Fort Lauderdale, FL -- (SBWIRE) -- 01/14/2014 -- Popular  online HVAC retailer  DtiCorp.com (http://www.DtiCorp.com) is introducing the brand new  Honeywell LG1093AA46 Turbine Flame Sensor . The Honeywell Flame Monitor System is designed to detect ultraviolet radiation emitted by a hydrocarbon flame. A system consists of two sensors, LG1093, and one amplifier EG1033. The amplifier drives the sensors and provides an output for flame detection. Each amplifier will power up two sensors. The dimensions are 6.62 x 4.25 x 2.32 inches for the EG1033AA and 6.62 x 4.25 x 4.44 inches for theEG1033AB, AC and AD. The amplifiers are mounted through four .20 diameter holes 6.00 x 2.00 inches apart.

The sensors operate at 350 Vdc which is supplied by the amplifier. The sensors respond to ultraviolet light with a spectral range of 1850 to 2650 angstroms. TheLG1093AA sensor has a 3/4 NPT internal thread provided for attachment to the burner and a one inch external conduit thread for attachment to electrical conduit. The sensors are equipped with an internal 511 ohm, 2 watt wire wound current limiting resistor.

The LG1093AB, AC sensor housing has a 1.73 inch O.D. by .14 inch wide flange to clamp the sensor to the burner. The LG1093AB has a two pin connector and theLG1093AC has a two conductor armored cable provided for connection to the control panel. These sensors are equipped with internal 511 ohm, 2 watt wire wound resistor in series with a diode for current limit and reverse polarity protection.

Flame Detect Time:
- Typical 0. 1 sec.
- Max 1.0 sec.

Flame Loss Detect Time:
- 0.2 sec. max.

Vibration:
- .07 in./sec. to 200 Hz
- .35 in./sec. to 500 Hz
- Equivalent to 2.5 g acceleration

Temperature:
- Operation - 40°F to 350°F

Window Pressure Temperature:
- 150 PSIG at 400°F
- 750 PSIG at Room temperature

Special Certifications:
- The LG1093AA is Factory Mutual explosion proof tested to Class I Divisions I and 2, Groups B, C, and D.

European Certification:

The Flame Ultraviolet products Amplifiers EG1033AA, EG1033AC and EG1033ADalong with Sensor LG1093AA meet Electromagnetic Compatibility Directive 89/336/EEC and Low Voltage Directive 73/23/EEC.

About DtiCorp.Com
DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000  HVAC products , including industrial, commercial and residential parts and equipment from Honeywell, Johnson Controls, Robertshaw, Jandy, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

For more information about Honeywell LG1093AA46 please visit: http://www.dticorp.com/catalog/honeywell-lg1093aa46-turbine-flame-sensor-p-160700.html

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Fort Lauderdale, FL -- (SBWIRE) -- 11/20/2013 -- Fort Lauderdale - DtiCorp.com ( http://www.DtiCorp.com ) is pleased to announce the availability of the updated Honeywell Low/Medium Torque Fire and Smoke Actuator . The updated actuator is a universal replacement for the existing Honeywell and competitor models. The primary technical specifications (Torque, Timing, Form Factor, etc.) remain unchanged, while new features have been added to enable reversible mounting orientation as well as the option to order with or without internal auxiliary switches.

The updated Fire and Smoke actuator simplifies the replacement process by offering the new time saving installation features as well as reducing the number of models needed by providing a universal replacement. Honeywell is the leading supplier of fire and smoke damper actuators designed for UL555 and UL555S.

Product Information

- Reversible design enables mounting for clockwise or counter-clockwise spring return with one model. This reduces ordering errors/confusion as well as simplifes the ability to stock inventory of a universal replacement.

- Optional internal end switches reduce the installation time and eliminates the need for an accessory auxiliary switch pack that was required in the past for confirming full open or full close of the actuator/damper. The overall price with switches is reduced when buying an actuator with internal end switches versus purchasing an actuator without end switches in addition to an accessory switch pack.

- Clip-in conduit connections have been added to the base of the actuator to simplify wiring and connection of flexible conduit. Installation time is reduced with the new conduit connections that require no tools or connectors to secure metal flexible conduit.

- Simplified shaft adapter enables fast, tight and secure connection to the damper shaft. The new shaft adapter is stronger than used previously and only requires two set screws for all models.

Applications

The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation. The fast drive and spring return time of 15 seconds make them suitable for building codes requiring fast timing.

Product Availability

Product is available now. Shipments are based on a 3-day service class.

Stocking Models

The following models are the most common for replacement stocking purposes:

- MS4104F1210 – 30 lb-in; 120 V; with switches

- MS4109F1210 – 80 lb-in; 120 V; with switches

- MS4120F1204 – 175 lb-in; 120 V; with switches (Existing high-torque model)

About DtiCorp.Com
DtiCorp.Com ( http://www.DtiCorp.com ) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Fort Lauderdale, FL -- (SBWIRE) -- 10/31/2013 -- Popular  online HVAC retailer DtiCorp.com ( http://www.DtiCorp.com ) is introducing the brand new  Honeywell R7247C1001 flame amplifier , dynamic self check for C7012E, F, 2-4 sec.FFRT for R4140, BC7000, R4075C, D, E, R4138C, D, FSP5075.  Solid state plug-in units respond to flame detector signal and indicate presence of flame.

Features:
- Use with BC7000; R4140; R4075C,D,E; R4138C,D Flame Safeguard controls and appropriate flame detector and FSP5075A1, FSP5075A3 Flame Amplifier Modules.

Specifications:

- Type: Rectification
- Flame Failure Response Time (sec): 2 to 4 sec
- Self Checking: Dynamic Self-Check
- Use With Primary Safety Control: R4140, BC7000, R4075C, D, E, R4138C, D, FSP5075
- Use With Flame Sensor - Gas, oil, coal: Ultraviolet Flame Sensor C7012E, F
- Approvals, Underwriters Laboratories Inc - Listed: File No. MP268, Guide No. MCCZ2
- Approvals, Canadian Standards Association - Certified: File No. LR1620, Guide No. 140-A-2
- Approvals, Control Safety Devices - Acceptable (CSD-1)
- Approvals, Swiss RE (formerly IRI) - Acceptable
- Approvals, Factory Mutual - Approved: Report No. 24181.01
- Color: Green

About DtiCorp.Com
DtiCorp.Com ( http://www.DtiCorp.com ) carries more than 35,000  HVAC products , including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

For more information about Honeywell R7247C1001 please visit: http://dticorp.com/catalog/honeywell-r7247c1001-flame-amplifier-p-36214.html

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Fort Lauderdale, FL -- (SBWIRE) -- 07/17/2013 -- Popular online HVAC retailer DtiCorp.com is introducing the LG1093AA45 Turbine Flame Sensor. Industrial power generation gas turbine installations demand the superior protection provided by the Honeywell UV Flame Monitoring System. The Honeywell flame monitor system detects the ultraviolet radiation emitted by a hydrocarbon flame and produces an output signal to indicate a flame or no-flame condition. This system has delivered proven performance on General Electric (and GE licensee) gas turbines for more than 35 years. Land-based and off-shore applications include power generation, pumping stations, shipboard power generation among other industrial uses. A variety of sensors types, amplifier types and sensor cable lengths are available.

Flame monitoring of a burner has comprised the use of thermocouples, expansion tubes, and radiation sensors. Due to the extremely high flame temperatures in process boilers, monitoring of boiler flames in large furnaces has been done mainly with remotely located radiation sensors or sonic microphone pickups, which detect the frequency of the flame.

Although the radiation sensor circumvents the problem of placing a sensor in the region of high flame temperature, it has shortcomings such as the inability to differentiate between flame radiation and radiation from the heated boiler or furnace wall regions. Thus, the flame may be extinguished and the flame detector will fail to respond. The fuel supply to the burners will continue to be discharged onto the hot furnace walls. This time lag between loss of flame and shut down of the fuel supply can cause an explosion.

There are specialized radiation sensors which sense ultraviolet radiation and others which generate signals corresponding to the amplitude of the high frequency flicker of the flame monitored. The sensors can distinguish between flame radiation and background radiation since both ultraviolet and flickering radiation find a source of excitation exclusively in the flame. The use of a flickering type radiation sensor produces an output signal that is continuously fluctuating. The fluctuation may be hard to distinguish, and the problem becomes one of accurate detection of this fluctuation.

Sensors are positioned to converge and the radiation magnitude received by the individual sensors is similar. A circuit means subtracts the output signals of the individual sensors of the pair, the steady and slowly varying components of flame radiation from the flame are effectively canceled leaving the rapidly varying difference signal for flame detection. The high frequency flame flickering is due to random pulses or burst of radiation from very localized sources in the flame, and there will always be a residual, varying component from the dual sensor system as long as the flame is present.

Features:

- High sensitivity with fast response time (0.1 sec typical)
- Amplifiers support multiple voltage requirements: 28 Vdc, 20-35 Vdc, and 115 Vac.
- Operating distances up to 1000 feet, sensor to amplifier.
- Available with Factory Mutual approval for explosive atmospheres.
- Available with European Directive CE mark for EMC 89/336/EEC, LVD 73/23/EEC and ATEX Explosive Atmosphere 94/9/EC.
- Qualified component on General Electric turbines.

Specifications:

- Geiger Mueller-type sensor phototube. Detects ultra-violet band and 1800 – 2600 angstroms. - "Solar blind" and tolerant to black body radiation.
- Two-year shelf-line, 10,000 hours MTBF with over one billion operating hours.
- Mounting Interface: 3/4 inch internal NPT.
- Control Panel Connection: Teflon shielded cable with one inch external conduit thread.
- Operating Temperature: -40°F to +350°F.
- Window Pressure Rating: 150 psig at 400°F.
- Special Certifications:
- Factory Mutual: Explosion Proof Class I, Divisions 1 and 2, Groups B, C and D
- CE Mark: EMC Directive 89/336/EEC, ATEX Directive 94/9/EC, II 2G, EEx d IIA T3 or EEx d IIC T3 Models AA34/35/36/44/45/46
- Cable Lengths:
- AA24/AA34: 16ft (4.9m)
- AA25/AA35: 42ft (12.8m)
- AA26/AA36: 61ft (18.6)

About DtiCorp.Com
DtiCorp.Com ( http://www.DtiCorp.com ) carries more than 35,000 HVAC products , including industrial, commercial and residential parts and equipment from Honeywell, Johnson Controls, Robertshaw, Jandy, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

For more information about LG1093AA45 Turbine Flame Sensor please visit: http://dticorp.com/catalog/honeywell-lg1093aa45-turbine-flame-sensor-p-1006.html

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Dania Beach, FL -- (SBWIRE) -- 06/04/2013 -- Popular online HVAC retailer DtiCorp.com ( http://www.DtiCorp.com ) is introducing the new Honeywell AM101-US-1 3/4 in Sweat Union Mixing Valves. Honeywell AM-1 series adjusts, maintains, and limits the hot water temperature settings to provide comfort and protect equipment at home. While increasing the amount of safe, usable hot water, it efficiently offers anti-scald, anti-chill protection.

Features

- Features dual purpose mixing or diverting values
- Offers constant water temperature under changing operating conditions
- Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
- Provides reliable performance at minimum flow of 05 gpm and proportional valve for simultaneous control of hot and cold
- Maximum pressure 150psi and maximum temperature of 212 F (100C)
- Tamper-resistant design with nickel-plated brass construction and EPDM O-rings
- Designed for easy maintenance and Teflon® coating prevents mineral build-up and extends life
- Lead free products have products numbers end in LF

Product Specifications

- Applications: Heat Pump Systems, Domestic water, Nursing homes, Public facilities, Automatic faucets, Radiant floor heating, Space heating, Combo systems, Solar hot water, Greenhouses, Industrial applications , Photo processing

- Connection Type: Union Sweat
- Pipe Size (inch): 3/4 in.
- Operating Temperature Range (F): 100 F to 145 F
- Operating Temperature Range (C): 38 C to 63 C
- Capacity (Cv): 3.9 Cv
- ASSE: 1017

About DtiCorp.Com
DtiCorp.Com ( http://www.DtiCorp.com ) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Controls, Robertshaw, Jandy, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

For more information about Honeywell AM101-US-1 please visit: http://youtu.be/7QC98XEwuDs  and  http://dticorp.com/catalog/honeywell-am101us1-34-inch-sweat-union-mixing-valves-p-5004.html

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Dania Beach, FL -- (SBWIRE) -- 08/10/2012 -- Leading HVAC online retailer DtiCorp.com (http://www.DtiCorp.com) is proud to announce the introduction of the brand new Honeywell TH8320WF1029 Premier White Universal Programmable Thermostat with automatic/manual changeover and up to 3 Heat/2 Cool stages for heating and cooling systems, Wi-Fi Internet Connected VisionPRO Thermostat.  The newest and most advanced Honeywell thermostat, the new Honeywell TH8320WF1029 connects to your home's Wi-Fi network so you can control it via your smartphone, tablet or computer anytime from anywhere in the world. Away on vacation? Check in on your home with the included free smartphone app. Working late? Delay your furnace or air conditioner's start time and save energy.

Features:

- Connect to the Internet to monitor and control your heating/cooling system
- View and change your heating/cooling system settings
- View and set temperature and schedules
- Receive alerts via email and get automatic upgrades
- Smart Response Technology
- Compressor protection
- Heat/cool auto changeover

Honeywell TH8320WF1029 Specification:

- Wi-Fi enabled for remote access from anywhere
- Free app gives you control of your thermostat settings.
- Free mobile app for remote thermostat control.
- Available for Android (https://play.google.com/store/apps/details?id=com.honeywell.mobile.android.totalComfort&hl=en) or iOS (http://itunes.apple.com/us/app/total-connect-comfort/id469517819?mt=8)
- Manage multiple thermostats at various locations
- High/Low temperature alerts via email, phone or web
- View local weather from your app
- Large touchscreen display
- Easy to install and program
- Automatic software updates
- Precise temperature accuracy +/- 1F
- The ultimate in comfort and control

Note: The Wi-Fi thermostat requires a C wire to operate. The C, or common, wire brings 24 VAC power to the thermostat. Many older mechanical or battery operated thermostats do not require a C wire. If you don't have a C wire, try:

- Looking for an unused wire that is pushed into the wall. Connect that wire to C and check that it is connected to the 24 VAC common at your heating/cooling system. Check the video section at wifithermostat.com.
- Installing a new wire. If required, contact a contractor to install a new wire.

This thermostat is pre-set with energy-saving program settings for four time periods. Using the default settings can reduce your heating/cooling expenses by as much as 33% if used as directed. Savings may vary depending on geographic region and usage.

About DtiCorp.com
As a Honeywell authorized distributor, DtiCorp.com (http://www.DtiCorp.com) sells HVAC products at a competitive price, and we are keeping in stock over 35,000 models of Honeywell thermostats, flame safeguard controls, burner sequence controllers, UV/IR flame detectors, flame signal amplifiers, modutrol motors, pressure switches, limit controllers, ignition transformers, gas solenoid valves, gas safety shut-off valves and high quality HVAC equipment and supplies.

For more information about Honeywell TH8320WF1029 please visit:

http://dticorp.com/catalog/honeywell-th8320wf1029-wifi-visionpro-programmable-thermostat-p-160648.html

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm