 2000.

GT5 GreenCell Technologies Inc is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market.

The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 11/24/2010 -- GreenCell Technologies GT5 Develops New Wireless Product to Complement HydroCell™ unit. GreenCell Technologies Inc. is pleased to announce the successful development and forthcoming release of a new product to complement its HydroCell™ unit. Based on recent feedback from long-haul truckers, the GreenCell research team has now designed a wireless status indicator that will be manufactured and sold as a package in tandem with its popular Hydrogen Enrichment System.

The innovative device simply plugs into the cigarette lighter on the dashboard and instantly indicates the current status of the HydroCell™ and its present operating condition. The driver will instantly be aware if the HydroCell™ is in need of water and can rectify the condition which will minimize downtime.

The HydroCell™ requires the addition of water every 40 - 50 hours of operation and will shut down and not generate Hydrogen if allowed to run dry. This device will ensure maximum fuel savings by eliminating downtime due to lack of water. HydroCell™ has exceeded expectations and is typically doubling hydrogen output and increasing fuel efficiencies for transportation companies and independent drivers alike.

Hydrogen, as a fuel, is emission free and the only by-product of combustion is water. It is the most abundant element in the universe and is the fuel of choice for the Space Shuttle's main engine.

To assure continued fuel savings, the HydroCell™ is always tested for performance, efficiency, reliability and hydrogen output on numerous vehicles, to enhance its core design and help refine the product specifications for engineers. In addition to recent discoveries, GreenCell Technologies GT5 is also conducting extensive lab tests to establish the most efficient electrolyte mixture and the optimal Anode to Cathode distance for maximum hydrogen production. These tests will lead to new modifications to increase hydrogen output, boost fuel efficiency overall and reduce manufacturing costs.

The HydroCell™ is an electrolysis-based on-demand Hydrogen generator designed specifically for the transport industry. The product draws a small amount of power from the vehicles electrical system and uses it to produce Hydrogen gas from a water-based solution. The HydroCell™ directs the produced Hydrogen gas to the intake of the vehicles engine where it acts as a catalyst during the normal combustion cycle. This creates more power and fewer emissions, burning only the existing fuel in the cylinder, resulting simply in less fuel being required to operate the vehicle.

GT5 GreenCell Technologies Inc. is a Canadian company, dedicated to designing and bringing to market technology-based products for the transportation and energy industries.

For further information, contact the GreenCell Technologies Inc. head office in Canada, through email, which can be sent to: Investors@greencelltek.com

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 10/29/2010 -- GreenCell Technologies, Canada Part 2: In some ways, a gaseous hydrogen fuel leak is less dangerous than a leak of diesel fuel or gasoline. Leaking diesel fuel and gasoline can puddle and spread over a large area, and the puddles will persist because they evaporate slowly. Gaseous hydrogen leaks tend to be vertical, with only a relatively narrow area/volume in which a flammable mixture exists—the hydrogen quickly rises and dissipates in open air to nonhazardous levels.

If designed properly, the most likely location of a major hydrogen leak from a vehicle will be through the pressure relief device (PRD) on the hydrogen fuel storage cylinders, which should vent away from the occupied area of the vehicle. PRDs are designed to vent the entire contents of a hydrogen tank in only a few minutes—after which there is no lingering risk of hydrogen fire or explosion if the release was in the open air. Large hydrogen leaks inside buildings are more dangerous unless the facility has been designed to evacuate the leaked gas and to minimize ignition sources at ceiling level.

GreenCell Technologies, Canada - Leaking liquid hydrogen can pool and spread, but will quickly evaporate as it is heated by the surrounding air. The distance it will spread and the rate of evaporation will depend on the size of the leak and on ambient conditions. As it evaporates, the cloud of gaseous hydrogen formed over the spill may move horizontally as it rises and dissipates. This hydrogen cloud may be cold enough to cause frostbite to exposed skin and should be avoided.

While diesel fuel and gasoline leaks are easily visible and accompanied by a strong characteristic smell, gaseous hydrogen leaks are invisible and odorless. The only indication of a gaseous hydrogen leak may be a whistling noise similar to escape of other high-pressure gases. A liquid hydrogen leak may be accompanied by an area of fog surrounding the leaking hydrogen and/or the formation of frost on the tank or lines in the vicinity of the leak, because the super cold hydrogen cools the surrounding air and causes water vapor to condense.

Based on hydrogen's chemical and physical properties, there are a number of general principles that govern safe design and use of hydrogen fuel. These are essentially the same principles that apply to the use of any gaseous fuel (e.g., natural gas), but their application may be slightly different based on the properties of hydrogen. The most important safety principle in any situation is education—making anyone who will come into contact with a vehicle aware of a potential hazard. For hydrogen and other alternative-fueled vehicles, this is done with appropriate labeling to let users, emergency responders, and the public know that hydrogen is present.

GreenCell Technologies, Canada - As with other motor fuels, fire and explosions are the most significant everyday hazards associated with hydrogen. Also as with other fuels, a hydrogen leak from a vehicle's fuel or engine system, or from a fueling station, provides the starting point for all fire and explosion hazards. Safe design for using hydrogen, both for vehicles and for fuel stations and buildings, therefore, requires attention to these safety principles: Properly label all vehicles that use hydrogen fuel.

Avoid fire and explosion by: Avoiding leaks through proper design and maintenance, Providing leak detection systems to detect leaks and, if a leak is detected, shut off the fuel system as soon as possible, Removing ignition sources from areas where leaked hydrogen might be present, and GreenCell Technologies, Canada - Properly ventilating all enclosed spaces where leaked hydrogen might accumulate. These general principles translate into specific design and operating requirements for hydrogen-fueled vehicles, the facilities that will house or maintain them, and hydrogen fuel stations. In most aspects, commercial vehicles powered by hydrogen will be identical to those powered by diesel fuel, but some hydrogen-specific design elements are required. Likewise, operation of these vehicles will be similar to operation of diesel-fueled vehicles, with a few exceptions. Each vehicle manufacturer will develop their own designs, which are likely to vary significantly in the details, while adhering to the same general design principles noted above.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 10/29/2010 -- GreenCell Technologies: Emissons and Total Energy Consumption of a Multicylinder Piston Engine Running on Gasoline and a Hydrogen-gasoline Mixture

Johz F. Cassidy Lewis Research Center. Chehnd, Ohio 44135 An experimental program using a multicylinder reciprocating engine was performed to extend the efficient lean operating range of gasoline by adding hydrogen. Both bottled hydrogen and hydrogen produced by a research methanol steam reformer were used. These results were compared with results for all gasoline. A high-compression-ratio, 7. 4-liter (472-in. 3) d i s placement production engine was used. Apparent flame speed was-used to describe the differences in emissions and performance. Therefore, engine emissions and performance, including apparent flame speed and energy lost to the cooling system and the exhaust gas, were measured over a range of equivalence ratios for each fuel. The results were used to explain the advantages of adding hydrogen to gasoline as a method of extending the lean operating range. The minimum-energy-consumption equivalence ratio was extended to leaner conditions by adding hydrogen, although the minimum energy consumption did not change. All emission levels decreased at the leaner conditions. Also, adding hydrogen significantly increased flame speed over all equivalence ratios. Engine performance and emissions with hydrogen from the methanol reformer were about the same as those with bottled hydrogen.

GreenCell Technologies, Canada - An experimental program using a multicylinder reciprocating engine was performed to extend the efficient lean operating range of gasoline by adding hydrogen. Both bottled hydrogen and hydrogen produced by a research methanol steam reformer were used. These results were compared with results for all gasoline. A high-compressionratio, 7.4-liter (472-in. 3) displacement production engine was used. Apparent flame speed was used to describe the differences in emissions and performance. Therefore, engine emissions and performance, including apparent flame speed and energy loss to the cooling system and the exhaust gas, were measured over a range of equivalence ratios for each fuel.

The results were used to explain the advantages of adding hydrogen to gasoline as a method of extending the lean operating range. The minimum-energy-consumption equivalence ratio was extended to leaner conditions by adding hydrogen, although the minimum energy consumption did not change. All emission levels decreased at the leaner conditions. Also, hydrogen addition significantly increased flame speed over all equivalence ratios. Engine performance and emissions with hydrogen from the methanol reformer were about the same as those with bottled hydrogen.

GreenCell Technologies, Canada - Intro . Increasing the efficiency of reciprocating engines has constantly been pursued since Otto-cycle engines were first used as vehicle powerplants. The important effects of fuel consumption on factors such as vehicle range, operating cost, and vehicle structures have always been important design considerations. During the past decade, the impact of environmental factors and a national interest in energy conservation have accentuated the need to produce clean and efficient engines. Many concepts for improving efficiency and meeting emissions standards have been tested and reported in the A review of the literature dealing with the problems of lean-mixture-ratio operation shows that a fuel with a low lean flammability limit and a high flame speed might yield low exhaust emissions at ultralean conditions. Hydrogen was identified in reference 5 as having those properties and has been the subject of much investigation. Using a small quantity, on a weight basis, of hydrogen as a supplement to gasoline was chosen as a way to extend lean engine operation. Onboard generation of hydrogen was selected as a feasible way to use hydrogen in a mobile application. The Jet Propulsion Laboratory I conducted a similar program (refs. 6 and 7) in which hydrogen generated by the partial oxidation of gasoline was used as a fuel supplement for lean engine operation. Various commercial processes to generate hydrogen were analyzed for their applicability. The catalytic steam reformation of methyl alcohol (methanol) using engine exhaust heat was selected as being the most efficient process to generate hydrogen that was also compact enough to be carried on a vehicle. One disadvantage is that it would require a second fuel and a second fuel system.

A research system to generate hydrogen by methanol reformation was built and installed on a multicylinder engine in an existing engine test setup. An independent and parallel program on catalyst evaluation was performed but is not part of this report. An engine test program was conducted using gasoline and additions of gaseous hydrogen and reformed methanol to evaluate the effects of hydrogen-gasoline fuel mixtures on exhaust emissions, extension of lean engine operating limits, and fuel flammability limits and combustion flame speed.

GreenCell Technologies, Canada - This report presents a brief description of the breadboard methanol reformation system and the results of fuel and engine testing. The data were taken in the U. S. customary system of units and converted to SI units for this report.

GreenCell Technology is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 10/29/2010 -- The Pepsi Bottling Group's truck fleet in the New River Valley region of Virginia has added 21 hydrogen-injected trucks in an effort to boost fuel efficiency and reduce emissions.

The trucks were purchased from Hydrogen Leasing Co., a subsidiary of Dynamic Fuel Systems' U.S. dealers, Hydrogen Fuel Systems Inc.

GreenCell Technologies, Canada: Dynamic Fuel Systems Inc., based in Canada, provides a transportable hydrogen generator retrofit targeted for use in the heavy tractor trailer industry.

The Pepsi Bottling Group's new hydrogen-injected trucks are equipped with Dynamic's Jetstar, an onboard portable hydrogen generator that injects small amounts of hydrogen into the air intake as a combustion stimulant. The process is designed to reduce nitrogen oxides and hydrocarbon emissions, resulting in more power and better fuel economy.

GreenCell Tek Canada: "The expansion of our fleet of alternative-fuel vehicles in the New River Valley region signals our commitment to playing an active role in helping Virginia achieve its long-term energy and climate objectives," said Bill Reeser, vice president and general manager of Pepsi Bottling Group's Virginia market unit. "These investments will also generate future cost savings for PBG, making it a winning proposition for everyone involved."

GreenCell Technology is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

The HydroCell produces Hydrogen Gas, on demand, and adds it to the air drawn into a diesel engine. This small quantity of Hydrogen has large effects on the combustion process. The result is approximately 10% fuel savings and up to a 60% reduction in greenhouse gas emissions (nitrous oxides, hydrocarbons and carbon monoxide).

GreenCell Technologies is also involved in the Solar Energy market. We are currently conducting research and developing strategies to open an alternative energy division that will offer product, consultation and installation services for the Canadian market.

GreenCell Tek Canada: The HYDROCELL system is a safe and reliable product designed exclusively for the Diesel Transport Truck market. The HYDROCELL draws only 25 Amps from the vehicles 12 Volt system and generates enough hydrogen through-out the entire RPM range to enhance combustion.

GreenCell's advanced feedback system monitors several conditions and adjusts the electrolysis process, to provide safe and efficient production of Hydrogen gas. The system was designed to operate in a temperature range of -40 to +60C and has an in-cab indicator to show system status. Installation requires no modification to the engine and does not affect the manufacturer's warranty. The only maintenance needed is the addition of distilled water every 250 hours of operation.

GreenCell Tek Canada: It has been proven in validated tests that adding Hydrogen to fuel in an internal combustion engine will increase the flame speed. At various RPM's the fuel that is present in the cylinder is not completely burned during the combustion cycle due to the flame speed of petroleum based fuels and the amount of time the combustion cycle is allowed, due to engine speed and load.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 10/29/2010 -- GreenCell Technologies Inc is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

The HydroCell produces Hydrogen Gas, on demand, and adds it to the air drawn into a diesel engine. This small quantity of Hydrogen has large effects on the combustion process. The result is approximately 10% fuel savings and up to a 60% reduction in greenhouse gas emissions (nitrous oxides, hydrocarbons and carbon monoxide).

GreenCell Tek is also involved in the Solar Energy market. We are currently conducting research and developing strategies to open an alternative energy division that will offer product, consultation and installation services for the Canadian market.

The HYDROCELL system is a safe and reliable product designed exclusively for the Diesel Transport Truck market. The HYDROCELL draws only 25 Amps from the vehicles 12 Volt system and generates enough hydrogen through-out the entire RPM range to enhance combustion.

GreenCell Technologies's advanced feedback system monitors several conditions and adjusts the electrolysis process, to provide safe and efficient production of Hydrogen gas. The system was designed to operate in a temperature range of -40 to +60C and has an in-cab indicator to show system status. Installation requires no modification to the engine and does not affect the manufacturer's warranty. The only maintenance needed is the addition of distilled water every 250 hours of operation.

It has been proven in validated tests that adding Hydrogen to fuel in an internal combustion engine will increase the flame speed. At various RPM's the fuel that is present in the cylinder is not completely burned during the combustion cycle due to the flame speed of petroleum based fuels and the amount of time the combustion cycle is allowed, due to engine speed and load. The addition of Hydrogen gas increases that flame speed and allows for all the fuel in the cylinder to be burned during each combustion cycle. This increases the power produced during that cycle which results in a net savings in fuel use of 10% on average. Greenhouse Gas emissions are also reduced significantly as the major cause of those emissions is un-burnt fuel in the exhaust: Average of 10% Fuel Savings; Produces Hydrogen on demand; Operates only when engine is running; Low Maintenance – requires water every 200 operating hours; and Fail-Safe design – stores no Hydrogen

Applications were: Transport Trucks; School Busses; Municipal Heavy Equipment – Snow-Plows – Garbage & Recycle Trucks; Farm Heavy Equipment – Tractors – Sprayers/Bailers & Harvesters; Construction Heavy Equipment - Bulldozers - Dump Trucks – Black-Hoes; and Diesel-Electric Generators
Solar Energy.

GreenCell Technologies is currently conducting research and developing strategies to manufacture Solar Photovoltaic (PV) products and bring them to market. The Solar Energy market is being driven by government incentives including significant rebates and power buy-back contracts. These incentives have fueled a growth of the PV markets in Canada, which have been averaging 26% annually since 1993, and about 36% annually since 2000.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Aurora, Ontario -- (SBWIRE) -- 10/29/2010 -- GreenCell Technologies, Canada: Today, virtually all commercial trucks are powered by diesel fuel, while private cars are fueled by gasoline. Supported by our National Energy Policy, a new generation of technologies is currently being developed that allow the use of hydrogen as a fuel to power cars and trucks. In the future, hydrogen may be used in one of three ways to power vehicles:

To produce electricity in a fuel cell, as a replacement for gasoline or diesel fuel in an internal combustion engine,1 or

GreenCell Technologies, Canada: As a supplement to gasoline or diesel fuel used in an internal combustion engine.

This document is intended to be a safety reference for commercial vehicle fleet owners and operators that use vehicles or auxiliary power units powered by hydrogen fuel. It was designed to provide commercial vehicle owners and operators with a basic understanding of the properties and characteristics of hydrogen, descriptions of the types of systems that might use hydrogen fuel on commercial vehicles, and practical guidelines for the safe use of hydrogen, both on vehicles and in vehicle maintenance and storage facilities.

Hydrogen is the most abundant element in our universe. In addition to being a component of all living things, hydrogen and oxygen together make up water, which covers 70 percent of the earth. In its pure form, hydrogen is a gas at normal temperatures and pressures; it is the lightest gas (even lighter than helium), with only 7 percent of the density of air. If you get it cold enough (-423 °F), gaseous hydrogen will liquefy, and it can be transported and stored in this form.

GreenCell Technologies, Canada: There is virtually no "free" hydrogen on earth—all of it is combined with other elements (mostly oxygen or carbon) in other substances. Every molecule of water contains two hydrogen atoms and one oxygen atom. Hydrocarbon fuels such as coal, gasoline, diesel, and natural gas also contain hydrogen. In the case of gasoline and diesel fuel, there are approximately two hydrogen atoms for every carbon atom, while natural gas contains four hydrogen atoms for every carbon atom. To be used as a fuel, hydrogen is typically separated from either water (via electrolysis) or from a hydrocarbon fuel (via reforming).

Regardless of whether hydrogen fuel will be used in a fuel cell main engine, a fuel cell APU, or an internal combustion engine, there are different ways that it can be stored on the vehicle. Some fuel stations include liquid hydrogen storage, but on the vehicle, hydrogen is usually stored as a gas at high pressure. It is also possible to store a liquid fuel (gasoline, diesel, or methanol) onboard a vehicle and then use an onboard reformer to separate the hydrogen just before it is used in the fuel cell engine. While this requires additional equipment on the vehicle, it removes the need for high-pressure gas storage. These different storage technologies can introduce significantly different potential hazards, including very high pressure (gaseous hydrogen storage), very low temperature (liquid hydrogen storage), or high temperature (liquid fuel reforming).

GreenCell Technologies, Canada: All motor fuels, including diesel fuel, gasoline, and natural gas also pose risks of fire and explosion if handled improperly. Hydrogen is no different. While there are risks, hydrogen can be as safe, or safer, than diesel and other fuels when vehicles and fuel stations are designed and operated properly.

All fuels require particular design and handling practices based on their properties, and all present certain hazards when mishandled. Understanding the properties of hydrogen is necessary to understanding what is required to use it safely.

GreenCell Technologies, Canada: Hydrogen gas is colorless, odorless, tasteless, and noncorrosive—and it is nontoxic to humans. It has the second widest flammability range in air of any gas, but leaking hydrogen gas rises and diffuses to a nonflammable mixture quickly. Hydrogen ignites very easily and burns hot, but tends to burn out quickly. A hydrogen flame burns very cleanly, producing virtually no soot, which means that it is also virtually invisible. The extremely low temperature of liquid hydrogen poses a severe frostbite hazard to exposed skin.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm