In 2010, the global demand for powder coating had tremendously increase even up until today when developments have been made to create new formulation, equipment and formulation process.

Sacramento, CA -- (SBWIRE) -- 11/17/2014 -- Powder coating paint is an innovative way of colouring thousands of products that are of use every day. It can protect vast varieties of products from household items to the toughest industrial machineries. It has been very popular since its introduction in North America some 40 years ago. Comparing to conventional paint, powder coating does not require a use of solvent to keep the binder in liquid suspension form.

Over the years powder coating paint had been used to almost 15% of industrial finishing market and is used in a variety of products whether industrial or at home. Most companies use powder coating since it gives good quality and durable finish which results to capitalized production and environmental compliance.

Here are some of the reasons why it is much better to use powder coating paint than ordinary conventional paint:

1 – Environmental: Powder coating emit zero or near zero VCO or Volatile Organic Compounds. During application, Powder coating paint does not harm the environment since it does not use any solvent. The waste produced by powder coating are also not considered to be hazardous chemicals and does not block drainage systems and may be disposed in the landfill. Conventional paints on the other hand, contains solvents and other harmful chemicals which are exhausted in the ozone layer and produces hazardous wastes which take effort to be disposed of in a manner which suits the environment.

2 – Economics (Productivity and Cost): Overspray of powder coating can be recycled 100% of the time. Powder coating has an average transfer efficiency of 60 to 70 per cent thus any overspray can be re-used which results to no wasted product. Liquid paints on the other hand, has an average transfer efficiency of only 30 to 35 per cent, thus half of the product is basically wasted because once the product evaporates, there is no way of re-using it. Also, the base product of powder coating paint is more affordable compared to conventional liquid paints. Powder coating paints are also ready to use. Unlike conventional liquid paint, powder coating does not require stirring, mixing or thinning. Powder is also far easier to apply than wet paint and requires less space compared to other liquid coating equipment.

3 – Mechanical: Powder coating paint produces double the thickness of a standard paint coating. It is flexible in that it can easily bend and yield with the material it is applied to. Powder coating paint is best used in painting transportation machineries because of its flexibility which will allow the machines to move and twist as it transports from one place to another. Powder coat also endures rock chips and other common road damages.

4 – Production: The powder coated product can be ready to be put to work in around 20 minutes unlike conventional liquid paints which takes days to dry. In terms of production efficiency, powder coating paint has been a necessary product to use because of the less waste over spray and less risk for defects and runs.

5 – Technical: Powder coating paint had shown resistance in corrosion. More and more industries use it because it protects machineries from gradual destruction due to chemical reaction. It is also good in resisting abrasion, acids and other solvents. Powder coating paint also has good insulation capabilities making it the highest standard of paint in the market today.

Powder coating is high-quality finish found in most household and industrial product every day. In 2010, the global demand for powder coating had tremendously increase even up until today when developments have been made to create new formulation, equipment and formulation process. The use of powder coating paint had helped numerous industries. There are even others exploring ways on how to take advantage of powder coat on their respective industries for economic and industrial growth.

About Pro Powder and Abrasive Supply
Pro Powder and Abrasive Supply is the one-stop powder coating equipments and parts shop. Pro Powder and Abrasive Supply understands what a successful coating business is. That's why what's important to their customers is important to them. Their products are stored in a climate controlled environment to ensure that the powders are in the top-of-the-line quality. Customers are assured that the powders are all brand new and newer surplus. Pro Powder and Abrasive Supply also has a team of knowledgeable and friendly customer support to assist their customers.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Powder coating, from its root word is a kind of paint in powder form. This kind of paint is produced by pulverizing a combination of resins, pigments and curatives among others to come up with a powder and is then applied to a surface that needs to be coated.

Sacramento, CA -- (SBWIRE) -- 09/30/2014 -- Human beings are given the gift of sight to see and appreciate nature's colors. Man has been painting and coloring things using different mixtures of rock and plant dyes.

Along with modernization, the way man paint evolved. Nowadays, there are various ways of painting or coating a surface which range from the conventional acrylic brush paint to modernized refined electrostatic powder coatings.

Powder coating, from its root word is a kind of paint in powder form. This kind of paint is produced by pulverizing a combination of resins, pigments and curatives among others to come up with a powder and is then applied to a surface that needs to be coated. The surface will then go through a heating process using an oven which will dissolve the powder and will give the surface an even glossy, metallic finish.

There are a lot of equipments that can be used to spray powder coatings depending on the requisite of application and the surface that needs to be coated. Electrostatic spray, fluidized bed, electrostatic fluidized bed, and powder curing are the most common method used to apply powder coating.

Powder coatings have a lot of edge over the traditional liquid paints such us high quality finish, higher resistance to corrosion, chipping and abrasion, and protection from chemicals, moisture and heat. Additionally, powder coatings are free from hazardous solvents resulting to insignificant discharges of volatile organic compounds (VOC) making the product environmental friendly. This results for organizations like the EPA and REACHES to promote powder coatings over the conventional materials.

Powder coatings are frequently applied on consumer goods, automotive, architecture, and general industry where the demand for superior quality products is pretty high. Consumer goods rose as the leading application segment comprising 22.1% of the total market volume in 2013. Though automotive is expected to be the fastest application segment for powder coating with an estimated 7.7% Compound Annual Growth Rate (CAGR) from 2014 to 2020.

Powder coatings are on a roll and are experiencing rapid market growth in automotive industry asa result of increased focus on external aesthetics of deluxe and high end cars. The growing industry of automotive in the Asia Pacific region together with the increasing spending power of the neighboring regions results in the growing demand for high end luxury cars. Thus, the demand for powder coatings increases as well. It is not advisable to apply powder coating on thin surfaces for there are chances that they will shed off due to high curing temperature. The application of powder coatings on furniture is yet to be discovered and found out if it is possible.

Having the numerous advantages over the traditional liquid paint, the demand for powder coating supplies it is expected to have the most rapid market growth in the coming years.

About Pro Powder and Abrasive Supply
Pro Powder and Abrasive Supply is the one-stop powder coating equipments and parts shop. Pro Powder and Abrasive Supply understands what a successful coating business is. That's why what's important to their customers is important to them. Their products are stored in a climate controlled environment to ensure that the powders are in the top-of-the-line quality. Customers are assured that the powders are all brand new and newer surplus. Pro Powder and Abrasive Supply also has a team of knowledgeable and friendly customer support to assist their customers.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

A lot of people are used to the liquid paints which have been around the market since time immemorial. Though a lot of these undergone innovations to make it environment friendly, still the majorities of liquid paints contains harmful solvents and emit volatile compounds which may bring adverse effects to the human body. This gives the powder coating paints the opportunity to shine in the paint industry.

Sacramento, CA -- (SBWIRE) -- 08/04/2014 -- Through a powder coating equipment, paints in powder form are sprayed to a metal surface which is heated in an oven afterwards for the hue to stay intact. The use of these paints lessens the use of mineral spirits and hydrocarbon thinners used in conventional paints. The aromatic hydrocarbon thinners are toxic in nature and can cause both short term and long term hazard to the environment and a lot of health risks as well.

Powder coating paints' advantage over the traditional liquid paints leads to a high demand and is expected to reach a market value of $12.48 billion dollars by 2020. Growing support for the use of powder coatings in comparison to conventional liquid paints by regulatory agencies such as EPA and REACH on account of negligible VOC (volatile organic compounds) emissions is expected to be a key driver for market growth. In addition, increasing application demand with regards to automotive, appliances and consumer goods is also expected to coerce powder coating sales over the next six years.

The largest application market for powder coating is the consumer goods that reached an estimated consumption of 437.3 kilo tons last year. Automotive and general industries were the key application markets with expected combined sales that may reach $5.11 billion dollars by 2020. In the furniture industry, the demand for powder coating is rather small last year but is expected to have a significant growth of 7.6% this year through 2020.

Pro Powder and Abrasive supplies is one of the rising players in the industry of powder coating. Pro Powder and Abrasive Supply is the one-stop-shop for one's powder coating needs. With a wide range of colors and finishes to choose from and the complete set powder coating equipments and a very courteous customer support no customer will be left unsatisfied. Their powder coating equipment like powder coating guns, powder coating ovens and powder spray booths can also be leased if one wishes to do his own powder coating activity.

About Pro Powder and Abrasive Supply
Pro Powder and Abrasive Supply understands what makes a successful powder coating business. What is important to their clients and customers are also important to them. Here are some of their offerings, top of the line quality products, powder stored in a climate controlled environment, customers are given the assurance that their powders are always brand new, never surplus, a complete line of powder coating equipment and parts and a knowledgeable and friendly customer support.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

There are two types of oven that are used in curing powders used in powder coating paint. They vary widely in terms of the heating methods used.

Sacramento, CA -- (SBWIRE) -- 08/04/2014 -- When choosing an oven in curing powder coating, it is important to consider several factors such as the size of the product, width or thickness, composition, the amount of output that can be generated, the costs that will be incurred, and the type of powder that will be used in curing. Temperatures and time are two most critical factors to consider when it comes to curing powders.

Given a higher temperature, a limited exposure stage equates to lower temperature within certain confines. But it is imperative to note that it is the article temperature that is being considered when setting the curing temperature and not the emitter's air or panel temperature.

The need for an efficient production labor and minimal maintenance costs requires that the ovens that will be used for powder curing must be made fuel-efficient and there is a proficient way of recycling hot air. The temperature required in curing powder should be made within 3 degrees Celsius range of the specified temperature. It should be exactingly controlled within the given range. And the temperature indicating buttons should be visible in the path of the workpiece oven. When setting up a workpiece oven, it is critical that there is ample allowance for its probable extension and for other alterations that might be done in the type and workflow of the workpieces. Air velocity is another thing to consider. There should be enough air velocity within a forced convection that would not blow powder off nor move workpieces so powder coating will come into contact with each other during stoving. The acceptable air velocity is within one to two metres per second range.

There are two types of oven that are used in curing powders used in powder coating paint. They vary widely in terms of the heating methods used.

One type is the infrared oven which makes use of infra-red heat energy emitted by a hot body and transported in straight lines that cause the absorption of heat resulting to the rise in temperature. The use of infrared oven is advantageous in the sense that it produces a sharp rise in object temperature which causes the ratio of the heat transferred by radiation as compared to the convection that increases abruptly.

The other type is convection oven which is the most famous method of curing powder coating. In convection ovens, gas or oil-fired heaters are used to heat the air. The required temperature must be provided by the circulation of the heated air in an enclosed space. The powder coated pieces are then brought into this space where they absorb heat, reach the surrounding temperature and are held at this temperature for certain period of time.

When curing powder coating, it is crucial to consider the color of the output. Depending on the composition of the powder, light colors can reflect impartially more infra-red radiation and do not heat up as fast as the darker colors. In determining the maximum curing conditions, each powder coating must be carefully evaluated.

About Pro Powder and Abrasive Supply
Pro Powder and Abrasive Supply is the one-stop powder coating equipments and parts shop. Pro Powder and Abrasive Supply understands what a successful coating business is. That's why what's important to their customers is important to them. Their products are stored in a climate controlled environment to ensure that the powders are in the top-of-the-line quality. Customers are assured that the powders are all brand new and newer surplus. Pro Powder and Abrasive Supply also has a team of knowledgeable and friendly customer support to assist their customers.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Man is gifted with the sense of sight to see and experience the colors of the world. Since the ancient times, man has been coloring or painting things with the use of various combinations of plants and rock dyes.

Sacramento, CA -- (SBWIRE) -- 06/04/2014 -- There are now different ways of painting or coating a surface which range from the traditional acrylic brush paint to modernized sophisticated electrostatic powder coatings.

Powder coatings, from the word itself, are a type of paint in powder form. These are made by pulverizing a mixture of resins, pigments, and curatives among others to form a powder and are then sprayed to the surface that needs to be coated. The surface will then undergo a heating process through an oven which will melt the powder and will give the surface an even glossy, metallic finish.

There are various equipments used to spray powder coatings depending on the requirement of application and the surface that needs to be coated. Electrostatic spray, fluidized bed, electrostatic fluidized bed, and powder curing are the most common method used to apply powder coating.

There are a lot of advantages that powder coatings have over the conventional liquid paints such us high quality finish, higher resistance to corrosion, chipping and abrasion, and protection from chemicals, moisture, and heat. On top of this, powder coatings are solvents free resulting to insignificant discharges of volatile organic compounds (VOC) making the product environmental friendly. This results for organizations like the EPA and REACHES to promote powder coatings over the conventional materials.

Powder coatings are often applied on consumer goods, architecture, automotive, and general industry where the demand for superior quality products is pretty high. Consumer goods rose as the leading application segment comprising 22.1% of the total market volume in 2013. Though automotive is expected to be the fastest application segment for powder coating with an estimated 7.7% Compound Annual Growth Rate (CAGR) from 2014 to 2020.

Powder coatings are on a roll and are experiencing rapid growth in automotive industry due to the increased focus on external aesthetics of luxurious and high end cars. The growing industry of automotive in the Asia Pacific region tied with the bloating spending power of the regions result in the growing demand for high end luxury cars. Consequently, the demand for powder coatings increases as well. Powder coatings are not advised to be applied on thin surfaces as there are tendencies that they will peel off due to high curing temperature. The use of powder coatings on furniture is yet to be explored and found out if it is feasible.

Having the numerous advantages over the traditional liquid paint, it is expected to have the fastest growth in the coming years.

About Pro Powder and Abrasive Supply
Pro Powder and Abrasive Supply is the one-stop powder coating equipments and parts shop. Pro Powder and Abrasive Supply understands what a successful coating business is. That's why what's important to their customers is important to them. Their products are stored in a climate controlled environment to ensure that the powders are in the top-of-the-line quality. Customers are assured that the powders are all brand new and newer surplus. Pro Powder and Abrasive Supply also has a team of knowledgeable and friendly customer support to assist their customers.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm