Futura Lithium Corp. reports today that it has acquired an option to purchase a 90% interest in a property consisting of 18,586 hectares of lithium brine exploitation concessions that are within the Salar de Antofalla salt flat in Catamarca Province, Argentina.

Toronto, ON -- (ReleaseWire) -- 06/05/2023 -- The Salar de Antofalla contains ground owned by the world's largest lithium producer, Albermarle Corporation (NYSE: ALB). Albermarle's working operations are within the southern region of the salar. The Futura Lithium option is contained in the Northwest portion of the Salar de Antofalla.

The property is strategically located closely to known lithium resources including the Antofalla Project located 32 kilometers (km) to the south. The site is directly accessible by Provincial Highway 33 and close to other high quality regional infrastructure, local labour resources, rail and power generation.

The Option may be exercised within four years by making a total of USD $9.7 million in payments including a deposit of USD $800,00.00 within nine months and the first installment of USD $1,200,00.00 within the first twelve months of the agreement. Upon payment of the full Option Exercise Price, Futura Lithium Corp. will have earned a 90% interest in the site. The remaining 10% will remain in ownership of the local regional government.

In 2019, NHK 2000 Drilling Ltd. announced the results of 52 brine samples taken from just below the surface of the salar, with brine assays ranging from 360 ppm to 640 ppm lithium. Previous geophysical studies conducted by Li2000 Drilling Ltd. also demonstrate the basin, where sampled, is approximately 650 meters deep and that the prospective brine target is open and extends southward towards Albemarle's Antofalla property.

Futura Lithium Corp. will announce the board's decision on whether to exercise the option in the near future.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

installing a commercial chain link may be subject to different regulations and bylaws—here are practical tips on preparing.

New Westminster, BC -- (ReleaseWire) -- 12/14/2022 -- Installing a commercial chain link fence in Vancouver or anywhere is a reasonably significant project. Working with professionals, a company that can answer questions and provide guidance is a considerable benefit, but some tasks can be undertaken personally. For more, go to https://qsfencing.ca/blog/how-can-i-prepare-for-having-a-chain-link-fence-installed-check-out-5-practical-tips-for-this-moment/

Commercial chain link fences—or any fence—cannot be installed without planning. Sometimes, there may be regulations and bylaws mainly dedicated to safety. To streamline an installation, get started with these easy tips:

1. Confirm the Land Plan
If the goal is to delimit land, it's essential to know exactly where the chain link fence can be installed—what are the property limits? Don't guess--check directly with regulatory bodies to avoid a headache. If the fence is installed outside property boundaries, it may need to be adjusted, incurring unnecessary expenses later.

2. Pay Attention to Pipes
Gas, water, sewage—an upset can result in severe delay and expense. Ensure a thorough understanding of what's running under the property and where it's safe to dig, as professionals will need to install support posts along the entire perimeter.

3. Preliminary Clean-u
To speed up installation work, ensure the yard is clean and unobstructed to facilitate equipment transition. Perform regular site maintenance (mowing, twig removal, and keeping the site free of debris).

4. Mark Off-limits Areas
On the installation day, professionals will need to go through with materials and equipment to put the fence up. Make sure they know where they can safely work and if there are any areas to avoid for privacy or safety.

5. Alert Neighbors
If there are other neighbours, especially other businesses, courteously alert them about potential disruptions. They will be able to caution customers and implement workarounds and safety protocols. This also limits potential annoyance and un-neighbourly behaviour in the future.

Chain Link Fences in Vancouver
As a local fencing team, the professionals at QS Fencing in Vancouver can assist with complete chain link fence installation . Click here to request a quote or call all (604) 777-3057 to speak with a customer service representative.

About QS Fencing
Established in 2010, QS Fencing is a family-owned business that aims to provide quality products and superior service. It is a Vancouver residential and commercial fencing company that is licensed and insured. All employees are WCB insured as well. QS Fencing serves the geographical areas of Vancouver, West Vancouver, North Vancouver, Burnaby, New Westminster, Coquitlam, Port Coquitlam, Port Moody, Maple Ridge, Richmond, Surrey, and Delta, BC. To learn more, visit https://www.qsfencing.ca or call (604) 777-3057.

QS Fencing
Sebastien
(604) 777-3057
Company Website: https://www.qsfencing.ca

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Precision metal stamper and deep draw expert welcomes Anna Barden to the human resources team

Attleboro, MA -- (ReleaseWire) -- 11/02/2022 -- Larson Tool & Stamping Company is pleased to announce Anna Barden as its new Human Resources Manager.

Barden brings with her 10 years' experience working in human resources, primarily in the manufacturing sector. She has an undergraduate degree in management and economics from Providence College and received her MBA from Bryant University. During her career, Barden has implemented two HRIS platforms, helping to optimize the HR component for an overall better employee experience at all levels of the organization.

She has taken on several key safety roles alongside her human resources duties throughout her career. Of this, Barden states, "There is a synergy between safety initiatives and their function within human resources in general. Understanding this and making them integral parts of the work culture is an aspect of my job that I enjoy."

When asked about Barden's impact on the team, President Chuck Cederberg said, "She is filling the role left by her predecessor, Bill Jordan, who served this company very well during his fruitful career with Larson before retiring recently. We are grateful to him for working with Anna, helping to transition this role over to her seamlessly. Of course, this comes as no surprise, since one of Anna's strengths is process improvement, along with conflict resolution and risk mitigation. We are excited to have her with us and look forward to her long and successful career with Larson."

For more information on Larson Tool & Stamping Company, visit www.larsontool.com.

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Precision metal stamper, Larson Tool, to exhibit at Greenville trade show on November 9 and 10, 2022

Attleboro, MA -- (ReleaseWire) -- 10/21/2022 -- Larson Tool & Stamping Company will be exhibiting at the Design-2-Part trade show taking place on November 9 and 10 at the Greenville Convention Center in Greenville, SC. Representatives from Larson will be available at booth #257 to discuss the company's latest developments and capabilities.

"We are excited to exhibit at our third trade show since September," says Jim Lovetere, Southeast Territory Manager at Larson Tool & Stamping. "We've had a busy couple of months and we look forward to seeing what connections the Greenville show will bring."

For more information on Larson Tool & Stamping Company, visit www.larsontool.com.

For free registration to the Greenville show, click here.

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

delineate property boundaries, prevent unauthorized access, or act as perimeter security—chain link fences remain a practical solution for commercial applications

New Westminster, BC -- (ReleaseWire) -- 10/14/2022 -- Commercial chain link remains one of the most cost-effective and easiest installations available for businesses or industries that need a solid and lasting fence. The team at QS Fencing recently shared why there's no sitting on the fence when it comes to commercial chain link. For more, go to https://qsfencing.ca/chain-link-fence/

Since 2010, QS Fencing has collaborated with residential and commercial clients facing the challenge of making properties safer and more secure. As a team specializing in installing and repairing metal fences, chain link remains the undisputed champion of the commercial world, and there are many compelling reasons why.

What is a Chain Link Fence?

Chain link fences are made from interlocking metal mesh fitted between a metal frame. The fence is modular and easy to install. In many cases, it's as easy as connecting solid pieces of fencing to posts anchored into the ground, which means it can accommodate slight gradients. Businesses can also customize options like height, colour, and finish. Accessories like gates and razor wire can also be added to enhance security, making chain link a versatile choice for quickly securing property on a budget.

Affordable Chain Link Fences

Chain link offers distinct cost benefits compared to many other fencing materials—it's long-lasting and low maintenance competed to wood. Additionally, the price for materials and installation is lower than vinyl or aluminum.

Durable with Easy Care

Solid and durable, chain link fences are the epitome of low maintenance. In most cases, all that's required is cleaning and checking for damage each year. Chain link is galvanized coated, so it's resistant to rain, snow, and even hail. An optional coloured vinyl coating may be requested for a more customized look and additional resistance that offers a high return on investment.

Added Security

Chain link is an easy way to secure a site or property. It can prevent people from accessing dangerous areas and protect valuable equipment and machinery on site. For businesses, a chain link fence is a relatively simple security investment that can enhance property value and peace of mind by reducing the potential for accidents/theft.

Commercial Chain Link Fences in Vancouver

As a team that's installed commercial chain link across Vancouver, QS Fencing supports businesses and organizations looking for cost-effective fencing solutions for privacy, security, and safety. The team offers a hassle-free fence installation, emphasizing customer satisfaction, including competitive prices.

Call (604) 777-3057 to speak with a customer service rep about chain link fencing and get a project estimate today.

About QS Fencing
Established in 2010, QS Fencing is a family-owned business that aims to provide quality products and superior service. It is a Vancouver residential and commercial fencing company that is licensed and insured. All employees are WCB insured as well. QS Fencing serves the geographical areas of Vancouver, West Vancouver, North Vancouver, Burnaby, New Westminster, Coquitlam, Port Coquitlam, Port Moody, Maple Ridge, Richmond, Surrey, and Delta, BC. To learn more, visit https://www.qsfencing.ca or call (604) 777-3057.

QS Fencing
Sebastien
(604) 777-3057
Company Website: https://www.qsfencing.ca

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

EZ Reel by Electrical Cable Supply Ltd. simplifies large scale cable installation for electrical contractors in Vancouver

Vancouver, BC -- (ReleaseWire) -- 10/13/2022 -- The majority of commercial and industrial electrical contractors in Vancouver understand the struggle of getting larger cable reels to their location within a building. For greater ease, the new EZ Reel by Electrical Cable Supply Ltd. (ECS) is an innovative solution meant to simplify moving and installing large cable reels within a commercial or industrial building. For more, go to https://www.ecswire.com/en-us/News/EZReel.

Working with reels of larger gauge sizes requires special handling because of the increased weight and inability to turn on the flanges. Large reels are delivered to the job site on a pallet flipped on their side. Reaching the final installation location requires a forklift. If one is not available, the time required to relocate the cable to the installation area can quickly become costly.

As an experienced team supporting electrical contractors in Vancouver and across North America, ECS has created the EZ Reel. This all-in-one solution allows the reel to spin freely. These spinning cable reels are shipped on a pallet (upright on their flanges) so that one person can easily unpack and move them anywhere on the job site.

By incorporating an extra set of outer flanges with bearings attached to a standard wooden cable reel, EZ Reel's spin-on-a-dime action makes maneuvering hallways, corridors, and even elevators a breeze. No extra racking installations are required for unspooling and installation.
Details for Electrical Contactors:

- EZ Reel does not need to be purchased separately–it is available as an add-on option when purchasing cable
- A deposit may be required to ensure the EZ Reel get returned undamaged
- EZ Reel is compatible with any cable type or length
- Uncut, full cable reels directly from the manufacturer can be used and moved around the job site (install the same cable at different locations)
- Multiple cables and colours can be unspooled in parallel simultaneously
- Wheel chocks lock the outer spinning reel flanges at any angle for almost instant unspooling

EZ Reel can be added to any larger gauge cable. For electrical contractors in Vancouver who want to save effort, time, and money on sizable cable installations in a range of commercial and industrial applications, contact ECS at 604.276.9473 to learn more.

About ECS Electrical Cable Supply Ltd.
ECS Electrical Cable Supply Ltd. specializes in wire, cable, and related services for the Canadian and U.S. markets. We serve electrical contractors in Vancouver of all sizes, and with an agile and service-centric approach, we can easily accommodate the needs of our customers – from sourcing special materials to same-day deliveries. No order is too big or too small.

For more information, please visit https://www.ecswire.com/ or call 1.800.661.4165

ECS Electrical Cable Supply Ltd.
Kevin Chand
kchand@ecswire.com
604-276-9913

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Precision metal stamper, Larson Tool, to exhibit at second trade show this month on September 28 and 29, 2022

Attleboro, MA -- (ReleaseWire) -- 09/07/2022 -- Larson Tool & Stamping Company will be exhibiting at the Design-2-Part trade show taking place on September 28 and 29 at the Royal Plaza Trade Center in Marlborough, MA. Representatives from Larson will be available at booth #224 to discuss the company's latest developments and capabilities.

Design-2-Part is the largest design and contract manufacturing trade show in the U.S., bringing together parts and manufacturing service suppliers with prospective customers, OEMs, product manufacturers, and others in the industry. It provides a large forum for learning, networking, and demonstrations that help American companies maintain a leadership position in innovation and technology.

"September is an exciting month for us at Larson since we're attending both the Nashville show on September 14 and 15, as well as the Marlborough show on September 28 and 29," says Neil Fonger, Sales Manager at Larson Tool & Stamping. "We look forward to a jam-packed schedule for September and discussing all Larson has to offer with the Design-2-Part attendees."

For more information on Larson Tool & Stamping Company, visit www.larsontool.com.

For free registration to the Marlborough show, click here.

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Precision metal stamper, Larson Tool, to showcase capabilities at trade show on September 14 and 15, 2022

Attleboro, MA -- (ReleaseWire) -- 08/15/2022 -- Larson Tool & Stamping Company will be exhibiting at the Design-2-Part trade show taking place on September 14 and 15 at the Music City Center in Nashville, TN. Representatives from Larson will be available at booth #205 to discuss the company's latest developments and capabilities, as well as the status of the materials market discussed in a recent blog, "The Current State of Materials in Manufacturing."

"We're excited to be attending trade shows this year and are eager to see what Nashville will bring," says Jim Lovetere, Larson Tool & Stamping's Southeast Territory Manager. "I look forward to the opportunity to meet with customers and prospects, especially those in the Southeast territory that I have worked closely with before."

For more information on Larson Tool & Stamping Company, visit www.larsontool.com.

For free registration to the Nashville show, click here.

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Subject-matter experts offer insights on the highly specialized process of deep draw stamping.

Attleboro, MA -- (ReleaseWire) -- 02/28/2022 -- Larson Tool & Stamping recently published a new deep drawn stamping guide that features their proven knowledge on the subject of deep drawn stamping and serve as an aid to designing products to be manufactured by the deep draw process. The guide walks the reader through the process, the benefits, the anatomy of deep drawn stamping, and more, to best help project planning or finding the right metal stamping partner.

Deep draw is a highly specialized process in metal stamping, requiring properly equipped press equipment and engineering expertise, which Larson has amassed in its 100+ year-history as a leader in precision metal stamping, with a marked specialty in deep draw. The guide is published on Larson Tool & Stamping's website, as well as with Tech Briefs. The full table of contents for the deep draw stamping guide is as follows:

1. The Process
2. The Benefits
3. Anatomy of Deep Drawn Stamping
4. Specifying a Drawn Shell
5. Material Choices
6. Choosing a Deep Drawn Stamper
7. Summary
8. Deep Draw Case Study
9. Larson Tool Deep Drawn Stamping Services

Neil Fonger, Sales Manager at Larson Tool & Stamping, shared, "Our team at Larson believes it is important to share our company's many years of expertise on the subject of deep draw stamping. We have extensive legacy knowledge about deep draw and want to help others understand how to plan more effectively for their projects. Whether or not a reader has partnered with Larson, or plans to, we hope that they gain valuable insight from our new guide."

Click on this link to download the free deep drawn stamping guide. To learn more about Larson Tool & Stamping, visit www.larsontool.com.

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Gehret Wire Works of Philadelphia, PA continues operations through COVID-19 pandemic.

Philadelphia, PA -- (ReleaseWire) -- 12/24/2021 -- Around the globe, a resurgence of the second wave of COVID-19 cases is appearing that has the world on edge. Fortunately, many small businesses have managed to carry on further and learn from the initial surge of COVID-19 cases.

Gehret Wire Works of Philadelphia, PA has managed to remain strong throughout the pandemic by providing quality stainless steel wire mesh solutions for businesses all around the country to ensure their operations don't miss a beat.

"Our team at Gehret Wire Works takes a lot of pride in being able to help out our fellow small businesses and public installations in the area. As a vendor for many construction companies, we knew we had to maintain our capabilities not only for the sake of our business but for the sake of everyone within the community", stated owner Robley Ebert.

As the future may seem uncertain, manufacturing companies like Gehret Wire Works are a great light to see at the end of the tunnel.

About Gehret Wire Works
Gehret Wire Works is a custom metal fabrication company located in Philadelphia, PA that offers custom solutions for residential and commercial projects. Gehret Wire Works specializes in welding and molding ferrous metals into wire mesh partitions, cages, infill panels and sheets. In 1944, the business started when Robley's father, Robley James acquired the company after working at its predecessor in Bridgeport, PA. Gehret Wire Works is proud to be a small family-owned business that prides itself on innovation, accountability and quality.

Learn more about Gehret Wire Works and how they are helping their local community at https://gehretwire.com

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Precision metal stamper and deep draw expert welcomes Sharon Costa to the quality assurance team.

Attleboro, MA -- (ReleaseWire) -- 03/02/2021 -- Larson Tool & Stamping Company is pleased to announce Sharon Costa as its new Quality Control Manager.

Costa comes toLarson with 20-plus years of experience in quality assurance. She holds a bachelor's degree in project management, is an ASQ Certified Quality Auditor, and holds a VDA Process Auditor certification. With vast experience in quality standards for precision machining manufacturers working with medical device companies, Costa bring her strict ISO 13485 sensibilities to Larson. Sharon will be responsible for the quality management systems and regulations, and provides integral support to improve processes and product quality at Larson.

When asked about what she enjoys the most about joining Larson, Costa said, "I have worked for solid, well-run organizations in the past; I am very impressed with how many department owners and leads at Larson take ownership of their responsibilities, ensuring that people are properly trained, empowered, and equipped to do their jobs—not leaving 'loose ends' to be fixed by the quality manager. Process managers take their jobs seriously and people are accountable for their work. Having such cohesive vision and follow-through allows us to produce the top-quality components we are known for."

President Chuck Cederberg said of Costa joining the team, "Sharon understands process implicitly and uses that knowledge to improve it with added efficiency. We run a lean operation and Sharon is a great fit. Having a new set of eyes always brings vision to help us update and streamline functions that may have been overlooked, such as reducing the amount of paperwork with our documentation protocols, while still maintain accuracy and accountability. We're glad to bring another woman onto the team and welcome her input and perspective as we forge forward."

For more information on Larson Tool & Stamping Company, visit www.larsontool.com.

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Misti Armstrong, Customer Service Representative at Larson Tool & Stamping, is recognized in notable 2020 lineup of women in manufacturing

Attleboro, MA -- (ReleaseWire) -- 12/07/2020 -- MetalForming Magazine recently released its 2020 list of Women of Excellence in Metal Forming & Fabricating and Larson is pleased to announce that Misti Armstrong, a Customer Service Representative with 25 years tenure at Larson Tool & Stamping has made honorable mention within an impressive group of women recognized in this year's esteemed choices.

This is the fifth year that MetalForming Magazine, in conjunction with the Precision Metalforming Association (PMA) and with the support of the Women in Manufacturing Association (WiM), have awarded these distinctions that honor the accomplishments of women in the metal forming and fabricating industry. According to the article announcing the results, the selection process was difficult, as there was a "staggering amount" of entries—testament to the impressive talent of females in the manufacturing sector. Brad Kuvin, MetalForming editorial director, said, "The 2020 class, like those of the previous four years, represents the best of the best, and provides excellent examples and inspiration for those who may follow in their footsteps."

The nomination process included submitting details that represent leadership and accomplishment of the respective nominees in the metalforming industry. Brad Hankin, Larson's Customer Service Manager who nominated Armstrong, spoke of her perseverance, dedication, attention to detail, and ability to mediate collaboration between customers and production staff—a pivotal skill for any customer-facing role. She began her career with Larson as a part-time employee purchasing assistant 25 years ago. In her role, she had always been recognized for her willingness to learn, help others, along with her organizational skills. These qualities earned her a spot in Customer Service when the opening became available. A quick learner and initiator—taking on responsibilities that include keeping Larson's KAN-BAN system organized and functional—Armstrong continues to provide invaluable assistance to purchasing and excellent service to customers.

Among her strongest characteristics are her interpersonal skills—"everyone wants to work with Misti," said Hankin. Armstrong holds a wealth of information about the company and willingly shares it with stakeholder to help get things done. She is well respected by all levels of Larson's organization and interacts with leads and operators on the floor daily, with ease. She treats her internal customers with the same level of respect and attention as she does customers.

Hankin said of her work ethic, "No detail is too big or too small for her. If you need to know where something is, you can ask Misti and she will know, even if it is something used only occasionally. No matter the project, she jumps in with no hesitation to ensure things are successful. Misti is a dependable independent worker while also being a conscientious team member—always focused on the company's success as the goal. And all of that contributes to the ultimate success of our customers. We are thrilled that her commitment to excellence has been recognized by industry icons, putting her in exceptional company. We are grateful to Misti for her years of commitment and congratulate her on this accomplishment."

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on Larson Tool & Stamping Company, visit www.larsontool.com.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Precision metal stamper invests in lean re-design and update of tooling department to further optimize quality, production, and time to market for customers

Attleboro, MA -- (ReleaseWire) -- 11/24/2020 -- Larson Tool & Stamping Company in Attleboro, MA is celebrating 100 years in the tool and stamping business. Founder Nils Larson started the company in 1920 with patented products based on the metal stamping process. As America entered WW II, Larson produced hardware and components to support U.S. troops overseas. After the war it produced innovative products for the consumer and automotive markets. Later, Larson went on to become pioneers in deep drawn stampings. The Larson family, now in its fifth generation, has always had an engineering focus, developing and adopting new technologies in pursuit of excellence in metal stamping and tool building.

This year, to better serve its customers' needs, Larson is investing more than $200K to update and expand its tooling department. As part of its on-going lean manufacturing efforts, Larson has repurposed over 1,500 square feet, increasing its tooling facility. Larson is using lean principles to consolidate work-flow processes and machinery, automate machining processes, and organize work-in-process and material storage.

Manny Resendes, Larson's Engineering Manager, started with fresh ideas, re-thinking the entire tool building process. He worked closely with his team of engineers, toolmakers, and technicians to map out each process and create flow diagrams for each step of the tool design and build process. Under his direction, Larson's engineering staff has refocused their design process, starting with process design and development through try-out and process qualification, and is working closely with their technicians and programmers to bring their designs to the build process sooner. Larson has also made a capital investment in additional high-speed CNC machining centers and has hired CNC programmer/operators and technicians to focus on making fabrication and assembly processes faster and more efficient.

Although many companies apply their ISO 9001 quality management system (QMS) to control quality of their final product and production processes, the QMS is not always applied to support processes such as tool design and building. Resendes has developed a quality assurance system modeled after Larson's ISO 9001:2015 QMS, using Larson's risk management principles. These are specifically tailored to the tool-build process to minimize error, while bringing designs to completion faster and more accurately.

Resendes said, "My goal is to combine Larson's rich history of innovation and metal forming skill with today's technology, ISO 9001 processes, and lean principles to create a process that is faster, more accurate, and meets or exceed our customers' expectations. We have the best group of people to achieve these goals, and I'm really excited about the possibilities for Larson."

Larson's aim is to benefit its customers by saving time and money, helping bring customers' products to market sooner, and building reliable, quality-driven processes to meet its customers' production requirements in the long term.

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on Larson Tool & Stamping Company, visit www.larsontool.com.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Brand Technologies manufactures high-grade oil, clean fiberglass and valuable gravel. The waste-free, environmentally friendly process reuses formerly toxic asphalt shingles as feedstock.

Florence, CO -- (ReleaseWire) -- 08/19/2020 -- Brand Technologies manufactures high-grade oil, clean fiberglass and valuable gravel. The waste-free, environmentally friendly process reuses formerly toxic asphalt shingles as feedstock.

Every year, nearly 11 million tons of asphalt shingles are deposited in landfills across the United States. Asphalt shingles in landfills may leach toxic substances into groundwater, causing health problems like cancer. There is no benefit in disposing of asphalt shingles in landfills.

Brand Technologies has developed a proprietary process that remanufactures asphalt shingles into their base substances: oil, fiberglass and aggregate. Each ton of asphalt shingles produces over 2 barrels of oil, nearly a yard of aggregate gravel, and 600+ fiberglass pieces. For the 11 million wasted tons of shingles produced each year, Brand Technologies estimates that 22 million barrels of oil, 8.25 million tons of aggregate, and 7.4 billion pieces of clean fiberglass can be manufactured.

The process to manufacture oil from shingles benefits the environment. Today, the vast majority of post-consumer shingles are placed in landfills. By remanufacturing these shingles into new products our environment and ground water are protected from the long-term impact of the shingle waste. Roofing contractors benefit by having an environmentally friendly and cost neutral option to eliminate used shingles. Finally, remanufacturing useful materials from would-be trash also produces jobs and economic growth in communities.

Howard Brand founder of Brand Technologies notes: "We are the first company to completely remanufacture asphalt shingles into highly valuable products. We have saved thousands of barrels of oil from seeping into the ground in landfills using our sustainable and proprietary processes. We are excited and humbled to improve our environment by remanufacturing post-consumer asphalt shingles."

About Brand Technologies
Brand Technologies in Colorado (BrandTECH) was formed in 2017 to benefit the lives of people, the economy, and the environment.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Larson continues with fifth-generation family legacy as it welcomes Andrew Larson as its latest metal stamping team member

Attleboro, MA -- (ReleaseWire) -- 05/21/2020 -- Larson Tool & Stamping Company is pleased to announce Andrew Larson as its new Production Manager.

Andrew graduated from Roger Williams University with a degree in finance and focus on business development. He spent his summer breaks working with the team at Larson Tool in a variety of areas. His solid cross-section of experience during his time on the production floor helped focus his desire to ultimately be a part of the family business.

Prior to starting as Production Manager at Larson Tool in December of 2019, Andrew worked outside of the industry for several years, as he felt it was important to see how other companies operate. Working in finance, customer-service, and management he gained skills that translate well to Larson Tool's customer-centric philosophies. He developed skills in building teams, fostering collaboration, and business development. His combined experience working at Larson Tool as well as other organizations enables him to bring best practices together to meet the needs of his customers.

When asked about beginning his career at Larson Tool, Andrew said, "It is a great time to be coming aboard as Larson Tool celebrates 100 years of business, something our entire team is very proud of. I am looking forward to bringing my experience to the table and blending it with our developed processes to keep up our mission of providing quality products and services to our customers. We're focused on continuous improvement: working efficiently and remaining contemporary, a tradition I am excited to continue."

Ray Niquette, Jr., VP at Larson, said of Larson, "It is great to have Andrew aboard and nice knowing the next generation is getting involved! He's been able to get up to speed really quickly and has a great feel for the customer base. He brings a new perspective that will pave the way for growth in the future."

For more information on Larson Tool & Stamping Company, visit http://www.larsontool.com. 

About Larson Tool & Stamping Company
Since its inception in 1920 in Attleboro, MA, Larson Tool & Stamping Company has been making a difference as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Precision Metalforming Experts Achieve Impressive Milestone!

Attleboro, MA -- (ReleaseWire) -- 03/16/2020 -- Attleboro, MA – 3/16/2020 – Larson Tool & Stamping Company, a precision metalforming manufacture, is celebrating 100 years in the metal stamping industry this month. Nils G. Larson and C.W. Cederberg, two immigrants with skillsets as apprentice blacksmiths, came to America to find opportunity. On March 15, 1920, tool room machinery and power presses were being installed at the renovated the Attleboro, MA facility as the two founders of Larson Tool awaited granting of their charter from the Commonwealth of Massachusetts. Larson and Cederberg were well on their way to fulfilling their plan to establish a company dedicated to the manufacture of metal stampings, assemblies, tools, and special machinery. Some of the early accomplishments that Larson has to its credit involve the development and patented ratchet wrench—of which Larson did the first stamping—that contributed to the sale of socket wrench sets, as well as the reinforcement clips for D-type shovel handles and the Larson Ford valve filter.

In the century since then, Larson has led with innovation, quality, service, and customers as their core focus, and has grown in size and reputation to become a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Known for its proprietary deep draw expertise, Larson's fully integrated services and capabilities span a wide range and also include forming, stamping, assembly, brazing, painting, coining, and more, allowing Larson to provide high-quality, cost-effective solutions. Just recently, Larson added state-of-the-art, large capacity press equipment, another CNC machining center, and a new CNC screw machine to its production floor.

Plans to celebrate this impressive milestone include a private party, showing appreciation to the dedicated employees who have helped Larson achieve this longevity. The range of diversity in Larson's abilities have spanned many industries over the years. Industries served include automotive, industrial and consumer hardware, hand and power tools, computer and electronics, fire safety and security, and architecture. Larson also proudly supplied parts to the U.S. Armed Forces during World War II, and continues to produce components and assemblies for military applications.

Larson Tool President, Chuck Cederberg, said, "To say I am proud that Larson has achieved this milestone doesn't quite convey it well enough. It took vision, innovation, and commitment—bordering on sacrifice many times—to bring Larson to fruition and nurture it to the growth and reputation we enjoy today. We are so appreciative of the workforce and our customers who have continued to choose us to partner with for everyone's combined success. We have always believed in re-investing in our people and the technology, which has proven to create quality products and solidify all our relationships through the years. We are very grateful to everyone who has contributed to our longevity and accomplishments and are thrilled to celebrate this anniversary with them and on their behalf."

For more information about Larson Tool & Stamping, visit www.larsontool.com or call (508) 222-0897.

About Larson Tool
Larson Tool & Stamping is based in Attleboro, MA and is a trusted supplier of precision metal stamping parts and components to a wide number of industries in the United States. Larson's innovative and highly specialized capabilities range from complex progressive die stampings and deep drawn cylinders to value-added, forming, welding, and assembly operations.

Larson Tool specializes in deep drawn components and offers many full-service solutions. The combination of having a dedicated workforce, state-of-the-art metal stamping facility, and control of all in-house processes enables Larson Tool to meet delivery schedules with the highest quality metal stamping products at competitive pricing.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

DPSI is recognized as a Market Leader in the CMMS category for the Winter 2020 Customer Success Report published by FeaturedCustomers.

Greensboro, NC -- (ReleaseWire) -- 02/19/2020 -- DPSI has been named a Market Leader in the Maintenance Management Software (CMMS) category for the Winter 2020 Customer Success Report published by FeaturedCustomers. FeaturedCustomers is the leading customer success content marketing platform for B2B business software & services helping potential B2B buyers make informed purchasing decisions through vendor validated customer success content such as customer testimonials, success stories, case studies, and customer videos.

FeaturedCustomers evaluated all the potential Maintenance Management Software (CMMS) companies on its platform for possible inclusion in the report. Only 27 companies met the criteria needed for being included in the Winter 2020 Maintenance Management Software (CMMS) Customer Success Report. DPSI earned a Market Leader award in the category.

The Customer Success Report is based on the curation of authenticated case studies, testimonials, and videos from across the web, telling a complete story of vendors in the Maintenance Management Software (CMMS) space through real customer experiences. Rankings are determined by multiple factors including total number of customer success content, social media and market presence, vendor momentum based on web traffic and search trends, and additional data aggregated from online sources and media properties.

Market Leader – The Market Leader designation is awarded to vendors with substantial customer base & market share and enough customer success content to validate their vision. Leaders have the highest ratio of customer success content, content quality score, and social media presence relative to company size. Highly rated by customers, DPSI consistently publishes high quality, vendor produced customer success content and curates quality customer references from multiple third-party sites.

The full report, along with DPSI's profile, is available for you to download here:

https://www.featuredcustomers.com/vendor/dpsi-imaint

"DPSI is proud to be named a Market Leader in the CMMS category for 2020. This distinction from FeaturedCustomers truly aligns with our goal of providing excellent customer support," says Carol Owens, DPSI President.

About DPSI
Since 1986, DPSI has provided industry-leading computerized maintenance management systems (CMMS) and enterprise asset management (EAM) software for over 6,000 companies and 50,000 users in over 50 countries. DPSI offers on-premise, cloud-hosted and mobile solutions to help companies centralize data, automate maintenance management tasks and enhance productivity. With easy-to-use software such as iMaint and PMC, users can streamline work orders, preventive maintenance, scheduling, reporting and more. DPSI partners with companies, regardless of size, industry or unique set of maintenance challenges, to maximize ROI and ensure long-term success.

About FeaturedCustomers
FeaturedCustomers, the world's only customer reference platform for B2B business software & services, helps potential B2B buyers research and discover business software & services through vendor validated customer reference content such as customer testimonials, success stories, case studies, and customer videos. Every day their platform helps influence the purchasing decisions of thousands of B2B buyers in the final stages of their buying cycle from Fortune 500 companies to SMB's. For more information, visit the FeaturedCustomers website.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Zhejiang, China -- (ReleaseWire) -- 11/17/2019 -- Kcm Special Steel Co.,Ltd is a professional supplier and manufacturer of large, medium and small diameter stainless steel welded and seamless pipes. It has a production area of 22,000 square meters and a solid capital base. It specializes in producing all kinds of stainless steel pipes with complete specifications and quality first. The company has excellent equipment and complete product range.

The product specifications are: 6mm--2000mm×1mm--60mm. The company implements total quality management, establishes a modern quality management system and introduces foreign advanced technology, adopts international advanced production technology, and its products are widely used in petroleum, chemical, machinery, electric power, chemical fiber, pharmaceutical, paper, printing and dyeing, food, pneumatic components and other industries.

Testing equipment, product implementation technical standards: stainless steel seamless pipe for fluid transportation GB/T14976-02 (national standard) stainless steel seamless pipe for structure GB/T14975-02 (national standard) stainless steel seamless steel pipe for boiler and heat exchanger GB13296 -91 (national standard) The corresponding foreign standards are: American ASTM/ASME, EN, DIN, GOST,JIS etc. The main steel grades are:201, 202, 301, 304, 304L, 310S, 316, 316L, 316Ti, 317, 317L, 321, 347,904L Duplex SS, S31803 / 2205, S32750 / 2507 , S32760 Monel400 Inconel600 Incoloy800 Alloy20 Alloy28 Nickel Alloy etc. Special specifications and materials can be customized!

Based on the tenet of "Quality First, Customer Supreme", the company sincerely hopes to cooperate closely with all customers and colleagues to create a bright future with honesty, flexible operation and satisfactory service.

It is a successfully year in 2019, Kcm Special Steel has sold out more than 2500 tons in different grades of stainless steel pipes

304 stainless steel pipe 500tons

304L stainless steel pipe 200tons

316L stainless steel pipe 300tons

duplex 2205 stainless steel pipe 300tons

super duplex uns s32750 / 2507 pipe 200tons

321 stainless steel pipe 200tons

310s stainless steel pipe 200tons

904L stainless steel pipe 150tons

astm a790 / a789 uns s31803 pipe 200tons

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Larson Tool Implements New Online Metalforming Program to Help Educate Employees

Attleboro, MA -- (ReleaseWire) -- 08/06/2019 -- Larson Tool & Stamping Company recently collaborated with Precision Metalforming Association (PMA) to develop a catalogue of online training courses specific to the metalforming industry. Larson Tool President, Chuck Cederberg, serves on the educational Committee for PMA and helped lead the exploration into what types of online education platforms were currently on the market and which would be the best fit for PMA's project. Eventually PMA's education committee decided on an appropriate platform and launched METALFORM EDU in October 2018.

METALFORM EDU is a unique online training program that helps companies enhance their own talent pipeline by providing them access to highly-focused, on-demand training. The program comes complete with over 100 industry-specific courses on subjects ranging from onboarding, press operation, die setting, CNC, and much more. Larson now utilizes the online program for its own operations and can specify which courses will be best suited for a new-hire—providing specific training for entry-level courses and adding additional courses and training as the employee advances or shows interest in other career paths in the industry.

Noting the skills gap prevalent in manufacturing today, Bill Jordan, Larson's Human Resources Manager, said, "Having this program available allows me to hire an employee who has manufacturing experience, but who might not have metalforming knowledge. This program bridges the information gap and accelerates learning, enabling them to be a good press operator. It drastically reduces the learning curve, getting employees up and running, working safely, and producing quality parts."

Larson Tool is one of the founding members of PMA, and is committed to creating a sustainable metalforming workforce and ensuring industry knowledge remains intact and accessible to people pursuing careers in manufacturing. Of the program, Cederberg said, "This represents another milestone in our ongoing commitment to training and creating successful futures for those coming up in the trades. Larson is proud to have many leadership positions filled—past and present—with people who graduated from technical vocational schools. The right education ensures our combined success. We've been thrilled to be involved in the piloting of the METALFORMING EDU program, and look forward to using it to help our employees gain knowledge and industry expertise."

To learn more about the PMA program click here. For more information about Larson Tool & Stamping, visit www.larsontool.com or call (508) 222-0897.

About Larson Tool
Larson Tool & Stamping is based in Attleboro, MA and is a trusted supplier of precision metal stamping parts and components to a wide number of industries in the United States. Larson's innovative and highly specialized capabilities range from complex progressive die stampings and deep drawn cylinders to value-added, forming, welding, and assembly operations.
Larson Tool specializes in deep drawn components and offers many full-service solutions. The combination of having a dedicated workforce, state-of-the-art metal stamping facility, and control of all in-house processes enables Larson Tool to meet delivery schedules with the highest quality metal stamping products at competitive pricing.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Engineering-driven tool and stamping company will be at FABTECH to meet with attendees

Attleboro, MA -- (ReleaseWire) -- 10/22/2018 -- Larson Tool & Stamping Company will be exhibiting at the upcoming FABTECH 2018, North America's largest metal forming, fabricating, welding, and finishing event. The event will be held in Atlanta, GA at the Georgia World Congress Center from November 6 through 8. Along with live demonstrations, expo sessions cover a variety of topics, including 3D printing, lasers and industrial innovations, roll forming, coil processing, welding, robotics, machine safety, and lean principles, among many others. Larson can be found at booth #A1338 and will be displaying samples of deep drawn and metal formed components and assemblies.

Neil Fonger, Larson's Sales and Marketing Manager, said, "The representatives at our booth have many years of experience in metal forming. They will be happy to answer attendees' questions about metal stamping and deep draw processes. We're looking forward to connecting with visitors who stop by our booth and learning how we can help them with their current production needs, or their next product development project."

Show floor admission is complimentary for people who register by November 2—register for free admission by clicking here. To learn more about Larson Tool & Stamping, visit www.larsontool.com or call 508-222-0897.

About Larson Tool & Stamping
Larson Tool & Stamping is based in Attleboro, MA and is a trusted supplier of precision metal stamping parts and components to a wide number of industries in the United States. Larson's innovative and highly specialized capabilities range from complex progressive die stampings and deep drawn cylinders to value-added, forming, welding, and assembly operations.

Larson Tool specializes in deep drawn components and offers many full-service solutions. The combination of having a dedicated workforce, state-of-the-art metal stamping facility, and control of all in-house processes enables Larson Tool to meet delivery schedules with the highest quality metal stamping products at competitive pricing.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Amsterdam, Netherlands -- (ReleaseWire) -- 08/28/2018 -- Arcluster, the market research and consulting firm, forecasts the Dredge Automation market to reach $5.23 billion in 2023, in its latest and most comprehensive study on the Worldwide Dredge Automation Market [by Segments; by Systems (Control, Monitoring, Operations, Reporting); by Solutions (Turnkey, Retrofit); by Applications (Agriculture, Industrial, Restoration, Mining, Waterways)]: Market Sizes and Forecasts (2018 – 2023). Arcluster forecasts substantial market growth for both automated turnkey and retrofit deployments across multiple applications and regions.

https://arcluster.com/research/studies/dredge-automation-market/

Dredging companies have been looking for automation solutions to deliver enhanced control, reduce operational complexity and thereby manage financial and cost efficiencies.

"Addressing these requirements leads the rise of Dredge Automation, a solution platform of components, software, systems, and services, that can be delivered as a fully automated turnkey solution or as automated retrofits across multiple applications". said Arun Nirmal, Research Director at Arcluster. "The Dredge Automation market is a niche technical opportunity for small, medium, and large dredging market players as well as for shipbuilders, equipment manufacturers, technology suppliers, contractors, and integrators."

Arcluster's report on the Dredge Automation market spans 130 pages and includes 97 market data tables, figures, and charts. Dredge Automation Market Size and Forecasts are provided by

- Segments: Components, Software, Services (Design and Consulting, Implementation and Integration, Maintenance and Support)
- Systems: Control, Monitoring, Operations, Reporting, Others
- Solutions: Fully Automated Turnkey; Automated Retrofits
- Applications: Agriculture, Industrial, Restoration, Mining, Waterways, Construction, Environment, Specialty, Others
- Regions: North America; Europe; Asia Pacific; Central America/ Latin America; Middle-East, and Africa.

Market data in the report is highly useful for market players, vendors, service providers, integrators, consultants, and venture capital firms. Buy the report at https://arcluster.com/research/studies/dredge-automation-market/

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

MICRALOX® for Licensing Expands Further Worldwide

Woonsocket, RI -- (ReleaseWire) -- 08/22/2018 -- Sanford Process Corporation, a sister company of Precision Coating, Inc., is pleased to announce the issuance of a South Korean patent on June 21, 2018, protecting the novel intellectual property behind its MICRALOX® microcrystalline anodic coating technology. The new patent, number 10-1871702, extends the patent coverage beyond previously issued patents in the U.S., Japan, and China. The assignee is Sanford Process Corporation.

Developed and licensed by Sanford Process Corporation, MICRALOX® microcrystalline aluminum anodic coating is designed specifically for applications where conventional anodizing and hard coat anodizing fail to protect the finish from corrosion, chemical attack, and steam discoloration. The patent marks increased acceptance and adoption of MICRALOX® worldwide.

Jack Tetrault, President of SPC, said, "MICRALOX®, and the advances of its second-generation technologies, MICRALOX Lumina® and Ultra® are changing the landscape of anodized aluminum in the medical industry. In large part, due to MICRALOX® coated aluminum parts holding exceptional resistance to strong chemistries and corrosive environments such as repetitive cleaning and sterilization, it dramatically outperforms its conventionally coated counterparts. In fact, MICRALOX® Ultra provides +50X the chemical resistance compared to decorative Type II anodizing, while—whether left natural, or dyed one of nine vivid colors—MICRALOX® Lumina coatings achieve up to 50X the resistance in a hot alkaline strip test compared to Type II decorative anodizing. We are proud of the relentless research and development that allows us to offer the licensing for this revolutionary chemistry to medical suppliers across the globe."

While MICRALOX® retains typical anodic coating properties such as abrasion resistance, hardness/chip resistance, and dielectric properties, it is extremely stable in the presence of corrosive saltwater conditions, strong acid and alkaline chemicals, and superheated steam. It is an ideal finishing solution for challenging applications that require periodic cleaning, sterilization, harsh chemicals, detergents, and exposure to corrosive galvanic environments. MICRALOX® has been proven in independent laboratory testing to extend the life of aluminum medical devices, instruments, and equipment. It is also cytotox and RoHS compliant. MICRALOX® protects the aluminum and eliminates the need for chromium seals, plastic coatings, or the use of more expensive metals. MICRALOX® can also be dyed in a range of bright and vibrant colors.

For more information on MICRALOX®, visit www.micralox.com, www.precisioncoating.com, or call 1-855-876-0781.

About Sanford Process Corporation
Sanford Process Corporation provides hard coat anodizing solutions, as well as licenses the company's intellectual property, to a range of well-known OEMs and their prime subcontractors worldwide. Specialized metal finishing services are conducted through its sister company, Precision Coating, an industry leader in PTFE coating application and technical aluminum anodizing, permanent printing, and other related services. Precision Coating seeks to improve health outcomes by enhancing the surfaces of medical devices and instruments worldwide through innovative, high-tolerance, and validated coating and printing processes in the interventional, orthopedic, endoscopic, and general surgical sectors. Precision Coating works with early-stage device innovators through major medical equipment manufacturers, deploying comprehensive solutions—from concept to commercialization—and offering flexible prototype work through high-volume coating application, finishing, and printing services. With facilities in Hudson, MA, Woonsocket, RI, and San Jose, Costa Rica, Precision Coating provides seamless supply chain support, fulfilling the exacting demands of medical manufacturing companies across an increasing number of strategic geographic hubs.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Precision Metal Stamping Solutions Provider, Larson Tool, Presents a New Look

Attleboro, MA -- (ReleaseWire) -- 07/18/2018 -- Larson Tool & Stamping Company, a fourth-generation, family-owned company is a trusted supplier of precision metal stampings to hundreds of manufacturers and OEMs. Based in Attleboro, MA, Larson has over 90 years of experience in precision metal stamping and deep draw expertise. Known for its innovative culture and reliability in exceeding customer expectations, Larson has a reputable brand within the industry and continues to experience significant growth. Larson remains competitive through significant investment in leading-edge manufacturing equipment, continuous improvement initiatives, including internal training and apprenticeship programs. Larson's most recent investment is the unveiling of its new logo and customer-oriented website, created in collaboration with Boston-based B2B marketing agency, Grant Marketing.

Larson's website presents a completely new look, user-friendly navigation, an in-depth corporate video, and a pictorial tour of the facility. The new color palate replaces the previous blue/orange palette used for many years. In its place is a muted gray, light blue, with yellow scheme that refreshes the company brand with modern, sophisticated appeal. In addition, changes were made to the titles and content of certain pages to ensure customers can easily access immediate, accurate, and reliable information for all their precision metal stamping needs. The user experience was at the forefront of the website redesign, with emphasis placed on enhancing navigation and creating seamless integrations between the site's multiple pages. The last piece of the website is Larson Tool's recently released corporate video, offering visitors an inside view of the company's philosophy and facility.

In addition to rolling out a new website, Larson also made significant changes to its brand logo. The previous logo, an oval, with Larson (since 1920) inside, was a classic mark. The revamped design features the writing "Tool & Stamping" incorporated into the logo, making a stronger statement of Larson's capabilities than the previous logo, while paying homage to Larson's longevity. The new design is more balanced, modern, and speaks to the precision with which Larson Tool & Stamping is known for in the metal forming industry.

For more information on Larson Tool and its capabilities, click on the link to see the new website at www.larsontool.com.

About Larson Tool & Stamping Company
Founded in 1920 in Attleboro, MA, Larson Tool & Stamping Company engineers precision metal stamping solutions to solve today's demanding supply chain challenges. Larson sets the benchmark for stamping excellence, continually adding value for customers by investing in, innovating, and improving upon processes, materials sourcing, and lean manufacturing initiatives. Larson has built a reputation for quality and dependability as a valued supplier of precision metal stampings and assemblies to hundreds of companies in the United States. Larson provides high-quality, cost-effective solutions with its wide range of capabilities that include forming, stamping, deep drawing, assembly, brazing, painting, coining, and more. Through significant investment in leading-edge manufacturing equipment and the loyal support from customers and co-workers, Larson perpetuates the commitment made by its founders to do whatever is necessary to meet and exceed customer expectations.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Simpsonville, SC -- (ReleaseWire) -- 01/11/2018 -- Better Box Mailboxes is an innovative company that offers numerous products and accessories, including 2-inch brass mailbox numbers. Unfortunately, a lot of businesses that sell products for homeowners cut corners. They partner with manufacturers that provide them with cheap, low-quality merchandise on the wholesale level. The retail price is ratcheted up considerably, and at the end of the day, consumers pay much more than they should for inferior goods.

Things are entirely different for people that purchase mailboxes, 2-inch brass mailbox numbers, and other mailbox accessories from Better Box Mailboxes. This company sets the standard for quality because of the way that they go about things. First of all, they do not obtain their products from a third-party. They manufacture their mailboxes in their own facility, so they have total control.

They hire highly qualified, skilled artisans that use time-tested techniques to produce stunning, eye-catching cast aluminum curbside mailboxes, wall-mounted mailboxes, and brick mailbox doors. Aluminum is a nonferrous metal, so it is highly resistant to rust and corrosion. As a result, the mailboxes are durable and long-lasting, but they are lightweight and easy to ship and install.

The same level of care is put into the hardware and the 2-inch brass mailbox numbers. Brass is also a nonferrous metal, so it will maintain its integrity for years. These numbers are extremely easy to install. Though they are solid brass, they are affixed to the mailbox number plate through the utilization of 3M automotive trim sticky tape adhesion. There is a clear coat that provides a lasting luster, and they can be easily replaced if the mailboxes are moved to a different address.

Even though the quality is impeccable, they offer them at unbelievably low prices. The same thing applies to the mailboxes that the company produces. Since they ship everything from their own production facility, there is no "middleman" in the loop, and this helps them keep their prices at a minimum.

Plus, this company stands behind their products with a 100 percent customer satisfaction guarantee. When you combine all of the factors, it is clear that Better Box Mailboxes is the right choice for anyone that needs 2-inch brass mailbox numbers.

Shop brass mailbox numbers by visiting this link - https://www.betterboxmailboxes.com/mailboxes/our-accessories/brass-mailbox-numbers/.

About Better Box Mailboxes
Better Box Mailboxes is the premier online source for 2-inch brass mailbox numbers.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm

Simpsonville, SC -- (ReleaseWire) -- 10/04/2017 -- Mail theft is of greater concern today than ever before. One's identity can be compromised in an instant. Better Box Mailboxes is a company that produces a beautiful line of secure locking mailboxes. Allowing one to leave home and have confidence that if the mail carrier comes, that mail will be safe upon one's return.

The materials that they utilize are carefully selected, and this is one of the reasons why Better Box Mailboxes locking mailboxes maintain a safe haven for mail for decades to come. Top quality cast aluminum is at the core, which is a nonferrous metal that will never rust. They add a DuPont finish to provide more protection, and the stainless steel and brass hardware is rust-proof as well. In addition to weatherproofing, the locking mailboxes are also resistant to nosy neighbors and vandals.

Better Box Mailboxes offers a number of different options, including single, double and quadruple locking mailboxes. There are multiple colors available, including white, black, bronze, and verde, and a paper box can also be added. They ship out all orders within 24 hours of receiving them, and they do not charge their customers for shipping.

The company is located in South Carolina, and they take a lot of pride in their work. Providing the finest quality secure locking mailbox available at any price level. All locking mailboxes come with the original door, but there is also the ability to change the original door and locking door out based on needs. Some customers only want the locking door while out of town or on vacation.

Check out their website for the complete locking mailbox lineup, if interested in a beautiful locking mailbox that will protect correspondences for decades, Better Box Mailboxes has the right mailbox.

About Better Box Mailboxes
Better Box Mailboxes is a highly respected nationwide company that offers an extensive line of locking mailboxes that are shipped directly from their facility.

For more information on this press release visit: http://www.releasewire.com/press-releases/release-3.htm